1. 14 7月, 2008 2 次提交
  2. 18 4月, 2008 4 次提交
    • A
      firewire: cleanups · db8be076
      Adrian Bunk 提交于
      This patch contains the following cleanups:
      - #if 0 the following unused structs:
        - fw-transaction.c:fw_low_memory_region
        - fw-transaction.c:fw_private_region
        - fw-transaction.c:fw_csr_region
        - fw-transaction.c:fw_unit_space_region
      - remove the following unused EXPORT_SYMBOL's:
        - fw-card.c:fw_core_add_descriptor
        - fw-card.c:fw_core_remove_descriptor
        - fw-iso.c:fw_iso_context_create
        - fw-iso.c:fw_iso_context_destroy
        - fw-iso.c:fw_iso_context_start
        - fw-iso.c:fw_iso_context_queue
        - fw-iso.c:fw_iso_context_stop
      Signed-off-by: NAdrian Bunk <bunk@kernel.org>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      db8be076
    • S
      firewire: fix synchronization of gap counts · 25b1c3d8
      Stefan Richter 提交于
      Fix:  The fact that nodes had different gap counts would be overlooked
      if the bus manager code would pick gap count 63 because of beta
      repeaters or because of very large hop counts.  In this case, the bus
      manager code would miss that it actually has to send the PHY config
      packet with gap count 63.
      
      Related trivial changes:  Use bool for an int used as bool, touch up
      some comments.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      25b1c3d8
    • S
      firewire: reread config ROM when device reset the bus · c9755e14
      Stefan Richter 提交于
      When a device changes its configuration ROM, it announces this with a
      bus reset.  firewire-core has to check which node initiated a bus reset
      and whether any unit directories went away or were added on this node.
      
      Tested with an IOI FWB-IDE01AB which has its link-on bit set if bus
      power is available but does not respond to ROM read requests if self
      power is off.  This implements
        - recognition of the units if self power is switched on after fw-core
          gave up the initial attempt to read the config ROM,
        - shutdown of the units when self power is switched off.
      
      Also tested with a second PC running Linux/ieee1394.  When the eth1394
      driver is inserted and removed on that node, fw-core now notices the
      addition and removal of the IPv4 unit on the ieee1394 node.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      c9755e14
    • S
      firewire: remove superfluous reference counting · bd7dee63
      Stefan Richter 提交于
      The card->kref became obsolete since patch "firewire: fix crash in
      automatic module unloading" added another counter of card users.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      Signed-off-by: NJarod Wilson <jwilson@redhat.com>
      bd7dee63
  3. 02 3月, 2008 2 次提交
    • S
      firewire: fix crash in automatic module unloading · 855c603d
      Stefan Richter 提交于
      "modprobe firewire-ohci; sleep .1; modprobe -r firewire-ohci" used to
      result in crashes like this:
      
          BUG: unable to handle kernel paging request at ffffffff8807b455
          IP: [<ffffffff8807b455>]
          PGD 203067 PUD 207063 PMD 7c170067 PTE 0
          Oops: 0010 [1] PREEMPT SMP
          CPU 0
          Modules linked in: i915 drm cpufreq_ondemand acpi_cpufreq freq_table applesmc input_polldev led_class coretemp hwmon eeprom snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss button thermal processor sg snd_hda_intel snd_pcm snd_timer snd snd_page_alloc sky2 i2c_i801 rtc [last unloaded: crc_itu_t]
          Pid: 9, comm: events/0 Not tainted 2.6.25-rc2 #3
          RIP: 0010:[<ffffffff8807b455>]  [<ffffffff8807b455>]
          RSP: 0018:ffff81007dcdde88  EFLAGS: 00010246
          RAX: ffff81007dc95040 RBX: ffff81007dee5390 RCX: 0000000000005e13
          RDX: 0000000000008c8b RSI: 0000000000000001 RDI: ffff81007dee5388
          RBP: ffff81007dc5eb40 R08: 0000000000000002 R09: ffffffff8022d05c
          R10: ffffffff8023b34c R11: ffffffff8041a353 R12: ffff81007dee5388
          R13: ffffffff8807b455 R14: ffffffff80593bc0 R15: 0000000000000000
          FS:  0000000000000000(0000) GS:ffffffff8055a000(0000) knlGS:0000000000000000
          CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
          CR2: ffffffff8807b455 CR3: 0000000000201000 CR4: 00000000000006e0
          DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
          DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
          Process events/0 (pid: 9, threadinfo ffff81007dcdc000, task ffff81007dc95040)
          Stack:  ffffffff8023b396 ffffffff88082524 0000000000000000 ffffffff8807d9ae
          ffff81007dc5eb40 ffff81007dc9dce0 ffff81007dc5eb40 ffff81007dc5eb80
          ffff81007dc9dce0 ffffffffffffffff ffffffff8023be87 0000000000000000
          Call Trace:
          [<ffffffff8023b396>] ? run_workqueue+0xdf/0x1df
          [<ffffffff8023be87>] ? worker_thread+0xd8/0xe3
          [<ffffffff8023e917>] ? autoremove_wake_function+0x0/0x2e
          [<ffffffff8023bdaf>] ? worker_thread+0x0/0xe3
          [<ffffffff8023e813>] ? kthread+0x47/0x74
          [<ffffffff804198e0>] ? trace_hardirqs_on_thunk+0x35/0x3a
          [<ffffffff8020c008>] ? child_rip+0xa/0x12
          [<ffffffff8020b6e3>] ? restore_args+0x0/0x3d
          [<ffffffff8023e68a>] ? kthreadd+0x14c/0x171
          [<ffffffff8023e68a>] ? kthreadd+0x14c/0x171
          [<ffffffff8023e7cc>] ? kthread+0x0/0x74
          [<ffffffff8020bffe>] ? child_rip+0x0/0x12
      
          Code:  Bad RIP value.
          RIP  [<ffffffff8807b455>]
          RSP <ffff81007dcdde88>
          CR2: ffffffff8807b455
          ---[ end trace c7366c6657fe5bed ]---
      
      Note that this crash happened _after_ firewire-core was unloaded.  The
      shared workqueue tried to run firewire-core's device initialization jobs
      or similar jobs.
      
      The fix makes sure that firewire-ohci and hence firewire-core is not
      unloaded before all device shutdown jobs have been completed.  This is
      determined by the count of device initializations minus device releases.
      
      Also skip useless retries in the node initialization job if the node is
      to be shut down.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      Signed-off-by: NJarod Wilson <jwilson@redhat.com>
      855c603d
    • S
      firewire: potentially invalid pointers used in fw_card_bm_work · 15803478
      Stefan Richter 提交于
      The bus management workqueue job was in danger to dereference NULL
      pointers.  Also, after having temporarily lifted card->lock, a few node
      pointers and a device pointer may have become invalid.
      
      Add NULL pointer checks and get the necessary references.  Also, move
      card->local_node out of fw_card_bm_work's sight during shutdown of the
      card.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      Signed-off-by: NJarod Wilson <jwilson@redhat.com>
      15803478
  4. 26 8月, 2007 1 次提交
  5. 10 7月, 2007 1 次提交
  6. 01 6月, 2007 1 次提交
  7. 11 5月, 2007 6 次提交
  8. 18 4月, 2007 1 次提交
  9. 29 3月, 2007 1 次提交
  10. 25 3月, 2007 1 次提交
  11. 10 3月, 2007 13 次提交