- 04 3月, 2015 10 次提交
-
-
由 Michel Marti 提交于
Since turning on idle-halt in commit fe46aa67 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: NMichel Marti <mma@objectxp.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Acked-by: NSylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet support for the at91rm9200. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Anthony Harivel 提交于
Recent distributions and userspace tools after 2009/2010 depend on the existence of /sys/class/block/, and will not work with this option enabled. Signed-off-by: NAnthony Harivel <anthony.harivel@emtrion.de> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Jonas Andersson 提交于
Corrected pins used by usart3. Signed-off-by: NJonas Andersson <jonas@microbit.se> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexander Stein 提交于
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base address for sram0 and sram1 leading to the following warning: WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70() sysfs: cannot create duplicate filename '/devices/platform/300000.sram' Fix the base address for sram1. Signed-off-by: NAlexander Stein <alexanders83@web.de> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: NWenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
at91rm9200 standby and suspend to ram has been broken since 00482a40. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a40 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Peter Rosin 提交于
The DDRSDR controller fails miserably to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Assume that the second controller has the same fault, but that is untested. Signed-off-by: NPeter Rosin <peda@axentia.se> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Sylvain Rochet 提交于
Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if something went wrong instead of continuing in unknown condition. There is not much we can do if a PLL lock never ends, we are running in SRAM and we will not be able to connect back the sdram or ddram in order to be able to fire up a message or just panic. As a bonus, not decounting the timeout register in slow clock mode reduce cumulated suspend time and resume time from ~17ms to ~15ms. Signed-off-by: NSylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: NWenyou.Yang <wenyou.yang@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 23 2月, 2015 1 次提交
-
-
由 David Howells 提交于
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 2月, 2015 2 次提交
-
-
由 Niklas Cassel 提交于
Commit e9de688d ("irqchip: mips-gic: Support local interrupts") updated several platforms. This is a copy paste error. Signed-off-by: NNiklas Cassel <niklass@axis.com> Reviewed-by: NAndrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9245/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andreas Ruprecht 提交于
In commit c441d4a5 ("MIPS: mm: Only build one microassembler that is suitable"), the Makefile at arch/mips/mm was rewritten to only build the "right" microassembler file, depending on whether CONFIG_CPU_MICROMIPS is set or not. In the files, however, there are still preprocessor definitions depending on CONFIG_CPU_MICROMIPS. The #ifdef around them can now never evaluate to true, so let's remove them altogether. This inconsistency was found using the undertaker-checkpatch tool. Signed-off-by: NAndreas Ruprecht <rupran@einserver.de> Reviewed-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Valentin Rothberg <valentinrothberg@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Patchwork: https://patchwork.linux-mips.org/patch/9267/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 2月, 2015 27 次提交
-
-
由 David Daney 提交于
- Use of_irq_init() to initialize interrupt controllers - Get rid of some unlikely() - Add CIB to support SATA and other interrupts - Add support for CIU SUM2 interrupt sources Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NLeonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: NPeter Swain <peter.swain@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8947/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The acknowledge bits don't exist for level triggered irqs, so setting them causes the simulator to terminate. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NLeonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8946/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chandrakala Chavva 提交于
Read clock rate from the correct CSR. Don't clear COP0_DCACHE for OCTEONIII. Signed-off-by: NChandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8945/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chad Reese 提交于
CN38XX pass 1 required icache prefetching to be turned off. This chip never reached production and is long dead. Other processor specific icache settings are done by the bootloader. Remove these bits from the kernel. Signed-off-by: NChad Reese <kreese@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8944/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8943/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Add coverage for OCTEON III models. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8942/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Make messages refer to all CN6XXX. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8941/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Also update union octeon_cvmemctl with new OCTEON II fields. [aleksey.makarov@auriga.com: use __BITFIELD_FIELD] Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8940/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Disable ICache prefetch for certian Octeon II processors. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8938/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aleksey Makarov 提交于
Commit 2c952e06 ("MIPS: Move cop2 save/restore to switch_to()") removes assembler code to store COP2 registers. Commit a36d8225 ("MIPS: OCTEON: Enable use of FPU") mistakenly restores it Fixes: a36d8225 ("MIPS: OCTEON: Enable use of FPU") Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8937/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chandrakala Chavva 提交于
Use dmfc0/dmtc0 instructions for reading CvmMemCtl COP0 register, its a 64-bit wide. Signed-off-by: NChandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8936/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Allocate new save space, and then save/restore the registers if OCTEON III. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8935/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
It wasn't being saved on task switch. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8934/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The wide multiplier is twice as wide, so we need to save twice as much state. Detect the multiplier type (CPU type) at start up and install model specific handlers. [aleksey.makarov@auriga.com: conflict resolution, support for old compilers] Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NLeonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8933/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
Allow more compression algorithms as well as uncompressed uImage.bin to be generated. An uncompressed image might be useful to rule out problems in the decompression code in the bootloader or even speed up the boot process at the expense of a bigger uImage file. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9271/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8737/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Lars-Peter Clausen 提交于
There are currently no gio device drivers that implement suspend/resume and this patch removes the bus specific legacy suspend and resume callbacks. This will allow us to eventually remove struct bus_type legacy suspend and resume support altogether. gio device drivers wanting to implement suspend and resume can use dev PM ops which will work out of the box without further modifications necessary. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8920/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
Without these, there are multiple definitions of pci_proc_domain() and pci_domain_nr() if linux/pci.h and asm/pci.h are included. Add #ifdefs around them Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: NMarkos Chandras <Markos.Chandras@imgtec.com> Cc: Markos.Chandras@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8670/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
The current code uses bits 0-6 of the sys_cpupll register to calculate core clock speed. However this is only valid on Au1300, on all earlier models the hardware only uses bits 0-5 to generate core clock. This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll is set as well, which ultimately lead the code to calculate a bogus cpu core clock and also uart base clock down the line. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Reported-by: NJohn Crispin <blogic@openwrt.org> Tested-by: NBruno Randolf <br1@einfach.org> Cc: stable@vger.kernel.org [v3.17+] Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9279/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
set_cpuspec() has been dropped with commit 074cf656 ("MIPS: Alchemy: remove cpu_table.") in late 2008. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9150/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
This was lost during the rewrite of clock framework support. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9149/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
The Au1000 and Au1500 calculate the LRCLK a bit differently than newer models: a single bit in MEM_STCFG0 selects if pclk is divided by 4 or 5. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9148/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Steven J. Hill 提交于
Build set and clear macros for the PageGrain register. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexandre Courbot 提交于
There doesn't seem to be any valid reason to allocate the pages array with the same flags as the buffer itself. Doing so can eventually lead to the following safeguard in mm/slab.c's cache_grow() to be hit: if (unlikely(flags & GFP_SLAB_BUG_MASK)) { pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK); BUG(); } This happens when buffers are allocated with __GFP_DMA32 or __GFP_HIGHMEM. Fix this by allocating the pages array with GFP_KERNEL to follow what is done elsewhere in this file. Using GFP_KERNEL in __iommu_alloc_buffer() is safe because atomic allocations are handled by __iommu_alloc_atomic(). Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jiri Kosina 提交于
Commit f47233c2 ("x86/mm/ASLR: Propagate base load address calculation") causes PAGE_SIZE redefinition warnings for UML subarch builds. This is caused by added includes that were leftovers from previous patch versions are are not actually needed (especially page_types.h inlcude in module.c). Drop those stray includes. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1502201017240.28769@pobox.suse.czSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 David Vrabel 提交于
Since _PAGE_PROTNONE aliases _PAGE_GLOBAL it is only valid if _PAGE_PRESENT is clear. Make pte_protnone() and pmd_protnone() check for this. This fixes a 64-bit Xen PV guest regression introduced by 8a0516ed ("mm: convert p[te|md]_numa users to p[te|md]_protnone_numa"). Any userspace process would endlessly fault. In a 64-bit PV guest, userspace page table entries have _PAGE_GLOBAL set by the hypervisor. This meant that any fault on a present userspace entry (e.g., a write to a read-only mapping) would be misinterpreted as a NUMA hinting fault and the fault would not be correctly handled, resulting in the access endlessly faulting. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-