Implements freelist randomization for the SLUB allocator.  It was
previous implemented for the SLAB allocator.  Both use the same
configuration option (CONFIG_SLAB_FREELIST_RANDOM).

The list is randomized during initialization of a new set of pages.  The
order on different freelist sizes is pre-computed at boot for
performance.  Each kmem_cache has its own randomized freelist.

This security feature reduces the predictability of the kernel SLUB
allocator against heap overflows rendering attacks much less stable.

For example these attacks exploit the predictability of the heap:
 - Linux Kernel CAN SLUB overflow (https://goo.gl/oMNWkU)
 - Exploiting Linux Kernel Heap corruptions (http://goo.gl/EXLn95)

Performance results:

slab_test impact is between 3% to 4% on average for 100000 attempts
without smp.  It is a very focused testing, kernbench show the overall
impact on the system is way lower.

Before:

  Single thread testing
  =====================
  1. Kmalloc: Repeatedly allocate then free test
  100000 times kmalloc(8) -> 49 cycles kfree -> 77 cycles
  100000 times kmalloc(16) -> 51 cycles kfree -> 79 cycles
  100000 times kmalloc(32) -> 53 cycles kfree -> 83 cycles
  100000 times kmalloc(64) -> 62 cycles kfree -> 90 cycles
  100000 times kmalloc(128) -> 81 cycles kfree -> 97 cycles
  100000 times kmalloc(256) -> 98 cycles kfree -> 121 cycles
  100000 times kmalloc(512) -> 95 cycles kfree -> 122 cycles
  100000 times kmalloc(1024) -> 96 cycles kfree -> 126 cycles
  100000 times kmalloc(2048) -> 115 cycles kfree -> 140 cycles
  100000 times kmalloc(4096) -> 149 cycles kfree -> 171 cycles
  2. Kmalloc: alloc/free test
  100000 times kmalloc(8)/kfree -> 70 cycles
  100000 times kmalloc(16)/kfree -> 70 cycles
  100000 times kmalloc(32)/kfree -> 70 cycles
  100000 times kmalloc(64)/kfree -> 70 cycles
  100000 times kmalloc(128)/kfree -> 70 cycles
  100000 times kmalloc(256)/kfree -> 69 cycles
  100000 times kmalloc(512)/kfree -> 70 cycles
  100000 times kmalloc(1024)/kfree -> 73 cycles
  100000 times kmalloc(2048)/kfree -> 72 cycles
  100000 times kmalloc(4096)/kfree -> 71 cycles

After:

  Single thread testing
  =====================
  1. Kmalloc: Repeatedly allocate then free test
  100000 times kmalloc(8) -> 57 cycles kfree -> 78 cycles
  100000 times kmalloc(16) -> 61 cycles kfree -> 81 cycles
  100000 times kmalloc(32) -> 76 cycles kfree -> 93 cycles
  100000 times kmalloc(64) -> 83 cycles kfree -> 94 cycles
  100000 times kmalloc(128) -> 106 cycles kfree -> 107 cycles
  100000 times kmalloc(256) -> 118 cycles kfree -> 117 cycles
  100000 times kmalloc(512) -> 114 cycles kfree -> 116 cycles
  100000 times kmalloc(1024) -> 115 cycles kfree -> 118 cycles
  100000 times kmalloc(2048) -> 147 cycles kfree -> 131 cycles
  100000 times kmalloc(4096) -> 214 cycles kfree -> 161 cycles
  2. Kmalloc: alloc/free test
  100000 times kmalloc(8)/kfree -> 66 cycles
  100000 times kmalloc(16)/kfree -> 66 cycles
  100000 times kmalloc(32)/kfree -> 66 cycles
  100000 times kmalloc(64)/kfree -> 66 cycles
  100000 times kmalloc(128)/kfree -> 65 cycles
  100000 times kmalloc(256)/kfree -> 67 cycles
  100000 times kmalloc(512)/kfree -> 67 cycles
  100000 times kmalloc(1024)/kfree -> 64 cycles
  100000 times kmalloc(2048)/kfree -> 67 cycles
  100000 times kmalloc(4096)/kfree -> 67 cycles

Kernbench, before:

  Average Optimal load -j 12 Run (std deviation):
  Elapsed Time 101.873 (1.16069)
  User Time 1045.22 (1.60447)
  System Time 88.969 (0.559195)
  Percent CPU 1112.9 (13.8279)
  Context Switches 189140 (2282.15)
  Sleeps 99008.6 (768.091)

After:

  Average Optimal load -j 12 Run (std deviation):
  Elapsed Time 102.47 (0.562732)
  User Time 1045.3 (1.34263)
  System Time 88.311 (0.342554)
  Percent CPU 1105.8 (6.49444)
  Context Switches 189081 (2355.78)
  Sleeps 99231.5 (800.358)

Link: http://lkml.kernel.org/r/1464295031-26375-3-git-send-email-thgarnie@google.comSigned-off-by: NThomas Garnier <thgarnie@google.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The CONFIG_VIRT_CPU_ACCOUNTING_GEN irq time tracking code does not
appear to currently work right.

On CPUs without nohz_full=, only tick based irq time sampling is
done, which breaks down when dealing with a nohz_idle CPU.

On firewalls and similar systems, no ticks may happen on a CPU for a
while, and the irq time spent may never get accounted properly. This
can cause issues with capacity planning and power saving, which use
the CPU statistics as inputs in decision making.

Remove the VTIME_GEN vtime irq time code, and replace it with the
IRQ_TIME_ACCOUNTING code, when selected as a config option by the user.
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1468421405-20056-3-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The "expert" menu was broken (split) such that all entries in it after
KALLSYMS were displayed in the "General setup" area instead of in the
"Expert users" area.  Fix this by adding one kconfig dependency.

Yes, the Expert users menu is fragile.  Problems like this have happened
several times in the past.  I will attempt to isolate the Expert users
menu if there is interest in that.

Fixes: 4d5d5664 ("x86: kallsyms: disable absolute percpu symbols on !SMP")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org  # 4.6
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I replaced kasprintf("%pf") with a direct call to
sprint_symbol_no_offset I must have broken the initcall blacklisting
feature on the arches where dereference_function_descriptor() is
non-trivial.

Fixes: c8cdd2be (init/main.c: simplify initcall_blacklisted())
Link: http://lkml.kernel.org/r/1466027283-4065-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We've had the thread info allocated together with the thread stack for
most architectures for a long time (since the thread_info was split off
from the task struct), but that is about to change.

But the patches that move the thread info to be off-stack (and a part of
the task struct instead) made it clear how confused the allocator and
freeing functions are.

Because the common case was that we share an allocation with the thread
stack and the thread_info, the two pointers were identical.  That
identity then meant that we would have things like

	ti = alloc_thread_info_node(tsk, node);
	...
	tsk->stack = ti;

which certainly _worked_ (since stack and thread_info have the same
value), but is rather confusing: why are we assigning a thread_info to
the stack? And if we move the thread_info away, the "confusing" code
just gets to be entirely bogus.

So remove all this confusion, and make it clear that we are doing the
stack allocation by renaming and clarifying the function names to be
about the stack.  The fact that the thread_info then shares the
allocation is an implementation detail, and not really about the
allocation itself.

This is a pure renaming and type fix: we pass in the same pointer, it's
just that we clarify what the pointer means.

The ia64 code that actually only has one single allocation (for all of
task_struct, thread_info and kernel thread stack) now looks a bit odd,
but since "tsk->stack" is actually not even used there, that oddity
doesn't matter.  It would be a separate thing to clean that up, I
intentionally left the ia64 changes as a pure brute-force renaming and
type change.
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Usermode Linux currently does not implement arch_irqs_disabled_flags(),
which results in a build failure in TASKS_RCU.  Therefore, this commit
disables the TASKS_RCU Kconfig option in usermode Linux builds.  The
usermode Linux maintainers expect to merge arch_irqs_disabled_flags()
into 4.8, at which point this commit may be reverted.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Acked-by: NRichard Weinberger <richard@nod.at>

page_ext_init() checks suitable pages with pfn_to_nid(), but
pfn_to_nid() depends on memmap which will not be setup fully until
page_alloc_init_late() is done.  Use early_pfn_to_nid() instead of
pfn_to_nid() so that page extension could be still used early even
though CONFIG_ DEFERRED_STRUCT_PAGE_INIT is enabled and catch early page
allocation call sites.

Suggested by Joonsoo Kim [1], this fix basically undoes the change
introduced by commit b8f1a75d ("mm: call page_ext_init() after all
struct pages are initialized") and fixes the same problem with a better
approach.

[1] http://lkml.kernel.org/r/CAAmzW4OUmyPwQjvd7QUfc6W1Aic__TyAuH80MLRZNMxKy0-wPQ@mail.gmail.com

Link: http://lkml.kernel.org/r/1464198689-23458-1-git-send-email-yang.shi@linaro.orgSigned-off-by: NYang Shi <yang.shi@linaro.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using kasprintf to get the function name makes us look up the name
twice, along with all the vsnprintf overhead of parsing the format
string etc.  It also means there is an allocation failure case to deal
with.  Since symbol_string in vsprintf.c would anyway allocate an array
of size KSYM_SYMBOL_LEN on the stack, that might as well be done up
here.

Moreover, since this is a debug feature and the blacklisted_initcalls
list is usually empty, we might as well test that and thus avoid looking
up the symbol name even once in the common case.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Testing has shown that the backtrace sometimes does not fit into the 4kB
temporary buffer that is used in NMI context.  The warnings are gone
when I double the temporary buffer size.

This patch doubles the buffer size and makes it configurable.

Note that this problem existed even in the x86-specific implementation
that was added by the commit a9edc880 ("x86/nmi: Perform a safe NMI
stack trace on all CPUs").  Nobody noticed it because it did not print
any warnings.
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc880 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When DEFERRED_STRUCT_PAGE_INIT is enabled, just a subset of memmap at
boot are initialized, then the rest are initialized in parallel by
starting one-off "pgdatinitX" kernel thread for each node X.

If page_ext_init is called before it, some pages will not have valid
extension, this may lead the below kernel oops when booting up kernel:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
  PGD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in:
  CPU: 11 PID: 106 Comm: pgdatinit1 Not tainted 4.6.0-rc5-next-20160427 #26
  Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009
  task: ffff88017c080040 ti: ffff88017c084000 task.ti: ffff88017c084000
  RIP: 0010:[<ffffffff8118d982>]  [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
  RSP: 0000:ffff88017c087c48  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
  RDX: 0000000000000980 RSI: 0000000000000080 RDI: 0000000000660401
  RBP: ffff88017c087cd0 R08: 0000000000000401 R09: 0000000000000009
  R10: ffff88017c080040 R11: 000000000000000a R12: 0000000000000400
  R13: ffffea0019810000 R14: ffffea0019810040 R15: ffff88066cfe6080
  FS:  0000000000000000(0000) GS:ffff88066cd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000002406000 CR4: 00000000000006e0
  Call Trace:
    free_hot_cold_page+0x192/0x1d0
    __free_pages+0x5c/0x90
    __free_pages_boot_core+0x11a/0x14e
    deferred_free_range+0x50/0x62
    deferred_init_memmap+0x220/0x3c3
    kthread+0xf8/0x110
    ret_from_fork+0x22/0x40
  Code: 49 89 d4 48 c1 e0 06 49 01 c5 e9 de fe ff ff 4c 89 f7 44 89 4d b8 4c 89 45 c0 44 89 5d c8 48 89 4d d0 e8 62 c7 07 00 48 8b 4d d0 <48> 8b 00 44 8b 5d c8 4c 8b 45 c0 44 8b 4d b8 a8 02 0f 84 05 ff
  RIP  [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
   RSP <ffff88017c087c48>
  CR2: 0000000000000000

Move page_ext_init() after page_alloc_init_late() to make sure page extension
is setup for all pages.

Link: http://lkml.kernel.org/r/1463696006-31360-1-git-send-email-yang.shi@linaro.orgSigned-off-by: NYang Shi <yang.shi@linaro.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provides an optional config (CONFIG_SLAB_FREELIST_RANDOM) to randomize
the SLAB freelist.  The list is randomized during initialization of a
new set of pages.  The order on different freelist sizes is pre-computed
at boot for performance.  Each kmem_cache has its own randomized
freelist.  Before pre-computed lists are available freelists are
generated dynamically.  This security feature reduces the predictability
of the kernel SLAB allocator against heap overflows rendering attacks
much less stable.

For example this attack against SLUB (also applicable against SLAB)
would be affected:

  https://jon.oberheide.org/blog/2010/09/10/linux-kernel-can-slub-overflow/

Also, since v4.6 the freelist was moved at the end of the SLAB.  It
means a controllable heap is opened to new attacks not yet publicly
discussed.  A kernel heap overflow can be transformed to multiple
use-after-free.  This feature makes this type of attack harder too.

To generate entropy, we use get_random_bytes_arch because 0 bits of
entropy is available in the boot stage.  In the worse case this function
will fallback to the get_random_bytes sub API.  We also generate a shift
random number to shift pre-computed freelist for each new set of pages.

The config option name is not specific to the SLAB as this approach will
be extended to other allocators like SLUB.

Performance results highlighted no major changes:

Hackbench (running 90 10 times):

  Before average: 0.0698
  After average: 0.0663 (-5.01%)

slab_test 1 run on boot.  Difference only seen on the 2048 size test
being the worse case scenario covered by freelist randomization.  New
slab pages are constantly being created on the 10000 allocations.
Variance should be mainly due to getting new pages every few
allocations.

Before:

  Single thread testing
  =====================
  1. Kmalloc: Repeatedly allocate then free test
  10000 times kmalloc(8) -> 99 cycles kfree -> 112 cycles
  10000 times kmalloc(16) -> 109 cycles kfree -> 140 cycles
  10000 times kmalloc(32) -> 129 cycles kfree -> 137 cycles
  10000 times kmalloc(64) -> 141 cycles kfree -> 141 cycles
  10000 times kmalloc(128) -> 152 cycles kfree -> 148 cycles
  10000 times kmalloc(256) -> 195 cycles kfree -> 167 cycles
  10000 times kmalloc(512) -> 257 cycles kfree -> 199 cycles
  10000 times kmalloc(1024) -> 393 cycles kfree -> 251 cycles
  10000 times kmalloc(2048) -> 649 cycles kfree -> 228 cycles
  10000 times kmalloc(4096) -> 806 cycles kfree -> 370 cycles
  10000 times kmalloc(8192) -> 814 cycles kfree -> 411 cycles
  10000 times kmalloc(16384) -> 892 cycles kfree -> 455 cycles
  2. Kmalloc: alloc/free test
  10000 times kmalloc(8)/kfree -> 121 cycles
  10000 times kmalloc(16)/kfree -> 121 cycles
  10000 times kmalloc(32)/kfree -> 121 cycles
  10000 times kmalloc(64)/kfree -> 121 cycles
  10000 times kmalloc(128)/kfree -> 121 cycles
  10000 times kmalloc(256)/kfree -> 119 cycles
  10000 times kmalloc(512)/kfree -> 119 cycles
  10000 times kmalloc(1024)/kfree -> 119 cycles
  10000 times kmalloc(2048)/kfree -> 119 cycles
  10000 times kmalloc(4096)/kfree -> 121 cycles
  10000 times kmalloc(8192)/kfree -> 119 cycles
  10000 times kmalloc(16384)/kfree -> 119 cycles

After:

  Single thread testing
  =====================
  1. Kmalloc: Repeatedly allocate then free test
  10000 times kmalloc(8) -> 130 cycles kfree -> 86 cycles
  10000 times kmalloc(16) -> 118 cycles kfree -> 86 cycles
  10000 times kmalloc(32) -> 121 cycles kfree -> 85 cycles
  10000 times kmalloc(64) -> 176 cycles kfree -> 102 cycles
  10000 times kmalloc(128) -> 178 cycles kfree -> 100 cycles
  10000 times kmalloc(256) -> 205 cycles kfree -> 109 cycles
  10000 times kmalloc(512) -> 262 cycles kfree -> 136 cycles
  10000 times kmalloc(1024) -> 342 cycles kfree -> 157 cycles
  10000 times kmalloc(2048) -> 701 cycles kfree -> 238 cycles
  10000 times kmalloc(4096) -> 803 cycles kfree -> 364 cycles
  10000 times kmalloc(8192) -> 835 cycles kfree -> 404 cycles
  10000 times kmalloc(16384) -> 896 cycles kfree -> 441 cycles
  2. Kmalloc: alloc/free test
  10000 times kmalloc(8)/kfree -> 121 cycles
  10000 times kmalloc(16)/kfree -> 121 cycles
  10000 times kmalloc(32)/kfree -> 123 cycles
  10000 times kmalloc(64)/kfree -> 142 cycles
  10000 times kmalloc(128)/kfree -> 121 cycles
  10000 times kmalloc(256)/kfree -> 119 cycles
  10000 times kmalloc(512)/kfree -> 119 cycles
  10000 times kmalloc(1024)/kfree -> 119 cycles
  10000 times kmalloc(2048)/kfree -> 119 cycles
  10000 times kmalloc(4096)/kfree -> 119 cycles
  10000 times kmalloc(8192)/kfree -> 119 cycles
  10000 times kmalloc(16384)/kfree -> 119 cycles

[akpm@linux-foundation.org: propagate gfp_t into cache_random_seq_create()]
Signed-off-by: NThomas Garnier <thgarnie@google.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CC_OPTIMIZE_FOR_SIZE disables the often useful -Wmaybe-unused warning,
because that causes a ridiculous amount of false positives when combined
with -Os.

This means a lot of warnings don't show up in testing by the developers
that should see them with an 'allmodconfig' kernel that has
CC_OPTIMIZE_FOR_SIZE enabled, but only later in randconfig builds
that don't.

This changes the Kconfig logic around CC_OPTIMIZE_FOR_SIZE to make
it a 'choice' statement defaulting to CC_OPTIMIZE_FOR_PERFORMANCE
that gets added for this purpose. The allmodconfig and allyesconfig
kernels now default to -O2 with the maybe-unused warning enabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMichal Marek <mmarek@suse.com>

Newer Fedora and OpenSUSE didn't boot with my standard configuration.
It took me some time to figure out why, in fact I had to write a script
to try different config options systematically.

The problem is that something (systemd) in dracut depends on
CONFIG_FHANDLE, which adds open by file handle syscalls.

While it is set in defconfigs it is very easy to miss when updating
older configs because it is not default y.

Make it default y and also depend on EXPERT, as dracut use is likely
widespread.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The config option to enable it all.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>

Similar to how relative extables are implemented, it is possible to emit
the kallsyms table in such a way that it contains offsets relative to
some anchor point in the kernel image rather than absolute addresses.

On 64-bit architectures, it cuts the size of the kallsyms address table
in half, since offsets between kernel symbols can typically be expressed
in 32 bits.  This saves several hundreds of kilobytes of permanent
.rodata on average.  In addition, the kallsyms address table is no
longer subject to dynamic relocation when CONFIG_RELOCATABLE is in
effect, so the relocation work done after decompression now doesn't have
to do relocation updates for all these values.  This saves up to 24
bytes (i.e., the size of a ELF64 RELA relocation table entry) per value,
which easily adds up to a couple of megabytes of uncompressed __init
data on ppc64 or arm64.  Even if these relocation entries typically
compress well, the combined size reduction of 2.8 MB uncompressed for a
ppc64_defconfig build (of which 2.4 MB is __init data) results in a ~500
KB space saving in the compressed image.

Since it is useful for some architectures (like x86) to retain the
ability to emit absolute values as well, this patch also adds support
for capturing both absolute and relative values when
KALLSYMS_ABSOLUTE_PERCPU is in effect, by emitting absolute per-cpu
addresses as positive 32-bit values, and addresses relative to the
lowest encountered relative symbol as negative values, which are
subtracted from the runtime address of this base symbol to produce the
actual address.

Support for the above is enabled by default for all architectures except
IA-64 and Tile-GX, whose symbols are too far apart to capture in this
manner.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NKees Cook <keescook@chromium.org>
Tested-by: NKees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

scripts/kallsyms.c has a special --absolute-percpu command line option
which deals with the zero based per cpu offsets that are used when
building for SMP on x86_64.  This means that the option should only be
passed in that case, so add a Kconfig symbol with the correct predicate,
and use that instead.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NKees Cook <keescook@chromium.org>
Tested-by: NKees Cook <keescook@chromium.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use list_for_each_entry() instead of list_for_each() to simplify the code.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trivial correction in menuconfig help to reflect PIDs as
controller instead of subsystem to align to rest of the text
and documentation.
Signed-off-by: NParav Pandit <pandit.parav@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Move the RSA EMSA-PKCS1-v1_5 encoding from the asymmetric-key public_key
subtype to the rsa crypto module's pkcs1pad template.  This means that the
public_key subtype no longer has any dependencies on public key type.

To make this work, the following changes have been made:

 (1) The rsa pkcs1pad template is now used for RSA keys.  This strips off the
     padding and returns just the message hash.

 (2) In a previous patch, the pkcs1pad template gained an optional second
     parameter that, if given, specifies the hash used.  We now give this,
     and pkcs1pad checks the encoded message E(M) for the EMSA-PKCS1-v1_5
     encoding and verifies that the correct digest OID is present.

 (3) The crypto driver in crypto/asymmetric_keys/rsa.c is now reduced to
     something that doesn't care about what the encryption actually does
     and and has been merged into public_key.c.

 (4) CONFIG_PUBLIC_KEY_ALGO_RSA is gone.  Module signing must set
     CONFIG_CRYPTO_RSA=y instead.

Thoughts:

 (*) Should the encoding style (eg. raw, EMSA-PKCS1-v1_5) also be passed to
     the padding template?  Should there be multiple padding templates
     registered that share most of the code?
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

Handle the smpboot threads in the state machine.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.295777684@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Move the split out steps into a callback array and let the cpu_up/down
code iterate through the array functions. For now most of the
callbacks are asymmetric to resemble the current hotplug maze.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182340.671816690@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

It may be useful to debug writes to the readonly sections of memory,
so provide a cmdline "rodata=off" to allow for this. This can be
expanded in the future to support "log" and "write" modes, but that
will need to be architecture-specific.

This also makes KDB software breakpoints more usable, as read-only
mappings can now be disabled on any kernel.
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-3-git-send-email-keescook@chromium.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Lockdep is initialized at compile time now.  Get rid of lockdep_init().
Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: mm-commits@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

What CONFIG_INET and CONFIG_LEGACY_KMEM guard inside the memory
controller code is insignificant, having these conditionals is not
worth the complication and fragility that comes with them.

[akpm@linux-foundation.org: rework mem_cgroup_css_free() statement ordering]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let the user know that CONFIG_MEMCG_KMEM does not apply to the cgroup2
interface. This also makes legacy-only code sections stand out better.

[arnd@arndb.de: mm: memcontrol: only manage socket pressure for CONFIG_INET]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make initrd_load() return bool due to this particular function only using
either one or zero as its return value.

No functional change.
Signed-off-by: NYaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make obsolete_checksetup() return bool due to this particular function
only using either one or zero as its return value.

No functional change.
Signed-off-by: NYaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

uselib hasn't been used since libc5; glibc does not use it.  Deprecate
uselib a bit more, by making the default y only if libc5 was widely used
on the plaform.

This makes arm64 kernel built with defconfig slightly smaller

bloat-o-meter:
  add/remove: 0/3 grow/shrink: 0/2 up/down: 0/-1390 (-1390)
  function                                     old     new   delta
  kernel_config_data                         18164   18162      -2
  uselib_flags                                  20       -     -20
  padzero                                      216     192     -24
  sys_uselib                                   380       -    -380
  load_elf_library                             964       -    -964
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To the best of our knowledge, everyone who enables audit at compile
time also enables syscall auditing; this patch simplifies the Kconfig
menus by removing the option to disable syscall auditing when audit
is selected and the target arch supports it.
Signed-off-by: NPaul Moore <pmoore@redhat.com>

The brd driver has never supported the ramdisk_blocksize kernel
parameter that was in the rd driver it replaced, so remove
mention of this parameter from comments and Documentation.

Commit 9db5579b ("rewrite rd") replaced rd with brd, keeping
a brd_blocksize variable in struct brd_device but never using it.

Commit a2cba291 ("brd: get rid of unused members from struct
brd_device") removed the unused variable.

Commit f5abc8e7 ("Documentation/blockdev/ramdisk.txt: updates")
removed mentions of ramdisk_blocksize from that file.
Signed-off-by: NRobert Elliott <elliott@hpe.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

To make it easier to quickly find what's needed list the basic
resource controllers of cgroup2 first - io, memory, cpu - while
pushing the more exotic and/or legacy controllers to the bottom.

tj: Removed spurious "&& CGROUPS" from CGROUP_PERF as suggested by Li.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NZefan Li <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The config options for the different cgroup controllers use various
terms: resource controller, cgroup subsystem, etc. Simplify this to
"controller", which is clear enough in the cgroup context.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently the full stop_machine() routine is only enabled on SMP if
module unloading is enabled, or if the CPUs are hotpluggable.  This
leads to configurations where stop_machine() is broken as it will then
only run the callback on the local CPU with irqs disabled, and not stop
the other CPUs or run the callback on them.

For example, this breaks MTRR setup on x86 in certain configs since
ea8596bb ("kprobes/x86: Remove unused text_poke_smp() and
text_poke_smp_batch() functions") as the MTRR is only established on the
boot CPU.

This patch removes the Kconfig option for STOP_MACHINE and uses the SMP
and HOTPLUG_CPU config options to compile the correct stop_machine() for
the architecture, removing the false dependency on MODULE_UNLOAD in the
process.

Link: https://lkml.org/lkml/2014/10/8/124
References: https://bugs.freedesktop.org/show_bug.cgi?id=84794Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This commit adds the invocation of rcu_end_inkernel_boot() just before
init is invoked.  This allows the CONFIG_RCU_EXPEDITE_BOOT Kconfig
option to do something useful and prepares for the upcoming
rcupdate.rcu_normal_after_boot kernel parameter.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Here is an implementation of a new system call, sys_membarrier(), which
executes a memory barrier on all threads running on the system.  It is
implemented by calling synchronize_sched().  It can be used to
distribute the cost of user-space memory barriers asymmetrically by
transforming pairs of memory barriers into pairs consisting of
sys_membarrier() and a compiler barrier.  For synchronization primitives
that distinguish between read-side and write-side (e.g.  userspace RCU
[1], rwlocks), the read-side can be accelerated significantly by moving
the bulk of the memory barrier overhead to the write-side.

The existing applications of which I am aware that would be improved by
this system call are as follows:

* Through Userspace RCU library (http://urcu.so)
  - DNS server (Knot DNS) https://www.knot-dns.cz/
  - Network sniffer (http://netsniff-ng.org/)
  - Distributed object storage (https://sheepdog.github.io/sheepdog/)
  - User-space tracing (http://lttng.org)
  - Network storage system (https://www.gluster.org/)
  - Virtual routers (https://events.linuxfoundation.org/sites/events/files/slides/DPDK_RCU_0MQ.pdf)
  - Financial software (https://lkml.org/lkml/2015/3/23/189)

Those projects use RCU in userspace to increase read-side speed and
scalability compared to locking.  Especially in the case of RCU used by
libraries, sys_membarrier can speed up the read-side by moving the bulk of
the memory barrier cost to synchronize_rcu().

* Direct users of sys_membarrier
  - core dotnet garbage collector (https://github.com/dotnet/coreclr/issues/198)

Microsoft core dotnet GC developers are planning to use the mprotect()
side-effect of issuing memory barriers through IPIs as a way to implement
Windows FlushProcessWriteBuffers() on Linux.  They are referring to
sys_membarrier in their github thread, specifically stating that
sys_membarrier() is what they are looking for.

To explain the benefit of this scheme, let's introduce two example threads:

Thread A (non-frequent, e.g. executing liburcu synchronize_rcu())
Thread B (frequent, e.g. executing liburcu
rcu_read_lock()/rcu_read_unlock())

In a scheme where all smp_mb() in thread A are ordering memory accesses
with respect to smp_mb() present in Thread B, we can change each
smp_mb() within Thread A into calls to sys_membarrier() and each
smp_mb() within Thread B into compiler barriers "barrier()".

Before the change, we had, for each smp_mb() pairs:

Thread A                    Thread B
previous mem accesses       previous mem accesses
smp_mb()                    smp_mb()
following mem accesses      following mem accesses

After the change, these pairs become:

Thread A                    Thread B
prev mem accesses           prev mem accesses
sys_membarrier()            barrier()
follow mem accesses         follow mem accesses

As we can see, there are two possible scenarios: either Thread B memory
accesses do not happen concurrently with Thread A accesses (1), or they
do (2).

1) Non-concurrent Thread A vs Thread B accesses:

Thread A                    Thread B
prev mem accesses
sys_membarrier()
follow mem accesses
                            prev mem accesses
                            barrier()
                            follow mem accesses

In this case, thread B accesses will be weakly ordered. This is OK,
because at that point, thread A is not particularly interested in
ordering them with respect to its own accesses.

2) Concurrent Thread A vs Thread B accesses

Thread A                    Thread B
prev mem accesses           prev mem accesses
sys_membarrier()            barrier()
follow mem accesses         follow mem accesses

In this case, thread B accesses, which are ensured to be in program
order thanks to the compiler barrier, will be "upgraded" to full
smp_mb() by synchronize_sched().

* Benchmarks

On Intel Xeon E5405 (8 cores)
(one thread is calling sys_membarrier, the other 7 threads are busy
looping)

1000 non-expedited sys_membarrier calls in 33s =3D 33 milliseconds/call.

* User-space user of this system call: Userspace RCU library

Both the signal-based and the sys_membarrier userspace RCU schemes
permit us to remove the memory barrier from the userspace RCU
rcu_read_lock() and rcu_read_unlock() primitives, thus significantly
accelerating them. These memory barriers are replaced by compiler
barriers on the read-side, and all matching memory barriers on the
write-side are turned into an invocation of a memory barrier on all
active threads in the process. By letting the kernel perform this
synchronization rather than dumbly sending a signal to every process
threads (as we currently do), we diminish the number of unnecessary wake
ups and only issue the memory barriers on active threads. Non-running
threads do not need to execute such barrier anyway, because these are
implied by the scheduler context switches.

Results in liburcu:

Operations in 10s, 6 readers, 2 writers:

memory barriers in reader:    1701557485 reads, 2202847 writes
signal-based scheme:          9830061167 reads,    6700 writes
sys_membarrier:               9952759104 reads,     425 writes
sys_membarrier (dyn. check):  7970328887 reads,     425 writes

The dynamic sys_membarrier availability check adds some overhead to
the read-side compared to the signal-based scheme, but besides that,
sys_membarrier slightly outperforms the signal-based scheme. However,
this non-expedited sys_membarrier implementation has a much slower grace
period than signal and memory barrier schemes.

Besides diminishing the number of wake-ups, one major advantage of the
membarrier system call over the signal-based scheme is that it does not
need to reserve a signal. This plays much more nicely with libraries,
and with processes injected into for tracing purposes, for which we
cannot expect that signals will be unused by the application.

An expedited version of this system call can be added later on to speed
up the grace period. Its implementation will likely depend on reading
the cpu_curr()->mm without holding each CPU's rq lock.

This patch adds the system call to x86 and to asm-generic.

[1] http://urcu.so

membarrier(2) man page:

MEMBARRIER(2)              Linux Programmer's Manual             MEMBARRIER(2)

NAME
       membarrier - issue memory barriers on a set of threads

SYNOPSIS
       #include <linux/membarrier.h>

       int membarrier(int cmd, int flags);

DESCRIPTION
       The cmd argument is one of the following:

       MEMBARRIER_CMD_QUERY
              Query  the  set  of  supported commands. It returns a bitmask of
              supported commands.

       MEMBARRIER_CMD_SHARED
              Execute a memory barrier on all threads running on  the  system.
              Upon  return from system call, the caller thread is ensured that
              all running threads have passed through a state where all memory
              accesses  to  user-space  addresses  match program order between
              entry to and return from the system  call  (non-running  threads
              are de facto in such a state). This covers threads from all pro=E2=80=90
              cesses running on the system.  This command returns 0.

       The flags argument needs to be 0. For future extensions.

       All memory accesses performed  in  program  order  from  each  targeted
       thread is guaranteed to be ordered with respect to sys_membarrier(). If
       we use the semantic "barrier()" to represent a compiler barrier forcing
       memory  accesses  to  be performed in program order across the barrier,
       and smp_mb() to represent explicit memory barriers forcing full  memory
       ordering  across  the barrier, we have the following ordering table for
       each pair of barrier(), sys_membarrier() and smp_mb():

       The pair ordering is detailed as (O: ordered, X: not ordered):

                              barrier()   smp_mb() sys_membarrier()
              barrier()          X           X            O
              smp_mb()           X           O            O
              sys_membarrier()   O           O            O

RETURN VALUE
       On success, these system calls return zero.  On error, -1 is  returned,
       and errno is set appropriately. For a given command, with flags
       argument set to 0, this system call is guaranteed to always return the
       same value until reboot.

ERRORS
       ENOSYS System call is not implemented.

       EINVAL Invalid arguments.

Linux                             2015-04-15                     MEMBARRIER(2)
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nicholas Miell <nmiell@comcast.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two kexec load syscalls, kexec_load another and kexec_file_load.
 kexec_file_load has been splited as kernel/kexec_file.c.  In this patch I
split kexec_load syscall code to kernel/kexec.c.

And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.

The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled.  But kexec-tools use
kexec_load syscall can bypass the checking.

Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel.  KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.

Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig.  Also updated general kernel code with to
kexec_load syscall.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to launch the usermodehelper kernel threads with the widest
affinity and this is partly why we use khelper.  This workqueue has
unbound properties and thus a wide affinity inherited by all its children.

Now khelper also has special properties that we aren't much interested in:
ordered and singlethread.  There is really no need about ordering as all
we do is creating kernel threads.  This can be done concurrently.  And
singlethread is a useless limitation as well.

The workqueue engine already proposes generic unbound workqueues that
don't share these useless properties and handle well parallel jobs.

The only worrysome specific is their affinity to the node of the current
CPU.  It's fine for creating the usermodehelper kernel threads but those
inherit this affinity for longer jobs such as requesting modules.

This patch proposes to use these node affine unbound workqueues assuming
that a node is sufficient to handle several parallel usermodehelper
requests.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An IPI is sent to flush remote TLBs when a page is unmapped that was
potentially accesssed by other CPUs.  There are many circumstances where
this happens but the obvious one is kswapd reclaiming pages belonging to a
running process as kswapd and the task are likely running on separate
CPUs.

On small machines, this is not a significant problem but as machine gets
larger with more cores and more memory, the cost of these IPIs can be
high.  This patch uses a simple structure that tracks CPUs that
potentially have TLB entries for pages being unmapped.  When the unmapping
is complete, the full TLB is flushed on the assumption that a refill cost
is lower than flushing individual entries.

Architectures wishing to do this must give the following guarantee.

        If a clean page is unmapped and not immediately flushed, the
        architecture must guarantee that a write to that linear address
        from a CPU with a cached TLB entry will trap a page fault.

This is essentially what the kernel already depends on but the window is
much larger with this patch applied and is worth highlighting.  The
architecture should consider whether the cost of the full TLB flush is
higher than sending an IPI to flush each individual entry.  An additional
architecture helper called flush_tlb_local is required.  It's a trivial
wrapper with some accounting in the x86 case.

The impact of this patch depends on the workload as measuring any benefit
requires both mapped pages co-located on the LRU and memory pressure.  The
case with the biggest impact is multiple processes reading mapped pages
taken from the vm-scalability test suite.  The test case uses NR_CPU
readers of mapped files that consume 10*RAM.

Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs

                                           4.2.0-rc1          4.2.0-rc1
                                             vanilla       flushfull-v7
Ops lru-file-mmap-read-elapsed      159.62 (  0.00%)   120.68 ( 24.40%)
Ops lru-file-mmap-read-time_range    30.59 (  0.00%)     2.80 ( 90.85%)
Ops lru-file-mmap-read-time_stddv     6.70 (  0.00%)     0.64 ( 90.38%)

           4.2.0-rc1    4.2.0-rc1
             vanilla flushfull-v7
User          581.00       611.43
System       5804.93      4111.76
Elapsed       161.03       122.12

This is showing that the readers completed 24.40% faster with 29% less
system CPU time.  From vmstats, it is known that the vanilla kernel was
interrupted roughly 900K times per second during the steady phase of the
test and the patched kernel was interrupts 180K times per second.

The impact is lower on a single socket machine.

                                           4.2.0-rc1          4.2.0-rc1
                                             vanilla       flushfull-v7
Ops lru-file-mmap-read-elapsed       25.33 (  0.00%)    20.38 ( 19.54%)
Ops lru-file-mmap-read-time_range     0.91 (  0.00%)     1.44 (-58.24%)
Ops lru-file-mmap-read-time_stddv     0.28 (  0.00%)     0.47 (-65.34%)

           4.2.0-rc1    4.2.0-rc1
             vanilla flushfull-v7
User           58.09        57.64
System        111.82        76.56
Elapsed        27.29        22.55

It's still a noticeable improvement with vmstat showing interrupts went
from roughly 500K per second to 45K per second.

The patch will have no impact on workloads with no memory pressure or have
relatively few mapped pages.  It will have an unpredictable impact on the
workload running on the CPU being flushed as it'll depend on how many TLB
entries need to be refilled and how long that takes.  Worst case, the TLB
will be completely cleared of active entries when the target PFNs were not
resident at all.

[sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows to select the userfaultfd during configuration to build it.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Cc: zhang.zhanghailiang@huawei.com
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>