Outstanding mailbox commands, have no way to recover on f/w hung, and we
timeout on waiting for mbx response. This in turn affects the recovery process
as follows:
 - We might already be in dpc while waiting for mbx to complete, so recovery for
   that pci function will never get invoked. Reset Timeout (10 sec) is far less
   than mbx timeout (30 sec).
 - Other mbx cmds will get stuck due to serial mbx access.

Solution is to identify fw-hung scenario and handle outstanding mbx commands to
have an early-exit instead of waiting for response.
Other mbx commands waiting for access will also do an early-exit if fw-hung is
still applicable.
Signed-off-by: NNilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Also, changed boundary checking from size of total
structure to verification that we received the amount of
data needed to cache inernally. This change will provide
compatibility with mbx_sys_info structure sizes in both
older and newer firmware versions.
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

If BIOS is enabled then drivers init firmware fails since
BIOS has done the init once.
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The rport port state and flags are set under the host lock,
so this patch calls fc_remote_port_chkready with the host lock
held like is also done in the other fc drivers.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Fake "address-of" expressions that evaluate to NULL generally confuse
readers and can provoke compiler warnings.  This patch (as1411)
removes one such fake expression introduced by:

commit db5bd1e0
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Thu Jun 17 10:36:49 2010 -0400

    [SCSI] convert to the new PM framework
 
using an "#ifdef" in its place.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

iscsi_boot_sysfs does not depend on firmware. Any iscsi driver
can use it. This patch moves iscsi_boot_sysfs to the scsi
dir, so that it can be used on any arch with any driver.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

be2iscsi uses iscsi_boot_*() interfaces, so it should ensure that
ISCSI_BOOT_SYSFS is enabled.

ERROR: "iscsi_boot_create_target" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_ethernet" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_host_kset" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_initiator" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_destroy_kset" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch increases the max_sectors to 2048
Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch contains changes for adding support for iscsi_boot.
Have modified to make read of mac address from chip as a function.

  The mac_address is being cached after teh first call as it is
not expected to change
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This driver is the only user of dma_is_consistent(). We plan to remove
this API.

The driver uses the API in the following way:

BUG_ON(!dma_is_consistent(hostdata->dev, pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());

The above code tries to see if L1_CACHE_BYTES is greater than
dma_get_cache_alignment() on sysmtes that can not allocate coherent
memory (some old systems can't).

James Bottomley exmplained that this is necesary because the driver
packs the set of mailboxes into a single coherent area and separates
the different usages by a L1 cache stride. So it's fatal if the dma
coherence stride is greater than the L1 cache size.

He also pointed out that we can kill this checking because we don't
hit this BUG_ON on all architectures that actually use the driver.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits)
  agp: intel-agp: do not use PCI resources before pci_enable_device()
  agp: efficeon-agp: do not use PCI resources before pci_enable_device()
  drm: kill BKL from common code
  drm/kms: Simplify setup of the initial I2C encoder config.
  drm,io-mapping: Specify slot to use for atomic mappings
  drm/radeon/kms: only expose underscan on avivo chips
  drm/radeon: add new pci ids
  drm: Cleanup after failing to create master->unique and dev->name
  drm/radeon: tone down overchatty acpi debug messages.
  drm/radeon/kms: enable underscan option for digital connectors
  drm/radeon/kms: fix calculation of h/v scaling factors
  drm/radeon/kms/igp: sideport is AMD only
  drm/radeon/kms: handle the case of no active displays properly in the bandwidth code
  drm: move ttm global code to core drm
  drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it.
  drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors
  drm/radeon/kms: make sure rio_mem is valid before unmapping it
  drm/agp/i915: trim stolen space to 32M
  drm/i915: Unset cursor if out-of-bounds upon mode change (v4)
  drm/i915: Unreference object not handle on creation
  ...

* 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,docs: Update the kgdb docs to include kms
  drm_fb_helper: Preserve capability to use atomic kms
  i915: when kgdb is active display compression should be off
  drm/i915: use new fb debug hooks
  drm: add KGDB/KDB support
  fb: add hooks to handle KDB enter/exit
  kgdboc: Add call backs to allow kernel mode switching
  vt,console,kdb: automatically set kdb LINES variable
  vt,console,kdb: implement atomic console enter/leave functions

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  debug_core,kdb: fix crash when arch does not have single step
  kgdb,x86: use macro HBP_NUM to replace magic number 4
  kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  mm,kdb,kgdb: Add a debug reference for the kdb kmap usage
  KGDB: Remove set but unused newPC
  ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump
  ftrace,kdb: Extend kdb to be able to dump the ftrace buffer
  kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE
  arm,kgdb: Add ability to trap into debugger on notify_die
  gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
  gdbstub: Implement gdbserial 'p' and 'P' packets
  kgdb,arm: Individual register get/set for arm
  kgdb,mips: Individual register get/set for mips
  kgdb,x86: Individual register get/set for x86
  kgdb,kdb: individual register set and and get API
  gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
  kgdb: remove custom hex_to_bin()implementation

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  apparmor: depends on NET

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/dtc: Fix a resource leak
  Documentation: fix ubuntu distro name
  MAINTAINERS: Update kbuild git URLs
  Add support for the C variable in the coccicheck script
  Add scripts/coccinelle/deref_null.cocci
  Add scripts/coccinelle/err_cast.cocci
  Add scripts/coccinelle/resource_size.cocci
  Add scripts/coccinelle/alloc/kzalloc-simple.cocci
  Add scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
  Add Documentation/coccinelle.txt
  Add a target to use the Coccinelle checker
  scripts: decodecode: remove bashisms
  Makefile: clarify a comment
  checkkconfigsymbols.sh: Kconfig symbols sometimes have lowercase letters
  scripts: add nconf into gitignore file

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Change section of generated debian packages to kernel
  kbuild: Mark that the packages generated conform to Standards-Version 3.8.4
  kbuild: Add homepage field to debian/control file

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (26 commits)
  kconfig: add savedefconfig
  kconfig: code refactoring in confdata.c
  kconfig: refactor code in symbol.c
  kconfig: add alldefconfig
  kconfig: print more info when we see a recursive dependency
  kconfig: save location of config symbols
  kconfig: change nonint_oldconfig to listnewconfig
  kconfig: rename loose_nonint_oldconfig => oldnoconfig
  kconfig: use long options in conf
  kconfig: fix MODULES-related bug in case of no .config
  kconfig: make randconfig fair for booleans
  kconfig: Don't write invisible choice values
  kbuild: Warn on selecting symbols with unmet direct dependencies
  scripts:conf.c Fix warning: variable 'type' set but not used
  menuconfig: truncate list items
  menuconfig: fix to center checklist correctly in a corner case
  xconfig: add support to show hidden options which have prompts
  xconfig: remove unused function
  xconfig: clean up
  gconfig: fix null pointer warning
  ...

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  modpost: support objects with more than 64k sections
  trivial: fix a typo in a filename
  frv: clean up arch/frv/Makefile
  kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line
  kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line
  Kbuild: Add option to set -femit-struct-debug-baseonly
  Makefile: "make kernelrelease" should show the correct full kernel version
  Makefile.build: make KBUILD_SYMTYPES work again

* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: cleanup comments, remove noinline
  module: group post-relocation functions into post_relocation()
  module: move module args strndup_user to just before use
  module: pass load_info into other functions
  module: fix sysfs cleanup for !CONFIG_SYSFS
  module: sysfs cleanup
  module: layout_and_allocate
  module: fix crash in get_ksymbol() when oopsing in module init
  module: kallsyms functions take struct load_info
  module: refactor out section header rewriting: FIX modversions
  module: refactor out section header rewriting
  module: add load_info
  module: reduce stack usage for each_symbol()
  module: refactor load_module part 5
  module: refactor load_module part 4
  module: refactor load_module part 3
  module: refactor load_module part 2
  module: refactor load_module
  module: module_unload_init() cleanup

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio_blk: Remove VBID ioctl
  virtio_blk: Add 'serial' attribute to virtio-blk devices (v2)
  virtio_blk: support barriers without FLUSH feature

* 'upstream/xen' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/panic: use xen_reboot and fix smp_send_stop
  Xen: register panic notifier to take crashes of xen guests on panic
  xen: support large numbers of CPUs with vcpu info placement
  xen: drop xen_sched_clock in favour of using plain wallclock time
  pvops: do not notify callers from register_xenstore_notifier
  Introduce CONFIG_XEN_PVHVM compile option
  blkfront: do not create a PV cdrom device if xen_hvm_guest
  support multiple .discard.* sections to avoid section type conflicts
  xen/pvhvm: fix build problem when !CONFIG_XEN
  xenfs: enable for HVM domains too
  x86: Call HVMOP_pagetable_dying on exit_mmap.
  x86: Unplug emulated disks and nics.
  x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
  implement O_NONBLOCK for /proc/xen/xenbus
  xen: Fix find_unbound_irq in presence of ioapic irqs.
  xen: Add suspend/resume support for PV on HVM guests.
  xen: Xen PCI platform device driver.
  x86/xen: event channels delivery on HVM.
  x86: early PV on HVM features initialization.
  xen: Add support for HVM hypercalls.
  ...

I'm trying to generate a <set> of <book>s in docbook for wireless to
link together all the cfg80211 and mac80211 documentation.

However, docbook will generate "re01.html" anew for each book for the
first <refentry>, presumably due to a bug in the stylesheets.

An effective workaround is to use IDs for the filenames, which makes
them more descriptive as well, e.g.  API-enum-ieee80211-band.html.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixed some typos and wording.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update section 3.7 examples to reflect the current state of the
Makefiles used. Fix spelling and grammar errors along with flow of text.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update section 3.2 and 3.5 example, along with text in section 3.5
to reflect change.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update section 3.3 Loadable module goals - obj-m, from $(<module_name>-objs)
to $(<module_name>-y) for easier addition of conditional objects to the
module. The examples are also updated to reflect the current state of
each Makefile used.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trivial typo fixes.
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - sys_io_destroy(): acutually return -EINVAL if the context pointed to
   is invalidIndex: linux-2.6.33-rc4/fs/aio.c
 - sys_io_getevents(): An argument specifying timeout is not `when',
   but `timeout'.
 - sys_io_getevents(): Should describe what is returned if this syscall
   succeeds.
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits)
  powerpc/8xx: Add support for the MPC8xx based boards from TQC
  powerpc/85xx: Introduce support for the Freescale P1022DS reference board
  powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board
  powerpc/85xx: Change deprecated binding for 85xx-based boards
  powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge
  powerpc/tqm85xx: update PCI interrupt-map attribute
  powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale
  powerpc/fsl_pci: add quirk for mpc8308 pcie bridge
  powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards
  powerpc/85xx: Fix booting for P1021MDS boards
  powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards
  powerpc/85xx: kexec for SMP 85xx BookE systems
  powerpc/5200/i2c: improve i2c bus error recovery
  of/xilinxfb: update tft compatible versions
  powerpc/fsl-diu-fb: Support setting display mode using EDID
  powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings
  powerpc/5121: shared DIU framebuffer support
  powerpc/5121: move fsl-diu-fb.h to include/linux
  powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor
  powerpc/512x: add clock structure for Video-IN (VIU) unit
  ...

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits)
  microblaze: Add KGDB support
  microblaze: Support brki rX, 0x18 for user application debugging
  microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
  microblaze: Simplify syscall rutine
  microblaze: Move PT_MODE saving to delay slot
  microblaze: Fix _interrupt function
  microblaze: Fix _user_exception function
  microblaze: Put together addik instructions
  microblaze: Use delay slot in syscall macros
  microblaze: Save kernel mode in delay slot
  microblaze: Do not mix register saving and mode setting
  microblaze: Move SAVE_STATE upward
  microblaze: entry.S: Macro optimization
  microblaze: Optimize hw exception rutine
  microblaze: Implement clear_ums macro and fix SAVE_STATE macro
  microblaze: Remove additional setup for kernel_mode
  microblaze: Optimize SAVE_STATE macro
  microblaze: Remove additional loading
  microblaze: Completely remove working with R11 register
  microblaze: Do not setup BIP in _debug_exception
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  arch/sparc/mm: Use GFP_KERNEL
  MAINTAINERS: Add trailing slash to SBUS path.
  sbus: autoconvert trivial BKL users to private mutex

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] increase ia64 static per cpu area
  [IA64] Put ia64 config files on the Uwe Kleine-König diet
  [IA64] perfmon: convert to unlocked_ioctl
  [IA64] beautify vmlinux.lds.h

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits)
  MIPS: PowerTV: Separate PowerTV USB support from non-USB code
  MIPS: strip the un-needed sections of vmlinuz
  MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS
  MIPS: Clean up arch/mips/boot/compressed/decompress.c
  MIPS: Clean up arch/mips/boot/compressed/ld.script
  MIPS: Unify the suffix of compressed vmlinux.bin
  MIPS: PowerTV: Add Gaia platform definitions.
  MIPS: BCM47xx: Fix nvram_getenv return value.
  MIPS: Octeon: Allow more than 3.75GB of memory with PCIe
  MIPS: Clean up notify_die() usage.
  MIPS: Remove unused task_struct.trap_no field.
  Documentation: Mention that KProbes is supported on MIPS
  SAMPLES: kprobe_example: Make it print something on MIPS.
  MIPS: kprobe: Add support.
  MIPS: Add instrunction format for BREAK and SYSCALL
  MIPS: kprobes: Define regs_return_value()
  MIPS: Ritually kill stupid printk.
  MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts.
  MIPS: Octeon: Support 256 MSI on PCIe
  MIPS: Decode core number for R2 CPUs.
  ...

Update the kgdb docs to include information about kernel mode setting support.

[Randy Dunlap <rdunlap@xenotime.net>: grammatical corrections]

CC: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Disable PCI and nfsroot on simulation target
  xtensa: Add missing include in coprocessor.h
  xtensa: Fix the network driver for the simulator target
  xtensa: Shuffle include statements to fix linker script
  xtensa: Add -mforce-no-pic option is supported
  xtensa: Fixes due to bss boundary symbol name changes.
  xtensa: Fix linker script patch-up
  xtensa: Fix FLUSH_DCACHE macro for some variants.