Apparently g4x doesn't support audio over DP. Bspec lists the
bit as "Reserved for Audio Output Enable", and empirical evidence
tells us that the bit won't stick. So stop trying to enable DP
audio on g4x.

Link: https://patchwork.freedesktop.org/patch/msgid/20171129164303.18793-1-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103989Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

To execute a requests requires us to have first woken the device, using
the rpm wakeref (as the request needs to write to hardware to setup the
context/ppGTT and execute on the GPU). So call intel_runtime_pm_get()
around queuing the request; the request itself will then carry a wakeref
until completion.

References: https://bugs.freedesktop.org/show_bug.cgi?id=103994Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130094231.10405-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

When capturing the bo, we allocate an error object with an array of
min(vma->size, vma->node.size) pages, plus a bit for compression overhead.
However, when creating the fake vma to describe the bo, only one of the
sizes was filled in, resulting in a too small array. Through my and CI
testing, this was sufficient for the mostly empty NULL context as
it compressed well (or the out-of-bounds access simply didn't cause an
issue). However, in real workloads on Cannonlake, we were overflowing
that array and causing havoc with the random memory corruption.
Reported-by: NRafael Antognolli <rafael.antognolli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103964
Fixes: 4e90a6e2 ("drm/i915: Record default HW state in the GPU error state")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201001536.13941-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

drivers/gpu/drm/i915/i915_irq.c|3096 col 29| error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130125253.21405-1-chris@chris-wilson.co.ukReviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>

This comment predates atomic, and I think with the way we currently
track IPS, it's safe to enable this for the case we switch too.

Changes since v1:
- Keep IPS enabled when switching planes.
Changes since v2:
- Enable IPS when at least one plane is enabled. (Ville)
Changes since v3:
- Actually do what was advertised in v3, sigh! (Ville, CI)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122183906.47767-1-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

ips_enabled was used as a variable of whether IPS can be enabled or not,
but should be used to test whether IPS is actually enabled.

Changes since v1:
- Call needs_modeset on new crtc state. (Ville)
- IPS can be enabled with sprite plane enabled too. (Ville)
- Fix CDCLK vs IPS workaround. (Ville)
Changes since v2:
- Only re-enable fastset when inheriting mode. (Ville)
- Put the conditions for enabling and disabling IPS in a helper.
Changes since v3:
- Keep the max_cdclk workaround working. (Ville)
- Also check logical cdclk out of paranoia.
- Remove planes check from IPS disable function for initial disable.
- Remove assert_plane_enabled/disabled checks and use
  crtc_state->active_planes for hsw_enable_ips only, always allow
  calling hsw_disable_ips to disable it initially in hw.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122183901.47720-1-maarten.lankhorst@linux.intel.com
[mlankhorst: pipe_config -> crtc_state (Ville)]
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

We store a SW state of the t11_t12 timing in 100usec units but have to
program it in 100msec as required by HW. The rounding used during
programming means there will be a mismatch between the SW and HW states
of this value triggering a "PPS state mismatch" error. Avoid this by
storing the already rounded-up value in the SW state.

Note that we still calculate panel_power_cycle_delay with the finer
100usec granularity to avoid any needless waits using that version of
the delay.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903
Cc: joks <joks@linux.pl>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.com

If the HW is already wedged, attempting to submit a request will
generate an -EIO. If we tried this during suspend, we would abort
whereas all we want to do is to go sleep and throw away the corrupt
state.

Fixes: 5ab57c70 ("drm/i915: Flush logical context image out to memory upon suspend")
Testcase: igt/gem_eio/suspend
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130102951.14965-1-chris@chris-wilson.co.uk

Testing the texture read performance shows that the same tuning for
the SQ credits is needed on GLK as on BXT/APL. This has been also
confirmed by Altug from the HW team.

V4: Rebase + fix
Signed-off-by: NValtteri Rantala <valtteri.rantala@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (v1)
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511880305-12166-1-git-send-email-valtteri.rantala@intel.com

This patch makes v9.39 firmware as default firmware for KBL.

Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.

This update includes (since v9.14):

- DCC spec changes for BXT + DCT enabling
- Bug Fix for power conservation feature SLPC_DCC
- Scheduler 1-element submission during DCC cycles.
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix.  Correctly marking context for resubmission in
  Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- GuC Msg Channel Hang WA - Stall GUC for mmio access when IDI is low
  during CPD flow.
- Fix for submit queue over flow issue
- Enabling IBC on KBL GT3 15W, GT4 45W
- Disabling wrong device ID WA in production signed kernel
- Enabling WA for MSGCH hang issue upto required KBL stepping
- Clear forcewake in CSB when SQ is empty.
- 3Tries of GuC2CSME wake request
- During reset one parameter was not getting accounted
- Disable DCC 1-elem mode submission
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this
  check in.
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling Dynamic Render Power Well Hysteresis Programming for Compute
  Worklaods
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control
  Bit
- Aggressive DCC implementation for supported platforms.

v2: Rebase. Updated commit message.
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa<anusha.srivatsa@intel.com >
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-4-git-send-email-sagar.a.kamble@intel.com

This patch makes v9.29 firmware as default firmware for BXT.

Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.

This update includes (since v8.7):

- Added support to log media reset count for host to read it
- BXT WA for fixing MTP hangs. WaDisableDOPRenderClkGatingAtSubmit
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into
  1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- Springboard based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Enabled IBC for BXT
- Media engine Reset fix.  Correctly marking context for resubmission in
  Media Reset case.
- SLPC Dynamic RPe fix to resolve issues where incorrect frequency was set.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Clear forcewake in CSB when SQ is empty.
- SLPC IBC 1.6 for APL to ensure multiplier does not cap IA below Pe.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change. No functional change done as part of this
  check in.
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
  has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Fixing Issue with Default Guc Log changes for OCA using special Control
  Bit

v2: Rebase. Updated commit message.
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-3-git-send-email-sagar.a.kamble@intel.com

This patch makes v9.33 firmware as default firmware for SKL.

Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.

This update includes (since v6.1):

- HuC RSA Keys updated.
- Adding per engine preemption support in GuC scheduler
- Minor bug fixes.
- Added support to log media reset count for host to read it
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into
  1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix.  Correctly marking context for resubmission in
  Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- DCC consistency fix for SKL
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Enabled WA for MSGCH hang issue
- Clear forcewake in CSB when SQ is empty.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this
  check in.
- Enable decoupled freq for SKL GT4
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
  has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control
  Bit

v2: Rebase. Updated commit message.
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-2-git-send-email-sagar.a.kamble@intel.com

Sagar noticed the check can be consolidated between the engine stats
implementation and the PMU.

My first choice was a static inline helper but that got into include
ordering mess quickly fast so I went with a macro instead. At some point
we should perhaps looking into taking out the non-ringubffer bits from
intel_ringbuffer.h into a new intel_engine.h or something.

v2: Use engine->flags. (Chris Wilson)
v3: Rebase and mark GuC as not yet supported. (Chris Wilson)
v4: Move flag setting to intel_engines_reset_default_submission.
    (Chris Wilson)
v5: Move flag setting to logical_ring_setup.
v6: intel_engines_reset_default_submission is the wrong place to set the
    flag - it needs to be in execlists_set_default_submission. (Sagar)
v7: Flag setting in logical_ring_setup is not required. (Chris)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v6)
Link: https://patchwork.freedesktop.org/patch/msgid/20171129102805.22690-1-tvrtko.ursulin@linux.intel.com

Will be adding a new per-engine flags shortly so it makes sense
to consolidate.

v2: Keep the original code flow in intel_engine_cleanup_cmd_parser.
    (Joonas Lahtinen)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129082409.18189-1-tvrtko.ursulin@linux.intel.com

We seem to be missing some W/A for 2M pages and are getting
a hit on raw GPU read bandwidths (even 30%) even though the
GPU write bandwidths improve (even 10%).

For now, disable THP, which is our only practical source of
2M pages until we have a W/A for the issue.

v2:
- Be explicit that we talk about GPU bandwidths (Eero)
- s/deny/never/ because that's why (Chris)
Reported-by: NValtteri Rantala <valtteri.rantala@intel.com>
Fixes: b901bb89 ("drm/i915/gemfs: enable THP")
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Valtteri Rantala <valtteri.rantala@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Tested-by: NValtteri Rantala <valtteri.rantala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127091233.7001-1-joonas.lahtinen@linux.intel.com

In commit 0426c046 ("drm/i915/pmu: Only allow running on a single
CPU") I attempted to clarify the CPU hotplug logic in our PMU
implementation, but missed that a more logical error to return, when
attempting to initialize an event on a currently inactive CPU, is -EINVAL
rather than -ENODEV.

This is because i915 PMU explicitly disallows running counters on more
than one CPU at a time, and is not reporting that the requested CPU does
not exist, or is off-line.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128105515.21998-1-tvrtko.ursulin@linux.intel.com

Previously we would enable hotplug polling on the outputs immediately
upon construction. This would allow a very early hotplug event to
trigger before we had finishing setting up the driver to handle it.
Instead, move the output polling to the last step of registration, after
we have set up all handlers, including the fbdev configuration.

v2: Symmetrically turnoff the hotplug helper in unregister after the
fbdev is first synchronised then finalized. This stops a late hotplug
event being processed after the interrupts are disabled.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171128110147.28654-1-chris@chris-wilson.co.uk

The kerneldoc markup for i915_gem_timelines_mark_idle() was incorrect,
so take the opportunity to also convert it from the "mark_idle" to "park"
naming scheme.

drivers/gpu/drm/i915/i915_gem_timeline.c:120: warning: No description found for parameter 'i915'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127123054.20966-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Switch over from the non-descript dev_priv locals to i915.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123115338.10270-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Since the shrinker is registered and unregistered during
i915_driver_register and i915_driver_unregister, respectively, rename
the init/cleanup functions to match.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123115338.10270-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

It may be of interest to both compare the active HW context against the
default (aka NULL) context, to see what has been changed and if either are
corrupt.

v2: Rename the fake vma as fake.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171126220901.14735-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Even though all rendering should have been flushed at the end of the
previous requests, add an extra flush after switching to the
kernel_context. As the switch to the kernel_context is used when idling
the gpu (e.g. suspend), having an extra layer of paranoia to ensure
everything is flushed to memory seems sensible.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171126214856.23702-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Building i915 without backlight support results in a harmless warning
for intel_panel_set_backlight:

drivers/gpu/drm/i915/intel_panel.c:653:13: error: 'intel_panel_set_backlight' defined but not used [-Werror=unused-function]

This moves it into the CONFIG_BACKLIGHT_CLASS_DEVICE section that
its caller is in.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127151239.1813673-2-arnd@arndb.de

The alternative intel_backlight_device_register() definition apparently
never got used, but I have now run into a case of i915 being compiled
without CONFIG_BACKLIGHT_CLASS_DEVICE, resulting in a number of
identical warnings:

drivers/gpu/drm/i915/intel_drv.h:1739:12: error: 'intel_backlight_device_register' defined but not used [-Werror=unused-function]

This marks the function as 'inline', which was surely the original
intention here.

Fixes: 1ebaa0b9 ("drm/i915: Move backlight registration to connector registration")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127151239.1813673-1-arnd@arndb.de

As both the hotplug event and fbdev configuration run asynchronously, it
is possible for them to run concurrently. If configuration fails, we were
freeing the fbdev causing a use-after-free in the hotplug event.

<7>[ 3069.935211] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
<7>[ 3069.935225] [drm:drm_setup_crtcs] looking for cmdline mode on connector 77
<7>[ 3069.935229] [drm:drm_setup_crtcs] looking for preferred mode on connector 77 0
<7>[ 3069.935233] [drm:drm_setup_crtcs] found mode 3200x1800
<7>[ 3069.935236] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
<7>[ 3069.935253] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 43 (0,0)
<7>[ 3069.935323] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[ 3069.967737] general protection fault: 0000 [#1] PREEMPT SMP
<0>[ 3069.977453] ---------------------------------
<4>[ 3069.977457] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii prime_numbers mei i2c_hid pinctrl_geminilake pinctrl_intel [last unloaded: i915]
<4>[ 3069.977492] CPU: 1 PID: 15414 Comm: kworker/1:0 Tainted: G     U          4.14.0-CI-CI_DRM_3388+ #1
<4>[ 3069.977497] Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
<4>[ 3069.977508] Workqueue: events output_poll_execute
<4>[ 3069.977512] task: ffff880177734e40 task.stack: ffffc90001fe4000
<4>[ 3069.977519] RIP: 0010:__lock_acquire+0x109/0x1b60
<4>[ 3069.977523] RSP: 0018:ffffc90001fe7bb0 EFLAGS: 00010002
<4>[ 3069.977526] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000282 RCX: 0000000000000000
<4>[ 3069.977530] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880170d4efd0
<4>[ 3069.977534] RBP: ffffc90001fe7c70 R08: 0000000000000001 R09: 0000000000000000
<4>[ 3069.977538] R10: 0000000000000000 R11: ffffffff81899609 R12: ffff880170d4efd0
<4>[ 3069.977542] R13: ffff880177734e40 R14: 0000000000000001 R15: 0000000000000000
<4>[ 3069.977547] FS:  0000000000000000(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000
<4>[ 3069.977551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 3069.977555] CR2: 00007f7e8b7bcf04 CR3: 0000000003e0f000 CR4: 00000000003406e0
<4>[ 3069.977559] Call Trace:
<4>[ 3069.977565]  ? mark_held_locks+0x64/0x90
<4>[ 3069.977571]  ? _raw_spin_unlock_irq+0x24/0x50
<4>[ 3069.977575]  ? _raw_spin_unlock_irq+0x24/0x50
<4>[ 3069.977579]  ? trace_hardirqs_on_caller+0xde/0x1c0
<4>[ 3069.977583]  ? _raw_spin_unlock_irq+0x2f/0x50
<4>[ 3069.977588]  ? finish_task_switch+0xa5/0x210
<4>[ 3069.977592]  ? lock_acquire+0xaf/0x200
<4>[ 3069.977596]  lock_acquire+0xaf/0x200
<4>[ 3069.977600]  ? __mutex_lock+0x5e9/0x9b0
<4>[ 3069.977604]  _raw_spin_lock+0x2a/0x40
<4>[ 3069.977608]  ? __mutex_lock+0x5e9/0x9b0
<4>[ 3069.977612]  __mutex_lock+0x5e9/0x9b0
<4>[ 3069.977616]  ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0
<4>[ 3069.977621]  ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0
<4>[ 3069.977625]  drm_fb_helper_hotplug_event.part.19+0x16/0xa0
<4>[ 3069.977630]  output_poll_execute+0x8d/0x180
<4>[ 3069.977635]  process_one_work+0x22e/0x660
<4>[ 3069.977640]  worker_thread+0x48/0x3a0
<4>[ 3069.977644]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[ 3069.977649]  kthread+0x102/0x140
<4>[ 3069.977653]  ? process_one_work+0x660/0x660
<4>[ 3069.977657]  ? kthread_create_on_node+0x40/0x40
<4>[ 3069.977662]  ret_from_fork+0x27/0x40
<4>[ 3069.977666] Code: 8d 62 f8 c3 49 81 3c 24 e0 fa 3c 82 41 be 00 00 00 00 45 0f 45 f0 83 fe 01 77 86 89 f0 49 8b 44 c4 08 48 85 c0 0f 84 76 ff ff ff <f0> ff 80 38 01 00 00 8b 1d 62 f9 e8 01 45 8b 85 b8 08 00 00 85
<1>[ 3069.977707] RIP: __lock_acquire+0x109/0x1b60 RSP: ffffc90001fe7bb0
<4>[ 3069.977712] ---[ end trace 4ad012eb3af62df7 ]---

In order to keep the dev_priv->ifbdev alive after failure, we have to
avoid the free and leave it empty until we unload the module (which is
less than ideal, but a necessary evil for simplicity). Then we can use
intel_fbdev_sync() to serialise the hotplug event with the configuration.
The serialisation between the two was removed in commit 934458c2
("Revert "drm/i915: Fix races on fbdev""), but the use after free is much
older, commit 366e39b4 ("drm/i915: Tear down fbdev if initialization
fails")

Fixes: 366e39b4 ("drm/i915: Tear down fbdev if initialization fails")
Fixes: 934458c2 ("Revert "drm/i915: Fix races on fbdev"")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: NLukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125194155.355-1-chris@chris-wilson.co.uk

We should be consistent on naming of similar definitions.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124170239.29360-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Chris has discovered that RC6, RC6p and RC6pp counters are mutually
exclusive, and even that on some SNB SKUs you get RC6p increasing, and on
the others RC6.

Furthermore RC6p and RC6pp were only present starting from GEN6 until,
GEN7, not including Haswell.

All this combined makes it questionable whether we need to reserve new ABI
for these counters. One idea was to just combine them all under the RC6
counter to simplify things for userspace. So that is what this patch does.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124171331.17981-1-tvrtko.ursulin@linux.intel.com

Instead of sleeping for a fixed 1ms (roughly, depending on timer slack),
start with a small sleep and exponentially increase the sleep on each
cycle.

A good example of a beneficiary is the guc mmio communication channel.
Typically we expect (and so spin) for 10us for a quick response, but this
doesn't cover everything and so sometimes we fallback to the millisecond+
sleep. This incurs a significant delay in time-critical operations like
preemption (igt/gem_exec_latency), which can be improved significantly by
using a small sleep after the spin fails.

We've made this suggestion many times, but had little experimental data
to support adding the complexity.

v2: Bump the minimum usleep to 10us on advice of
Documentation/timers/timers-howto.txt (Tvrko)
v3: Specify min, max range for usleep intervals -- some code may
crucially depend upon and so want to specify the sleep pattern.

References: 1758b90e ("drm/i915: Use a hybrid scheme for fast register waits")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124130031.20761-2-chris@chris-wilson.co.uk

Since we know that the port is empty, we do not need to extract the
count from the old request it and copy it over to the new request, or
attempt to unref the NULL old request pointer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124130031.20761-1-chris@chris-wilson.co.uk

Our execlist emulation is intended to only use a maximum of 2 ports per
engine, so as to not overflow the wq. (By knowing the limits, we can
avoid having to handle the wq exhaustion.) However, upon adding
preemption, we lost the skip over the first port if set for the
non-preemption path. Restore it.
Reported-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: c41937fd ("drm/i915/guc: Preemption! With GuC")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124133745.5173-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>

The hardware always writes one or two bytes in the index portion of
an indexed transfer. Make sure the message we send as the index
doesn't have a zero length.

Cc: stable@vger.kernel.org
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 56f9eac0 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-3-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

We can only specify the one slave address to indexed reads/writes.
Make sure the messages we check are destined to the same slave
address before deciding to do an indexed transfer.

Cc: stable@vger.kernel.org
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 56f9eac0 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-2-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Averaging with the previous sample brings a small statistical improvement
to sampling counters, but can leek a little bit of state from a current
client to the next which mulls the border between past and present for
observing clients.

This is because on event enable clients record the current counter value
and use it as reference, but with rapid off-on event cycles, and due the
delayed nature of sampling timer self-disarm, previous sample value does
not get cleared under these circumstances.

Solution is to stop averaging with the previous sample. This has a small
downside of losing some precision with short and spiky signals, but the
alternatives look too complicated for the benefit.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124094959.10725-1-tvrtko.ursulin@linux.intel.com

Ensure that we build our test kernels with DEBUG_FS enabled as many of
our igt tests require poking around debugfs/dri.

This should also fixup the kbuild complaint that we tried to select
SW_SYNC without meeting its dependencies.

Reported-by: kbuild-all@01.org
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012092147.28986-1-chris@chris-wilson.co.uk

We are using intel_ prefix for all file names with hardware
related definitions. GuC registers also fall into this category.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171124095340.1500-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

While renaming i915_guc_submission.h to intel_guc_submission.h, update of
header guard name to _INTEL_GUC_SUBMISSION_H_ was missed.

References: a2695744 (drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|h)
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511511650-13756-1-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We do two things, both of which are purely to simplify and clarify the
implementation:

1.

Simplify the CPU online callback so it is more obvious that the purpose
there is to set a single CPU mask bit for the first CPU which comes
online. Using cpumask_weight for this reads more obvious than the trick
with cpumask_and_any.

2.

Modify the event init so that events can be created only on a single CPU.

This removes looking at the requested CPU thread siblings, and only allows
creating on the current active CPU.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123123432.25035-2-tvrtko.ursulin@linux.intel.com

Even for static CPU configurations, the hotplug CPU framework is still
used to determine the CPU topology, and is still being used by the perf
event register to check for valid CPUs.

Fixes: b46a33e2 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123123432.25035-1-tvrtko.ursulin@linux.intel.com

Since the removal of the delayed rc6 enabling, we now setup and drop the
early rpm wakeref during modules initialisation before we start the live
selftests. As such, we are now detecting errors in the tests where we
were not holding the required wakeref for various actions. As rpm is not
the primary goal of the tests involved, take a coarse and convenient rpm
wakeref around the tests.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123233712.21836-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>

We pretend the PMU config id is a pointer value when encoding it into
the device parameters for presentation via sysfs. This requires casting
of an unsigned long into and out of the pointer member, which annoys
smatch:

drivers/gpu/drm/i915/i915_pmu.c:684 i915_pmu_event_show() warn: argument 3 to %lx specifier is cast from pointer

Instead of abusing a generic dev_ext_attribute, define our own typesafe
attributes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123211751.2885-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>