In data=writeback mode, start an asynchronous flush when closing a
file which had been previously truncated down to zero.  This lowers
the probability of data loss in the case of applications that attempt
to replace a file using truncate.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Reformat ext3/ioctl.c to make it look more like ext4/ioctl.c and remove
the BKL around ext3_ioctl().
Signed-off-by: NCyrus Massoumi <cyrusm@gmx.net>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: NJan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At the moment there are few restrictions on which flags may be set on
which inodes.  Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links.  Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.

Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Acked-by: NAndreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At present INDEX is the only flag that new ext3 inodes do NOT inherit from
their parent.  In addition prevent the flags DIRTY, ECOMPR, IMAGIC and
TOPDIR from being inherited.  List inheritable flags explicitly to prevent
future flags from accidentally being inherited.

This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Acked-by: NAndreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original ext3 hash algorithms assumed that variables of type char
were signed, as God and K&R intended.  Unfortunately, this assumption
is not true on some architectures.  Userspace support for marking
filesystems with non-native signed/unsigned chars was added two years
ago, but the kernel-side support was never added (until now).
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org

If the journal doesn't abort when it gets an IO error in file data blocks,
the file data corruption will spread silently.  Because most of
applications and commands do buffered writes without fsync(), they don't
notice the IO error.  It's scary for mission critical systems.  On the
other hand, if the journal aborts whenever it gets an IO error in file
data blocks, the system will easily become inoperable.  So this patch
introduces a filesystem option to determine whether it aborts the journal
or just call printk() when it gets an IO error in file data.

If you mount a ext3 fs with data_err=abort option, it aborts on file data
write error.  If you mount it with data_err=ignore, it doesn't abort, just
call printk().  data_err=ignore is the default.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Any block based fs (this patch includes ext3) just has to declare its own
fiemap() function and then call this generic function with its own
get_block_t. This works well for block based filesystems that will map
multiple contiguous blocks at one time, but will work for filesystems that
only map one block at a time, you will just end up with an "extent" for each
block. One gotcha is this will not play nicely where there is hole+data
after the EOF. This function will assume its hit the end of the data as soon
as it hits a hole after the EOF, so if there is any data past that it will
not pick that up. AFAIK no block based fs does this anyway, but its in the
comments of the function anyway just in case.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org

If the orphan node list includes valid, untruncatable nodes with nlink > 0
the ext3_orphan_cleanup loop which attempts to delete them will not do so,
causing it to loop forever. Fix by checking for such nodes in the
ext3_orphan_get function.

This patch fixes the second case (image hdb.20000009.softlockup.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: printk warning fix]
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stop the EXT3 filesystem from using iget() and read_inode().  Replace
ext3_read_inode() with ext3_iget(), and call that instead of iget().
ext3_iget() then uses iget_locked() directly and returns a proper error code
instead of an inode in the event of an error.

ext3_fill_super() returns any error incurred when getting the root inode
instead of EINVAL.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: NJan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With 64KB blocksize, a directory entry can have size 64KB which does not
fit into 16 bits we have for entry lenght.  So we store 0xffff instead and
convert value when read from / written to disk.  The patch also converts
some places to use ext3_next_entry() when we are changing them anyway.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch set supports large block size(>4k, <=64k) in ext3 just enlarging
the block size limit.  But it is NOT possible to have 64kB blocksize on
ext3 without some changes to the directory handling code.  The reason is
that an empty 64kB directory block would have a rec_len == (__u16)2^16 ==
0, and this would cause an error to be hit in the filesystem.  The proposed
solution is treat 64k rec_len with a an impossible value like rec_len =
0xffff to handle this.

The Patch-set consists of the following 2 patches.
  [1/2]  ext3: enlarge blocksize
         - Allow blocksize up to pagesize

  [2/2]  ext3: fix rec_len overflow
         - prevent rec_len from overflow with 64KB blocksize

Now on 64k page ppc64 box runs with this patch set we could create a 64k
block size ext3, and able to handle empty directory block.
Signed-off-by: NTakashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_EXT3_INDEX is not an exposed config option in the kernel, and it is
unconditionally defined in ext3_fs.h.  tune2fs is already able to turn off
dir indexing, so at this point it's just cluttering up the code.  Remove
it.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A patch that stores inode flags such as S_IMMUTABLE, S_APPEND, etc.  from
i_flags to EXT3_I(inode)->i_flags when inode is written to disk.  The same
thing is done on GETFLAGS ioctl.

Quota code changes these flags on quota files (to make it harder for
sysadmin to screw himself) and these changes were not correctly propagated
into the filesystem (especially, lsattr did not show them and users were
wondering...).

Propagate flags such as S_APPEND, S_IMMUTABLE, etc.  from i_flags into
ext3-specific i_flags.  Hence, when someone sets these flags via a
different interface than ioctl, they are stored correctly.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the Ext3 device ioctl compat stuff from fs/compat_ioctl.c to the Ext3
driver so that the Ext3 header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move common FS-specific ioctls from linux/ext2_fs.h to linux/fs.h as FS_IOC_*
and FS_IOC32_* and have the users of them use those as a base.

Also move the GETFLAGS/SETFLAGS flags to linux/fs.h as FS_*_FL macros, and then
have the other users use them as a base.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixing up some endian-ness warnings in preparation to clone ext4 from ext3.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

More white space cleanups in preparation of cloning ext4 from ext3.
Removing spaces that precede a tab.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

The inode number out of an NFS file handle gets passed eventually to
ext3_get_inode_block() without any checking.  If ext3_get_inode_block()
allows it to trigger an error, then bad filehandles can have unpleasant
effect - ext3_error() will usually cause a forced read-only remount, or a
panic if `errors=panic' was used.

So remove the call to ext3_error there and put a matching check in
ext3/namei.c where inode numbers are read off storage.

[akpm@osdl.org: fix off-by-one error]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: <stable@kernel.org>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert the ext3 in-kernel filesystem blocks to ext3_fsblk_t.  Convert the
rest of all unsigned long type in-kernel filesystem blocks to ext3_fsblk_t,
and replace the printk format string respondingly.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some of the in-kernel ext3 block variable type are treated as signed 4 bytes
int type, thus limited ext3 filesystem to 8TB (4kblock size based).  While
trying to fix them, it seems quite confusing in the ext3 code where some
blocks are filesystem-wide blocks, some are group relative offsets that need
to be signed value (as -1 has special meaning).  So it seem saner to define
two types of physical blocks: one is filesystem wide blocks, another is
group-relative blocks.  The following patches clarify these two types of
blocks in the ext3 code, and fix the type bugs which limit current 32 bit ext3
filesystem limit to 8TB.

With this series of patches and the percpu counter data type changes in the mm
tree, we are able to extend exts filesystem limit to 16TB.

This work is also a pre-request for the recent >32 bit ext3 work, and makes
the kernel to able to address 48 bit ext3 block a lot easier: Simply redefine
ext3_fsblk_t from unsigned long to sector_t and redefine the format string for
ext3 filesystem block corresponding.

Two RFC with a series patches have been posted to ext2-devel list and have
been reviewed and discussed:
http://marc.theaimsgroup.com/?l=ext2-devel&m=114722190816690&w=2

http://marc.theaimsgroup.com/?l=ext2-devel&m=114784919525942&w=2

Patches are tested on both 32 bit machine and 64 bit machine, <8TB ext3 and
>8TB ext3 filesystem(with the latest to be released e2fsprogs-1.39).  Tests
includes overnight fsx, tiobench, dbench and fsstress.

This patch:

Defines ext3_fsblk_t and ext3_grpblk_t, and the printk format string for
filesystem wide blocks.

This patch classifies all block group relative blocks, and ext3_fsblk_t blocks
occurs in the same function where used to be confusing before.  Also include
kernel bug fixes for filesystem wide in-kernel block variables.  There are
some fileystem wide blocks are treated as int/unsigned int type in the kernel
currently, especially in ext3 block allocation and reservation code.  This
patch fixed those bugs by converting those variables to ext3_fsblk_t(unsigned
long) type.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This is a conversion to make the various file_operations structs in fs/
const.  Basically a regexp job, with a few manual fixups

The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change ext3_try_to_allocate() (called via ext3_new_blocks()) to try to
allocate the requested number of blocks on a best effort basis: After
allocated the first block, it will always attempt to allocate the next few(up
to the requested size and not beyond the reservation window) adjacent blocks
at the same time.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently ext3_get_block() only maps or allocates one block at a time.  This
is quite inefficient for sequential IO workload.

I have posted a early implements a simply multiple block map and allocation
with current ext3.  The basic idea is allocating the 1st block in the existing
way, and attempting to allocate the next adjacent blocks on a best effort
basis.  More description about the implementation could be found here:
http://marc.theaimsgroup.com/?l=ext2-devel&m=112162230003522&w=2

The following the latest version of the patch: break the original patch into 5
patches, re-worked some logicals, and fixed some bugs.  The break ups are:

 [patch 1] Adding map multiple blocks at a time in ext3_get_blocks()
 [patch 2] Extend ext3_get_blocks() to support multiple block allocation
 [patch 3] Implement multiple block allocation in ext3-try-to-allocate
 (called via ext3_new_block()).
 [patch 4] Proper accounting updates in ext3_new_blocks()
 [patch 5] Adjust reservation window size properly (by the given number
 of blocks to allocate) before block allocation to increase the
 possibility of allocating multiple blocks in a single call.

Tests done so far includes fsx,tiobench and dbench.  The following numbers
collected from Direct IO tests (1G file creation/read) shows the system time
have been greatly reduced (more than 50% on my 8 cpu system) with the patches.

 1G file DIO write:
 	2.6.15		2.6.15+patches
 real    0m31.275s	0m31.161s
 user    0m0.000s	0m0.000s
 sys     0m3.384s	0m0.564s

 1G file DIO read:
 	2.6.15		2.6.15+patches
 real    0m30.733s	0m30.624s
 user    0m0.000s	0m0.004s
 sys     0m0.748s	0m0.380s

Some previous test we did on buffered IO with using multiple blocks allocation
and delayed allocation shows noticeable improvement on throughput and system
time.

This patch:

Add support of mapping multiple blocks in one call.

This is useful for DIO reads and re-writes (where blocks are already
allocated), also is in line with Christoph's proposal of using getblocks() in
mpage_readpage() or mpage_readpages().
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Linus points out that ext3_readdir's readahead only cuts in when
ext3_readdir() is operating at the very start of the directory.  So for large
directories we end up performing no readahead at all and we suck.

So take it all out and use the core VM's page_cache_readahead().  This means
that ext3 directory reads will use all of readahead's dynamic sizing goop.

Note that we're using the directory's filp->f_ra to hold the readahead state,
but readahead is actually being performed against the underlying blockdev's
address_space.  Fortunately the readahead code is all set up to handle this.

Tested with printk.  It works.  I was struggling to find a real workload which
actually cared.

(The patch also exports page_cache_readahead() to GPL modules)

Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If /etc/mtab is a regular file all of the mount options (of a file system)
are written to /etc/mtab by the mount command.  The quota tools look there
for the quota strings for their operation.  If, however, /etc/mtab is a
symlink to /proc/mounts (a "good thing" in some environments) the tools
don't write anything - they assume the kernel will take care of things.

While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there is
no code to echo the quota strings into /proc/mounts and the quota tools
fail in the symlink case.

The attached patchs modify the EXT[2|3] and JFS codes to add the necessary
hooks.  The show_options function of each file system in these patches
currently deal with only those things that seemed related to quotas;
especially in the EXT3 case more can be done (later?).

Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:

 - FS codes have to process the entire string of options anyway.

 - Only FS codes that use quotas must have a show_options function (for
   quotas to work properly) however quotas are only used in a small number
   of FS.

 - Since most of the quota using FS support other options these FS codes
   should have the a show_options function to show those options - and the
   quota echoing becomes virtually negligible.

Based on feedback I have modified my patches from the original:

   JFS a missing patch has been restored to the posting
   EXT[2|3] and JFS always use the show_options function
       - Each FS has at least one FS specific option displayed
       - QUOTA output is under a CONFIG_QUOTA ifdef
       - a follow-on patch will add a multitude of options for each FS
   EXT[2|3] and JFS "quota" is treated as "usrquota"
   EXT3 journalled data check for journalled quota removed
   EXT[2|3] mount when quota specified but not compiled in

 - no changes from my original patch.  I tested the patch and the codes
   warn but

 - still mount.  With all due respection I believe the comments
   otherwise were a

 - misread of the patch.  Please reread/test and comment.  XFS patch
   removed - the XFS team already made the necessary changes EXT3 mixing
   old and new quotas are handled differently (not purely exclusive)

 - if old and new quotas for the same type are used together the old
   type is silently depricated for compatability (e.g.  usrquota and
   usrjquota)

 - mixing of old and new quotas is an error (e.g.  usrjquota and
   grpquota)
Signed-off-by: NMark Bellon <mbellon@mvista.com>
Acked-by: NDave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a problem with ext3 mount option parsing.  When remount of a filesystem
fails, old options are now restored.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use improved credits estimates for quota operations.  Also reserve a space
for a quota operation in a transaction only if filesystem was mounted with
some quota options.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!