- 30 3月, 2007 15 次提交
-
-
由 Ralf Baechle 提交于
Make smtc_setup_irq() update the list of interrupts which need to be watched by the debug code itself. Also there is no need to initialize the IPI swint when running with a single VPE, so don't initialize it. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Check the IEP bit for R3000 style processors when checking to see if interrupts will be reenabled in restore_all. Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
So until MIPS_MT_SMTC_INSTANT_REPLAY has been rewritten to solve this issue, don't allow selecting it with PREEMPT. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
arch/mips/pci/pci-ev64120.c:10: warning: implicit declaration of function 'allocate_irqno' Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Remove unused variable. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: NetXen: Fix hardware access for ppc architecture. sis190: new PHY support atl1: save mac address on remove
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IFB]: Fix crash on input device removal [BNX2]: Fix link interrupt problem.
-
由 Timur Tabi 提交于
The definition of struct ucc_slow puts the guemr register immediately after the utpt register, when it should be at offset 0x90. This patch adds the missing 0x52-byte padding. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Chuck Meade 提交于
Correct the alignment of the internal buffer used by the QUICC Engine SDMA controller to 4Kbytes. Correct the shift direction in the logic that sets up the SDMR register for the QUICC Engine SDMA controller. Signed-off-by: NChuck Meade <chuckmeade@mindspring.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Patrick McHardy 提交于
The input_device pointer is not refcounted, which means the device may disappear while packets are queued, causing a crash when ifb passes packets with a stale skb->dev pointer to netif_rx(). Fix by storing the interface index instead and do a lookup where neccessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxim Levitsky 提交于
This adds support of suspend/resume on i386 for HPET, which fixes a number of timer-related failures around STR. Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Acked-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by: NJeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 3月, 2007 25 次提交
-
-
git://git.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: partial write fix
-
由 Carsten Otte 提交于
Fix the bug, that reading into xip mapping from /dev/zero fills the user page table with ZERO_PAGE() entries. Later on, xip cannot tell which pages have been ZERO_PAGE() filled by access to a sparse mapping, and which ones origin from /dev/zero. It will unmap ZERO_PAGE from all mappings when filling the sparse hole with data. xip does now use its own zeroed page for its sparse mappings. Please apply. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
sys_madvise has down_write of mmap_sem, then madvise_remove calls vmtruncate_range which takes i_mutex and i_alloc_sem: no, we can easily devise deadlocks from that ordering. madvise_remove drop mmap_sem while calling vmtruncate_range: luckily, since madvise_remove doesn't split or merge vmas, it's easy to handle this case with a NULL prev, without restructuring sys_madvise. (Though sad to retake mmap_sem when it's unlikely to be needed, and certainly down_read is sufficient for MADV_REMOVE, unlike the other madvices.) Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
shmem_truncate_range has its own truncate_inode_pages_range, to free any pages racily instantiated while it was in progress: a SHMEM_PAGEIN flag is set when this might have happened. But holepunching gets no chance to clear that flag at the start of vmtruncate_range, so it's always set (unless a truncate came just before), so holepunch almost always does this second truncate_inode_pages_range. shmem holepunch has unlikely swap<->file races hereabouts whatever we do (without a fuller rework than is fit for this release): I was going to skip the second truncate in the punch_hole case, but Miklos points out that would make holepunch correctness more vulnerable to swapoff. So keep the second truncate, but follow it by an unmap_mapping_range to eliminate the disconnected pages (freed from pagecache while still mapped in userspace) that it might have left behind. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Miklos Szeredi observes that during truncation of shmem page directories, info->lock is released to improve latency (after lowering i_size and next_index to exclude races); but this is quite wrong for holepunching, which receives no such protection from i_size or next_index, and is left vulnerable to races with shmem_unuse, shmem_getpage and shmem_writepage. Hold info->lock throughout when holepunching? No, any user could prevent rescheduling for far too long. Instead take info->lock just when needed: in shmem_free_swp when removing the swap entries, and whenever removing a directory page from the level above. But so long as we remove before scanning, we can safely skip taking the lock at the lower levels, except at misaligned start and end of the hole. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Miklos Szeredi observes BUG_ON(!entry) in shmem_writepage() triggered in rare circumstances, because shmem_truncate_range() erroneously removes partially truncated directory pages at the end of the range: later reclaim on pages pointing to these removed directories triggers the BUG. Indeed, and it can also cause data loss beyond the hole. Fix this as in the patch proposed by Miklos, but distinguish between "limit" (how far we need to search: ignore truncation's next_index optimization in the holepunch case - if there are races it's more consistent to act on the whole range specified) and "upper_limit" (how far we can free directory pages: generally we must be careful to keep partially punched pages, but can relax at end of file - i_size being held stable by i_mutex). Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cs> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Mark some static arrays as const that aren't and shouldn't be modified, and remove incorrect static attribute from some variables. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
* rename name to host_root_path * rename data to req_root. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Fix a few miscellaneous compilation problems - an assignment with mismatched types in ldt.c a missing include in mconsole.h which needs a definition of uml_pt_regs I missed removing an include of user_util.h in hostfs Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Lunz 提交于
Permit lvm to create logical volumes without crashing UML. When device-mapper's DM_DEV_CREATE_CMD ioctl is called to create a new device, dev_create()->dm_create()->alloc_dev()-> blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY) is called. blk_queue_bounce_limit(BLK_BOUNCE_ANY) calls init_emergency_isa_pool() if blk_max_pfn < blk_max_low_pfn. This is the case on UML, but init_emergency_isa_pool() hits BUG_ON(!isa_page_pool) because there doesn't seem to be a dma zone on UML for mempool_create() to allocate from. Most architectures seem to have max_low_pfn == max_pfn, but UML doesn't because of the uml_reserved chunk it keeps for itself. From what I can see, max_pfn and max_low_pfn don't get much use after the bootmem-allocator stops being used anyway, except that they initialize the block layer's blk_max_low_pfn/blk_max_pfn. This ensures init_emergency_isa_pool() doesn't crash uml in this situation by setting max_low_pfn == max_pfn in mem_init(). Signed-off-by: NJason Lunz <lunz@falooley.org> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
As the comment immediately preceding this points out, this list is changed in irq context, so it needs to be protected with spin_lock_irqsave in process context when it is processed. Sometimes, gcc should just compile the comments and forget the code. The IRQ side of this was better, in the sense that it blocked and unblocked interrupts, but it still should have saved and restored them. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
_PAGE_PROTNONE conflicts with the lowest bit of pgoff. This causes all sorts of weirdness when nonlinear mappings are used. Took me a good half day to track this down. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Acked-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Fix a NULL dereference when unplugging a device. The default value of err_msg wants to be "" in case the driver doesn't modify it. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Commit 62f96cb0 introduced per-devices queues and locks, which was fine as far as it went, but left in place a global which controlled access to submitting requests to the host. This should have been made per-device as well, since it causes I/O hangs when multiple block devices are in use. This patch fixes that by replacing the global with an activity flag in the device structure in order to tell whether the queue is currently being run. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
I have a bugreport that scrollwheel of bluetooth version of apple mightymouse doesn't work. The USB version of mightymouse works, as there is a quirk for handling scrollwheel in hid/usbhid for it. Now that bluetooth git tree is hooked to generic hid layer, it could easily use the quirks which are already present in generic hid parser, hid-input, etc. Below is a simple patch against bluetooth git tree, which adds quirk handling to current bluetooth hidp code, and sets quirk flags for device 0x05ac/0x030c, which is the bluetooth version of the apple mightymouse. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Salyzyn, Mark 提交于
The IPS and DPT_I2O drivers are missing, so here is my 'hand coded' addition to deal with overlap to the patch below (apply both). I selected Maintained rather than supported for the ips and dpt_i2o driver due to their legacy nature. Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
In commit 0475ac08 when converting the orphaned process group handling to use struct pid I made a small mistake. I accidentally replaced an == with a !=. Besides just being a dumb thing to do apparently this has a bad side effect. The improper orphaned process group detection causes kwin to die after a suspend/resume cycle. I'm amazed this patch has been around as long as it has without anyone else noticing something funny going on. And the following people deserve credit for spotting and helping to reproduce this. Thanks to: Sid Boyce <g3vbv@blueyonder.co.uk> Thanks to: "Michael Wu" Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yinghai.lu@amd.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitriy Monakhov 提交于
Currently if partial write has happened while ->commit_write() then page wasn't marked as accessed and rebalanced. Signed-off-by: NMonakhov Dmitriy <dmonakhov@openvz.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
NetXen: Fix for hardware access on big endian machine. Signed-off-by: NAdhiraj Joshi <adhiraj@netxen.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
Reported to work on the WinFast 761GXK8MB-RS motherboard. Plain 10/100 Mbps. Signed-off-by: NPaul Gibbons <paul@pkami.e7even.com> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Chris Snook 提交于
Some atl1 boards get their MAC address written directly to the register by the BIOS during POST, rather than storing it in EEPROM that's accessible to the driver. If the MAC register on one of these boards is changed and then the module is unloaded, the permanent MAC address will be forgotten until the box is rebooted. We should save the permanent address during removal if we've been messing with it. Signed-off-by: NChris Snook <csnook@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Chan 提交于
bnx2_has_work()'s logic is flawed and can cause the driver to miss a link event. The fix is to compare the status block's attn_bits and attn_bits_ack to determine if there is a link event. Update version to 1.5.6. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean-Christophe Dubois 提交于
Fix a bug in dcr_unmap(). At unmap time the DCR offset need to be added instead of substracted. Signed-off-by: NJean-Christophe Dubois <jdubois@mc.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-