- 08 2月, 2008 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 06 2月, 2008 2 次提交
-
-
由 Carlos Corbacho 提交于
This is based on the 2004 out-of-tree work of Jamey Hicks, to add support via WMI for controlling the jog dial and wireless on these tablets. v1: Original release v2: As per Joshua Wise's comments, change bluetooth to jogdial (an error from the original driver). Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> CC: Matthew Garrett <mjg59@srcf.ucam.org> CC: Jamey Hicks <jamey.hicks@nokia.com> CC: Joshua Wise <joshua@joshuawise.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Carlos Corbacho 提交于
This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. v1: * Initial release v2: * Replace left over ACPI references with WMI * Add GUID based autoloading (depends on future work to WMI) * Add DMI based autoloading (backup solution until WMI sysfs/ class work is available) * Checkpatch fixes v3: * Add new EC quirks for Aspire 3100 & 5100, and Extensa 5220 v4: * Simplified internal handling of WMID and AMW0 devices * Add autodetection for bluetooth and maximum brightness on AMW0 V2 and WMID laptops. v5: * Add EC quirk for Medion MD 98000 * Add autodetection for AMW0, and mail LED on AMW0 and AMW0 V2. * Improve error handling * Fix AMW0 V2 bluetooth and wireless, by using both WMID and AMW0 methods to ensure that the correct value is always set. v6: * Fix 'use before initialisation' bug with quirks. v7 * Fix bug on AMW0 where acer-wmi would exit if a mail LED was not detected. * Add Acer Aspire 9110 mail LED support * Fix section mismatch warnings Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> CC: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 02 2月, 2008 2 次提交
-
-
由 Thomas Sujith 提交于
Intel menlow platform specific driver for thermal management extension. Signed-off-by: NThomas Sujith <sujith.thomas@intel.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Older ThinkPad models do not export some of the hot keys over the event-based ACPI hot key interface. For these models, one has to poll the CMOS NVRAM to check the key state at a rate faster than the expected rate at which the user might repeatedly press the same hot key. This patch implements this functionality for many of the hotkeys in a transparent way: hot keys will now Just Work, and the driver knows the best approach (events or NVRAM polling) to employ, based on the HKEY.MHKA ACPI method. Also, the driver can turn off the polling when there are no users for the hot keys that need such polling. The NVRAM-based hot keys of the A3x series that have never been implemented by later models are not supported, to avoid changes in the keymap of the input devices that could cause headaches in the future. There is a Kconfig option to avoid compiling the NVRAM polling code, as it is not very small, and unlikely to be useful on any ThinkPad newer than a T40, X31 or R52. This feature is based on a previous effort by Richard Hughes. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 10月, 2007 1 次提交
-
-
由 Matt LaPlante 提交于
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Hans-Christian Egtvedt 提交于
The Synchronous Serial Controller (SSC) on Atmel microprocessors are capable of tranceiving many frame based protocols, like I2S. Tested on the AT32AP7000/ATSTK1000. This driver is used in the ALSA sound driver for the AT73C213 external DAC on the ATSTK1000 development board for AVR32. This sound driver will be submitted soon. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 [akpm@linux-foundation.org: init spinlock at compile time] Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 9月, 2007 1 次提交
-
-
由 Andreas Herrmann 提交于
Build errors if CONFIG_SONY_LAPTOP && !INPUT or if CONFIG_THINKPAD_ACPI && !INPUT: LD vmlinux ... drivers/built-in.o: In function `sony_laptop_remove_input': sony-laptop.c:(.text+0x768fb): undefined reference to `input_unregister_device' ... drivers/built-in.o: In function `thinkpad_acpi_module_exit': thinkpad_acpi.c:(.text+0x78c1b): undefined reference to `input_free_device' ... Signed-off-by: NAndreas Herrmann <aherrman@arcor.de> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 17 9月, 2007 1 次提交
-
-
Revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED Kconfig option because it would create a legacy we don't want to support. CONFIG_THINKPAD_ACPI_INPUT_ENABLED was added to try to fix an issue that is now moot with the addition of the netlink ACPI event report interface to the ACPI core. Now that ACPI core can send events over netlink, we can use a different strategy to keep backwards compatibility with older userspace, without the need for the CONFIG_THINKPAD_ACPI_INPUT_ENABLED games. And it arrived before CONFIG_THINKPAD_ACPI_INPUT_ENABLED made it to a stable mainline kernel, even, which is Good. This patch is in sync with some changes to thinkpad-acpi backports, that will keep things sane for userspace across different combinations of kernel versions, thinkpad-acpi backports (or the lack thereof), and userspace capabilities: Unless a module parameter is used, thinkpad-acpi will now behave in such a way that it will work well (by default) with userspace that still uses only the old ACPI procfs event interface and doesn't care for thinkpad-acpi input devices. It will also always work well with userspace that has been updated to use both the thinkpad-acpi input devices, and ACPI core netlink event interface, regardless of any module parameter. The module parameter was added to allow thinkpad-acpi to work with userspace that has been partially updated to use thinkpad-acpi input devices, but not the new ACPI core netlink event interface. To use this mode of hot key reporting, one has to specify the hotkey_report_mode=2 module parameter. The thinkpad-acpi driver exports the value of hotkey_report_mode through sysfs, as well. thinkpad-acpi backports to older kernels, that do not support the new ACPI core netlink interface, have code to allow userspace to switch hotkey_report_mode at runtime through sysfs. This capability will not be provided in mainline thinkpad-acpi as it is not needed there. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Hugh Dickins <hugh@veritas.com> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 29 8月, 2007 1 次提交
-
-
由 Jonathan Woithe 提交于
Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 19 8月, 2007 1 次提交
-
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 8月, 2007 1 次提交
-
-
The current kconfig help text was misleading users. Also, the default for an input-layer-optimized support caused way too many problems without up-to-date userspace in place. So, rework the help text, and change the default to N. Note that distributions are supposed to enable this option as soon as they update HAL to a version that handles the thinkpad-acpi new input layer interface. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 22 7月, 2007 2 次提交
-
-
It appears that Lenovo decided to break the EC brightness control interface in a weird way in their latest BIOSes. Fortunately, the old CMOS NVRAM interface works just fine in such BIOSes. Add a module parameter that allows the user to select which strategy to use for brightness control: EC, NVRAM, or both. By default, do both (which is the way thinkpad-acpi used to work until now) on IBM ThinkPads, and use NVRAM only on Lenovo ThinkPads. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Make the input layer the default way to deal with thinkpad-acpi hot keys, but add a kernel config option to retain the old way of doing things. This means we map a lot more keys to useful stuff by default, and also that we enable hot key handling by default on driver load (like Windows does). The documentation for proper use of this resource is also updated. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 18 7月, 2007 1 次提交
-
-
由 Dmitry Torokhov 提交于
IBMASM: must depend on CONFIG_INPUT The driver registers couple of input devices and therefore must depend on CONFIG_INPUT. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Vernon Mauery <vernux@us.ibm.com> Cc: Max Asbock <masbock@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2007 2 次提交
-
-
由 Randy Dunlap 提交于
This config symbol name is confusing and unneeded/unwanted, so just change it to MISC_DEVICES. * * Misc devices * Misc devices (MISC_STRANGE_DEV) [Y/n] (NEW) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 7月, 2007 1 次提交
-
-
由 Ivo van Doorn 提交于
This patch adds a library for reading from 93cx6 eeproms. Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 7月, 2007 1 次提交
-
-
由 Linus Torvalds 提交于
Yeah, we could have just disabled it, but there's work on a new one that isn't as fundamentally broken, so there really doesn't seem to be any point in keeping it around. The recent timer cleanup broke the only valid use, and when I say "valid", I obviously mean "totally broken". So it's not like it works, or really even can work in the current format that uses the unsafe "panic" LED blinking routines.. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 5月, 2007 1 次提交
-
-
由 Mattia Dongili 提交于
Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 5月, 2007 2 次提交
-
-
由 Jiri Slaby 提交于
Add sensable phantom driver Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Simple driver that blinks the keyboard LEDs when loaded. Useful for checking that the kernel is still alive or for crashdumping Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2007 1 次提交
-
-
Register thinkpad-acpi platform driver and platform device for the device model. Also register the platform device with the hwmon class. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 22 4月, 2007 1 次提交
-
-
Add a debug mode parameter and verbose debug mode Kconfig option. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 11 4月, 2007 2 次提交
-
-
由 malattia@linux.it 提交于
Compatibility code to allow old sonypi bound userspace apps to still work. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 malattia@linux.it 提交于
Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 31 3月, 2007 1 次提交
-
-
Since ibm-acpi was renamed to thinkpad-acpi, rename and update its Kconfig entries and Kconfig-related symbols accordingly. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 26 3月, 2007 1 次提交
-
-
ibm-acpi is not an ACPICA driver, so move it to drivers/misc as per Len Brown's request. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 2月, 2007 3 次提交
-
-
由 Mattia Dongili 提交于
Update documentation to be consistent with current implementation (backlight subsys and platform_device). Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Mattia Dongili 提交于
Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Mattia Dongili 提交于
Move drivers/acpi/sony_acpi.c to drivers/misc/sony-laptop.c with all the necessary configuration. The SONY_LAPTOP config option substitutes the old ACPI_SONY and is 'default n' now. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 10 2月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2007 3 次提交
-
-
由 Corentin Chary 提交于
Adds backlight support using backlight class. We now change the brightness *and toggle the backlight !* via /sys/class/backlight/asus-laptop/. If the user switchs the backlight using the keyboard, asus_hotk_notify looks for ATKD_LCD_OFF and ATKD_LCD_ON events, and stores the right state into hotk->status and bd->props->power . Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Corentin Chary 提交于
Add led support, using generic led class. Thomas Tuttle's patch <http://lkml.org/lkml/2006/7/6/247> was very usefull. We use hotk->status to store led status because it's very hard to find acpi method to get the right status... To reduce the code, I use a lot of macro (ASUS_LED, ASUS_LED_REGISTER, etc ...), because the code is the same for all leds ... Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Corentin Chary 提交于
Adds the new driver and make ASUS_LAPTOP and ACPI_ASUS incompatible. It may be strange to use ASUS_CREATE_DEVICE_ATTR and ASUS_SET_DEVICE_ATTR now, but these macro will be very usefull in next patchs. ASUS_HANDLE and ASUS_HANDLE_INIT comes from IBM_HANDLE and IBM_HANDLE_INIT, with some modification, and will also be used in next patchs. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 25 10月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 10月, 2006 1 次提交
-
-
由 Brent Casavant 提交于
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on Altix XE (x86_64) platforms in the near future. As such it is now a misnomer for the IOC4 base device driver to live under drivers/sn, and would complicate builds for non-SN2. This patch moves the IOC4 base driver code from drivers/sn to drivers/misc, and updates the associated Makefiles and Kconfig files to allow building on non-SN2 configs. Due to the resulting change in link order, it is now necessary to use late_initcall() for IOC4 subdriver initialization. [akpm@osdl.org: __udivdi3 fix] [akpm@osdl.org: fix default in Kconfig] Acked-by: NPat Gefre <pfg@sgi.com> Acked-by: NJeremy Higdon <jeremy@sgi.com> Signed-off-by: NBrent Casavant <bcasavan@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 10月, 2006 1 次提交
-
-
由 Lennart Poettering 提交于
Create a driver to support the platform-specific features of MSI S270 laptops (and maybe other MSI laptops). This driver implements a backlight device for controlling LCD brightness (/sys/class/backlight/msi-laptop-bl/). In addition it allows access to the WLAN and Bluetooth states through a platform driver (/sys/devices/platform/msi-laptop-pf/). Signed-off-by: NLennart Poettering <mzxreary@0pointer.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 04 10月, 2006 1 次提交
-
-
由 Alex Dubov 提交于
Signed-off-by: NAlex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: NPierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 9月, 2005 1 次提交
-
-
由 Max Asbock 提交于
Signed-off-by: NMax Asbock <masbock@us.ibm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-