Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit c6cc1ca7 ("flowi: Abstract out functions to get flow hash
based on flowi") introduced a bug in __skb_set_sw_hash where we
require a dependency on evaluating arguments in a function in order.
There is no such ordering enforced in C, so this incorrect. This
patch fixes that by splitting out the arguments. This bug was
found via a compiler warning that keys may be uninitialized.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-09-01

This series contains updates to i40e, ixgbe and ixgbevf.

Anjali fixes a bug in i40e where the port is not receiving multicast or VLAN
tagged packets in promiscuous mode.  Which can occur when a software bridge
is created on top of the device.

Don adds support in ixgbe that indicates the presence of management firmware.
Added support for entering low power link up state on devices that support
it when the device is closing or suspending.  Updated the driver to report
unknown bus speed and width since IOSF does not report a PCIe bus speed or
width for X550 devices.  Also added the new bus type for integrated I/O
interface (IOSF).  Cleaned up of redundant code in ixgbe.

Mark adds support for UDP-encapsulation transmit checksum and for VXLAN
receive offloads.  Introduces a helper function to do the register access
and processing to avoid needless PHY access on copper PHYs.  Added support
for reporting 2.5G link speed.  Fixed warnings resulting from redundant
initializations of the get_bus_info field.

Maninder Singh updates the ixgbe driver to use kzalloc instead of kcalloc
for allocation of one thing.

Tom Barbette adds support for ethtool to change the rxfh indirection table
and/or key using ethtool interface.

Emil resolves an issue where users were not able to dynamically set number
of queues for 82598 via ethtool -L.

Alex Williamson removes bimodal SR-IOV disabling behavior since it is
confusing to users and results in a state where the PF is broken for other
uses unless the user sets sriov_numvfs to zero prior to unbinding the
device.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resolve warnings resulting from redundant initialization of the
get_bus_info field in the mac_ops_X550* structures.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When unbinding an SR-IOV device with VFs configured from ixgbe, the
driver behaves in one of two ways.  If max_vfs was specified, the
SR-IOV state is disabled, removing the VFs.  The occurs regardless of
whether the VF count was later modified through sysfs.  If however
max_vfs is zero, such as by not specifying the module parameter, the
VFs persist after the PF is unbound from ixgbe.  If the PF is then
bound to vfio-pci to be assigned to a VM, the PF is non-functional.

>From the comment, commit da36b647 ("ixgbe: Implement PCI SR-IOV
sysfs callback operation") clearly intended this alternate behavior,
but probably didn't realize the PF doesn't work in this mode.

This bimodal behavior is confusing to users and results in a state
where the PF is broken for other uses unless the user sets
sriov_numvfs to zero prior to unbinding the device.  Remove this
behavior so that VFs are removed and the PF is functional for other
uses after unbind, regardless of the way VFs are enabled.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that we can do 2.5G link speed, we need to be able to report it.
Also change the nested triadic involved in creating the log message
to instead use a simpler switch statement to set a string pointer.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch resolves an issue where users were not able to dynamically
set number of queues for 82598 via ethtool -L
Reported-by: NTal Abudi <talabudi@gmail.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Allows to change the rxfh indirection table and/or key using
ethtool interface.
Signed-off-by: NTom Barbette <tom.barbette@ulg.ac.be>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Avoid a needless PHY access on copper phys to save the 10ms wait
time for each PHY access. A helper function is introduced to
actually do the register access and process the contents.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We already cache this FW/SW semaphore mask so might as well use it
for consistency.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch removes the redundant lan_id in the phy struct and uses
the bus version.  Both variables exist and intend to represent the
STATUS register LAN_ID field.  However, phy.lan_id is not bit shifted
so the phy.lan_id = 0x0 for LAN Id 0 and phy.lan_id = 0x4 for LAN Id 1.
Where bus.lan_id is bit shifted so bus.lan_id = 0x0 for LAN Id 0 and
bus.lan_id = 0x1 for LAN Id 1. There seems no need for the additional
lan_id variable and this should make the code less confusing.
Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Use kzalloc rather than kcalloc(1..

The semantic patch that makes this change is as follows:

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>

and removing checkpatch below CHECK:
CHECK: Prefer kzalloc(sizeof(*fwd_adapter)...) over
kzalloc(sizeof(struct ixgbe_fwd_adapter)...)
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Reviewed-by: NVaneet Narang <v.narang@samsung.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

These cannot live in net/core/flow.c which only builds when XFRM is
enabled.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ixgbe never has as very doubtfully ever will support either
PCI or PCI-X devices.  So remove the unused types from the
ixgbe_bus_type.  Thanks to Alex Duyck for suggesting this.
Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

With this patch we add support for a new bus type ixgbe_bus_type_internal.
X550em devices use IOSF and not PCIe bus so this new type is to accommodate
them.
Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Added ixgbe_get_bus_info_X550em to X550 code. ixgbe_get_bus_info_X550em
sets bus.width to ixgbe_bus_width_unknown and bus.speed to
ixgbe_bus_speed_unknown, because IOSF does not report a PCIe bus
width or speed.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When the device is closing or suspending, call ixgbe_enter_lplu to
enter low power link up state on devices that support it. When this
is done, prevent the phy from being reset in the ixgbe_down path
so that link is present when calling ixgbe_enter_lplu.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add support for VXLAN RX offloads for the X55x devices that support
them.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

By using GSO for UDP-encapsulated packets, all ixgbe devices can
be directed to generate checksums for the inner headers because
the outer UDP checksum can be zero. So point the machinery at the
inner headers and have the hardware generate the checksum.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Just have a flags member instead.

   In file included from include/linux/linkage.h:4:0,
                    from include/linux/kernel.h:6,
                    from net/core/flow_dissector.c:1:
   In function 'flow_keys_hash_start',
       inlined from 'flow_hash_from_keys' at net/core/flow_dissector.c:553:34:
>> include/linux/compiler.h:447:38: error: call to '__compiletime_assert_459' declared with attribute error: BUILD_BUG_ON failed: FLOW_KEYS_HASH_OFFSET % sizeof(u32)
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wait up to about 100 us for FDIRCMD writes to complete and return
failure indications.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

There are various reasons why this method may or may not need to be
defined and some of these we don't know until runtime.  So we will
set the value in get_invariants.
Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a support function that will indicate for the
existence of management FW.
Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This fixes bugs where the port is not receiving multicast or VLAN tagged
packets when in promiscuous mode. This can occur when a SW bridge is
created on top of the device.

This also fixes issues where the promiscuous behavior setting was not
being preserved across a reset caused by features being enabled or
disabled.

We are using defport instead of doing a true promiscuous mode because we do
not need to receive the SRIOV or VMDq VSI directed traffic which would suck
up bandwidth and is really not intended for the SW bridge.

In addition, with defport we get VLAN promiscuous behavior which is not
possible from the VSI level promiscuous setting.

Change-ID: Ie21985eac32d5af1c02e9d71c6430a90d5bab40f
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Tom Herbert says:

====================
flow_dissector: Paramterize dissection and other features

This patch set adds some new capabilities to flow_dissector:

- Add flags to flow dissector functions to control dissection
  - Flag to stop dissection when L3 header is seen (don't
    dissect L4)
  - Flag to stop dissection when encapsulation is detected
  - Flag to parse first fragment of fragmented packet. This
    may provide L4 ports
- Added new reporting in key_control
  - Packet is a fragment
  - Packet is a first fragment
  - Packet has encapsulation

Also:
  - Make __skb_set_sw_hash a general function
  - Create functions to get a flow hash based on flowi4 or flowi6
    structures without an reference to an skbuff
  - Ignore flow dissector return value from ___skb_get_hash. Just
    use whatever key fields are found to make a hash

Tested:

Ran 200 netperf TCP_RR instances for IPv6 and IPv4. Did not see any
regression. Ran UDP_RR with 10000 byte request and response size
for IPv4 and IPv6, no regression observed however I did see better
performance with IPv6 flow labels due to use of flow labels for L4
hash.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ___skb_get_hash ignore return value from skb_flow_dissect_flow_keys.
A failure in that function likely means that there was a parse error,
so we may as well use whatever fields were found before the error was
hit.  This is also good because it means we won't keep trying to derive
the hash on subsequent calls to skb_get_hash for the same packet.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an input flag to flow dissector on rather dissection should stop
when encapsulation is detected (IP/IP or GRE). Also, add a key_control
flag that indicates encapsulation was encountered during the
dissection.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an input flag to flow dissector on rather dissection should be
stopped when a flow label is encountered. Presumably, the flow label
is derived from a sufficient hash of an inner transport packet so
further dissection is not needed (that is ports are not included in
the flow hash). Using the flow label instead of ports has the additional
benefit that packet fragments should hash to same value as non-fragments
for a flow (assuming that the same flow label is used).

We set this flag by default in for skb_get_hash.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an input flag to flow dissector on rather dissection should be
stopped when an L3 packet is encountered. This would be useful if a
caller just wanted to get IP addresses of the outermost header (e.g.
to do an L3 hash).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Parse NEXTHDR_FRAGMENT. When seen account for it in the fragment bits of
key_control. Also, check if first fragment should be parsed.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an input flag to flow dissector on rather dissection should be
attempted on a first fragment. Also add key_control flags to indicate
that a packet is a fragment or first fragment.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The flags argument will allow control of the dissection process (for
instance whether to parse beyond L3).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of returning immediately (on a parsing failure for instance) we
jump to cleanup code. This always sets protocol values in key_control
(even on a failure there is still valid information in the key_tags that
was set before the problem was hit).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create __get_hash_from_flowi6 and __get_hash_from_flowi4 to get the
flow keys and hash based on flowi structures. These are called by
__skb_get_hash_flowi6 and __skb_get_hash_flowi4. Also, created
get_hash_from_flowi6 and get_hash_from_flowi4 which can be called
when just the hash value for a flowi is needed.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move __skb_set_sw_hash to skbuff.h and add __skb_set_hash which is
a common method (between __skb_set_sw_hash and skb_set_hash) to set
the hash in an skbuff.

Also, move skb_clear_hash to be closer to __skb_set_hash.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the flow dissector functions that are specific to skbuffs into
skbuff.h out of flow_dissector.h. This makes flow_dissector.h have
no dependencies on skbuff.h.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The temperature registers appear to report values in degrees Celsius
while the hwmon API mandates values to be exposed in millidegrees
Celsius. Do the conversion so that the values reported by "sensors"
are correct.

Fixes: aed93e0b ("tg3: Add hwmon support for temperature")
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: stable@vger.kernel.org [v3.6+]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 8b63ec18 ("phylib: Make PHYs children of their MDIO bus, not
the bus' parent.") uncovered a problem in mdiobus_unregister() which
leads to this warning when I reboot an APM Mustang (arm64) platform:

  WARNING: CPU: 7 PID: 4239 at fs/sysfs/group.c:224 sysfs_remove_group+0xa0/0xa4()
  sysfs group fffffe0000e07a10 not found for kobject 'xgene-mii-eth0:03'
  ...
  CPU: 7 PID: 4239 Comm: reboot Tainted: G            E   4.2.0-0.18.el7.test15.aarch64 #1
  Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Aug 26 2015
  Call Trace:
  [<fffffe000009739c>] dump_backtrace+0x0/0x170
  [<fffffe000009752c>] show_stack+0x20/0x2c
  [<fffffe00007436f0>] dump_stack+0x78/0x9c
  [<fffffe00000c2cb4>] warn_slowpath_common+0xa0/0xd8
  [<fffffe00000c2d60>] warn_slowpath_fmt+0x74/0x88
  [<fffffe0000293d3c>] sysfs_remove_group+0x9c/0xa4
  [<fffffe00004a8bac>] dpm_sysfs_remove+0x5c/0x70
  [<fffffe000049b388>] device_del+0x44/0x208
  [<fffffe000049b578>] device_unregister+0x2c/0x7c
  [<fffffe000050dc68>] mdiobus_unregister+0x48/0x94
  [<fffffe000052afd0>] xgene_enet_mdio_remove+0x28/0x44
  [<fffffe000052d3f0>] xgene_enet_remove+0xd0/0xd8
  [<fffffe000052d424>] xgene_enet_shutdown+0x2c/0x3c
  [<fffffe00004a204c>] platform_drv_shutdown+0x24/0x40
  [<fffffe000049d4f4>] device_shutdown+0xf0/0x1b4
  [<fffffe00000e31ec>] kernel_restart_prepare+0x40/0x4c
  [<fffffe00000e32f8>] kernel_restart+0x1c/0x80
  [<fffffe00000e3670>] SyS_reboot+0x17c/0x250

The problem is that mdiobus_unregister() deletes the bus device before
unregistering the phy devices on the bus. This wasn't a problem before
because the phys were not children of the bus:

  /sys/devices/platform/APMC0D05:00/net/eth0/xgene-mii-eth0:03
  /sys/devices/platform/APMC0D05:00/net/eth0/xgene-mii-eth0

But now that they are:

  /sys/devices/platform/APMC0D05:00/net/eth0/xgene-mii-eth0/xgene-mii-eth0:03

when mdiobus_unregister deletes the bus device, the phy subdirs are
removed from sysfs also. So when the phys are unregistered afterward,
we get the warning. This patch changes the order so that phys are
unregistered before the bus device is deleted.

Fixes: 8b63ec18 ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.")
Signed-off-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NMark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of VRF patches used 'int' for table id. It should be u32 to be
consistent with the rest of the stack.

Fixes:
4e3c8992 ("net: Introduce VRF related flags and helpers")
15be405e ("net: Add inet_addr lookup by table")
30bbaa19 ("net: Fix up inet_addr_type checks")
021dd3b8 ("net: Add routes to the table associated with the device")
dc028da5 ("inet: Move VRF table lookup to inlined function")
f6d3c192 ("net: FIB tracepoints")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

opts_size is only written and never read. Following patch
removes this unused variable.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>