Remove usbhost_sar_fclk from the OMAP3 clock framework.  The bit that
the clock was tweaking doesn't actually enable or disable a clock; it
controls whether the hardware will save and restore USBHOST state
when the powerdomain changes state.  (That happens to coincidentally
enable a clock for the duration of the operation, hence the earlier
confusion.)

In place of the clock, mark the USBHOST powerdomain as supporting
hardware save-and-restore functionality.

linux-omap source commit is f3ceac86a9d425d101d606d87a5af44afef27179.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds a missing OMAP24xx clock, the SSI L4 interface clock,
as "ssi_l4_ick".

linux-omap source commit is ace129d39b3107d330d4cf6934385d13521f2fec.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix sparse & checkpatch warnings in OMAP2/3 PRCM & PM code.  This mostly
consists of:

- converting pointer comparisons to integers in form similar to
  (ptr == 0) to the standard idiom (!ptr)

- labeling a few non-static private functions as static

- adding prototypes for *_init() functions in the appropriate header
  files, and getting rid of the corresponding open-coded extern
  prototypes in other C files

- renaming the variable 'sclk' in mach-omap2/clock.c:omap2_get_apll_clkin
  to avoid shadowing an earlier declaration

Clean up checkpatch issues.  This mostly involves:

- converting some asm/ includes to linux/ includes

- cleaning up some whitespace

- getting rid of braces for conditionals with single following statements

Also take care of a few odds and ends, including:

- getting rid of unlikely() and likely() - none of this code is particularly
  fast-path code, so the performance impact seems slim; and some of those
  likely() and unlikely() indicators are probably not as accurate as the
  ARM's branch predictor

- removing some superfluous casts

linux-omap source commit is 347df59f5d20fdf905afbc26b1328b0e28a8a01b.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add non-CORE DPLL rate set code and M,N programming for OMAP3.
Connect it to OMAP34xx DPLLs 1, 2, 4, 5 via the clock framework.

You may see some warnings on rate sets from the freqsel code.  The
table that TI presented in the 3430 TRM Rev F does not cover Fint <
750000, which definitely occurs in practice.  However, the lack of this
freqsel case does not appear to impair the DPLL rate change.

linux-omap source commit is 689fe67c6d1ad8f52f7f7b139a3274b79bf3e784.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... rather than the clock names themselves.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... which now means no driver requests the "armxor_ck" clock directly.
Also, fix the error handling for clk_get(), ensuring that we propagate
the error returned from clk_get().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

By providing a dummy ick for OMAP1510 and OMAP310, we avoid having
SoC conditional clock information in i2c-omap.c.  Also, fix the
error handling by making sure we propagate the error returned via
clk_get().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On OMAP1, the I2C functional clock (fck) is the armxor_ck, so there's
no need to get "armxor_ck" separately.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than introducing a special 'mcbsp_clk' with code behind it in
mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp
driver to be like any other driver.  mcbsp requests its fck and ick
clocks directly, and the SoC specific code deals with selecting the
correct clock.

There is one oddity to deal with - OMAP1 fiddles with the DSP clocks
and DSP reset, so we move this to the two callback functions.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... rather than the clock names themselves.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Eliminate the OMAP1 vs OMAP2 clock knowledge in the MMC driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert OMAP MMC driver to match clocks using the device ID and a
connection ID rather than a clock name.  This allows us to eliminate
the OMAP1/OMAP2 differences for the function clock.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Eliminate the OMAP1 vs OMAP2 clock knowledge in the watchdog driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This eliminates the need for separate OMAP24xx and OMAP34xx clock
requesting code sections.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

By providing a dummy clock node, we can eliminate the SoC conditional
clock handing in the OMAP drivers, moving this knowledge out of the
driver and into the machine clock support code.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This stops things blowing up if a 'struct clk' to be passed more
than once to clk_register(), which will be required when we decouple
struct clk's from their names.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is needed to use these with the clkdev helpers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It makes no sense to have the CKCTL rate selection implemented as a flag
and a special exception in the top level set_rate/round_rate methods.
Provide CKCTL set_rate/round_rate methods, and use these for where ever
RATE_CKCTL is used and they're not already overridden.  This allows us
to remove the RATE_CKCTL flag.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

propagate_rate() is recursive, so it makes sense to minimise the
amount of stack which is used for each recursion.  So, rather than
recursing back into it from the ->recalc functions if RATE_PROPAGATES
is set, do that test at the higher level.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We've always called propagate_rate() in the parent function to
the .set_rate methods, so there's no point having the .set_rate
methods also call this heavy-weight function - it's mere
duplication of what's happening elsewhere.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the clock propagation calls for set_parent and set_rate into
the core omap clock code, rather than having these calls scattered
throughout the OMAP1 and OMAP2 implementations.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

which only has to return clk->parent.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Nothing makes any use of these functions, so there's little point in
providing them.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... to eliminate unnecessary padding.  We have rather a lot of these
structures, so eliminating unnecessary padding results in a saving of
1488 bytes.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

clk->owner is always NULL, so its existence doesn't serve any useful
function other than bloating the kernel by 992 bytes.  Remove it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The original code in omap2_clk_wait_ready() used to check the low 8
bits to determine whether they were within the FCLKEN or ICLKEN
registers.  Specifically, the test is satisfied when these offsets
are used:

 CM_FCLKEN, CM_FCLKEN1, CM_CLKEN, OMAP24XX_CM_FCLKEN2, CM_ICLKEN,
 CM_ICLKEN1, CM_ICLKEN2, CM_ICLKEN3, OMAP24XX_CM_ICLKEN4
 OMAP3430_CM_CLKEN_PLL, OMAP3430ES2_CM_CLKEN2

If one of these offsets isn't used, omap2_clk_wait_ready() merely
returns without doing anything.  So we should use the non-wait clkops
version instead and eliminate that conditional.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than employing run-time tests in omap2_clk_wait_ready() to
decide whether we need to wait for the clock to become ready, we
can set the .ops appropriately.

This change deals with the OMAP24xx and OMAP34xx conditionals only.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

PARENT_CONTROLS_CLOCK just makes enable/disable no-op, and is
functionally an alias for ALWAYS_ENABLED.  This can be handled
in the same way, using clkops_null.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... and use it for clocks which are ALWAYS_ENABLED.  These clocks
use a non-NULL enable_reg pointer for other purposes (such as
selecting clock rates.)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Collect up all the common enable/disable clock operation functions
into a separate operations structure.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Nothing tests the clock flags for this bit, so it serves no purpose.
Remove it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>