- 05 9月, 2017 6 次提交
-
-
由 Masahiro Yamada 提交于
Remove unneeded variables and assignments. While we are here, fix the coding style of SMC37c669_read_config(): - replace whitespaces at the start of lines with tabs - remove unneeded whitespaces around parentheses Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Shyam Saini 提交于
Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by: NShyam Saini <mayhs11saini@gmail.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Dan Carpenter 提交于
We check that "member" is in bounds for the first line, but we also use it on the next line without checking which is a mistake. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Julia Cartwright 提交于
The alpha/marvel code currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: NJulia Cartwright <julia@ni.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Sergei Trofimovich 提交于
__NR_sys_epoll_create and friends are alpha-specific while __NR_epoll_create is a generic name for other arches. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Tobias Klauser 提交于
The arch uses a verbatim copy of the asm-generic version and does not add any own implemntations to the header, so use asm-generic/fb.h instead of duplicating code. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
- 30 8月, 2017 8 次提交
-
-
由 Ben Hutchings 提交于
This fixes compiler errors in perf such as: tests/attr.c: In function 'store_event': tests/attr.c:66:27: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__u64 {aka long unsigned int}' [-Werror=format=] snprintf(path, PATH_MAX, "%s/event-%d-%llu-%d", dir, ^ Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Tested-by: NMichael Cree <mcree@orcon.net.nz> Cc: stable@vger.kernel.org Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Guenter Roeck 提交于
Commit 3cc2dac5 ("drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC") introduces calls to ioremap_wc and ioremap_uc. This causes build failures with alpha:allmodconfig. Map the missing functions to ioremap_nocache. Fixes: 3cc2dac5 ("drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC") Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Matt Turner 提交于
Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Michael Cree 提交于
Since commit 71810db2 (modversions: treat symbol CRCs as 32 bit quantities) R_ALPHA_REFLONG relocations can be required to load modules. This implements it. Tested-by: NBob Tracy <rct@gherkin.frus.com> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Richard Henderson 提交于
Patch 85250231 introduced a typo. That said, the identity AND insns added by that patch are more clearly written as MOV. At the same time, re-schedule the ev6 version so that the first dispatch can execute in parallel. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Richard Henderson 提交于
There are direct branches between {str*cpy,str*cat} and stx*cpy. Ensure the branches are within range by merging these objects. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Matt Turner 提交于
pci_vga_hose is #defined to 0 in include/asm/vga.h if CONFIG_VGA_HOSE is not set. Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
- 29 8月, 2017 1 次提交
-
-
由 Alexey Brodkin 提交于
Recent commit a8ec3ee8 "arc: Mask individual IRQ lines during core INTC init" breaks interrupt handling on ARCv2 SMP systems. That commit masked all interrupts at onset, as some controllers on some boards (customer as well as internal), would assert interrutps early before any handlers were installed. For SMP systems, the masking was done at each cpu's core-intc. Later, when the IRQ was actually requested, it was unmasked, but only on the requesting cpu. For "common" interrupts, which were wired up from the 2nd level IDU intc, this was as issue as they needed to be enabled on ALL the cpus (given that IDU IRQs are by default served Round Robin across cpus) So fix that by NOT masking "common" interrupts at core-intc, but instead at the 2nd level IDU intc (latter already being done in idu_of_init()) Fixes: a8ec3ee8 ("arc: Mask individual IRQ lines during core INTC init") Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> [vgupta: reworked changelog, removed the extraneous idu_irq_mask_raw()] Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 8月, 2017 5 次提交
-
-
由 Paul Mackerras 提交于
Nixiaoming pointed out that there is a memory leak in kvm_vm_ioctl_create_spapr_tce() if the call to anon_inode_getfd() fails; the memory allocated for the kvmppc_spapr_tce_table struct is not freed, and nor are the pages allocated for the iommu tables. In addition, we have already incremented the process's count of locked memory pages, and this doesn't get restored on error. David Hildenbrand pointed out that there is a race in that the function checks early on that there is not already an entry in the stt->iommu_tables list with the same LIOBN, but an entry with the same LIOBN could get added between then and when the new entry is added to the list. This fixes all three problems. To simplify things, we now call anon_inode_getfd() before placing the new entry in the list. The check for an existing entry is done while holding the kvm->lock mutex, immediately before adding the new entry to the list. Finally, on failure we now call kvmppc_account_memlimit to decrement the process's count of locked memory pages. Reported-by: NNixiaoming <nixiaoming@huawei.com> Reported-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eric Biggers 提交于
The following commit: 39a0526f ("x86/mm: Factor out LDT init from context init") renamed init_new_context() to init_new_context_ldt() and added a new init_new_context() which calls init_new_context_ldt(). However, the error code of init_new_context_ldt() was ignored. Consequently, if a memory allocation in alloc_ldt_struct() failed during a fork(), the ->context.ldt of the new task remained the same as that of the old task (due to the memcpy() in dup_mm()). ldt_struct's are not intended to be shared, so a use-after-free occurred after one task exited. Fix the bug by making init_new_context() pass through the error code of init_new_context_ldt(). This bug was found by syzkaller, which encountered the following splat: BUG: KASAN: use-after-free in free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116 Read of size 4 at addr ffff88006d2cb7c8 by task kworker/u9:0/3710 CPU: 1 PID: 3710 Comm: kworker/u9:0 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116 free_ldt_struct arch/x86/kernel/ldt.c:173 [inline] destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171 destroy_context arch/x86/include/asm/mmu_context.h:157 [inline] __mmdrop+0xe9/0x530 kernel/fork.c:889 mmdrop include/linux/sched/mm.h:42 [inline] exec_mmap fs/exec.c:1061 [inline] flush_old_exec+0x173c/0x1ff0 fs/exec.c:1291 load_elf_binary+0x81f/0x4ba0 fs/binfmt_elf.c:855 search_binary_handler+0x142/0x6b0 fs/exec.c:1652 exec_binprm fs/exec.c:1694 [inline] do_execveat_common.isra.33+0x1746/0x22e0 fs/exec.c:1816 do_execve+0x31/0x40 fs/exec.c:1860 call_usermodehelper_exec_async+0x457/0x8f0 kernel/umh.c:100 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Allocated by task 3700: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x136/0x750 mm/slab.c:3627 kmalloc include/linux/slab.h:493 [inline] alloc_ldt_struct+0x52/0x140 arch/x86/kernel/ldt.c:67 write_ldt+0x7b7/0xab0 arch/x86/kernel/ldt.c:277 sys_modify_ldt+0x1ef/0x240 arch/x86/kernel/ldt.c:307 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3700: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 free_ldt_struct.part.2+0xdd/0x150 arch/x86/kernel/ldt.c:121 free_ldt_struct arch/x86/kernel/ldt.c:173 [inline] destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171 destroy_context arch/x86/include/asm/mmu_context.h:157 [inline] __mmdrop+0xe9/0x530 kernel/fork.c:889 mmdrop include/linux/sched/mm.h:42 [inline] __mmput kernel/fork.c:916 [inline] mmput+0x541/0x6e0 kernel/fork.c:927 copy_process.part.36+0x22e1/0x4af0 kernel/fork.c:1931 copy_process kernel/fork.c:1546 [inline] _do_fork+0x1ef/0xfb0 kernel/fork.c:2025 SYSC_clone kernel/fork.c:2135 [inline] SyS_clone+0x37/0x50 kernel/fork.c:2129 do_syscall_64+0x26c/0x8c0 arch/x86/entry/common.c:287 return_from_SYSCALL_64+0x0/0x7a Here is a C reproducer: #include <asm/ldt.h> #include <pthread.h> #include <signal.h> #include <stdlib.h> #include <sys/syscall.h> #include <sys/wait.h> #include <unistd.h> static void *fork_thread(void *_arg) { fork(); } int main(void) { struct user_desc desc = { .entry_number = 8191 }; syscall(__NR_modify_ldt, 1, &desc, sizeof(desc)); for (;;) { if (fork() == 0) { pthread_t t; srand(getpid()); pthread_create(&t, NULL, fork_thread, NULL); usleep(rand() % 10000); syscall(__NR_exit_group, 0); } wait(NULL); } } Note: the reproducer takes advantage of the fact that alloc_ldt_struct() may use vmalloc() to allocate a large ->entries array, and after commit: 5d17a73a ("vmalloc: back off when the current task is killed") it is possible for userspace to fail a task's vmalloc() by sending a fatal signal, e.g. via exit_group(). It would be more difficult to reproduce this bug on kernels without that commit. This bug only affected kernels with CONFIG_MODIFY_LDT_SYSCALL=y. Signed-off-by: NEric Biggers <ebiggers@google.com> Acked-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> [v4.6+] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Fixes: 39a0526f ("x86/mm: Factor out LDT init from context init") Link: http://lkml.kernel.org/r/20170824175029.76040-1-ebiggers3@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Paolo Bonzini 提交于
The host pkru is restored right after vcpu exit (commit 1be0e61c), so KVM_GET_XSAVE will return the host PKRU value instead. Fix this by using the guest PKRU explicitly in fill_xsave and load_xsave. This part is based on a patch by Junkang Fu. The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state, because it could have been changed by userspace since the last time it was saved, so skip loading it in kvm_load_guest_fpu. Reported-by: NJunkang Fu <junkang.fjk@alibaba-inc.com> Cc: Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61c Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a simple comparison against the host value of the register. The write of PKRU in addition can be skipped if the guest has not enabled the feature. Once we do this, we need not test OSPKE in the host anymore, because guest_CR4.PKE=1 implies host_CR4.PKE=1. The static PKU test is kept to elide the code on older CPUs. Suggested-by: NYang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61c Cc: stable@vger.kernel.org Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
If the host has protection keys disabled, we cannot read and write the guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block the PKU cpuid bit in that case. This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1. Fixes: 1be0e61c Cc: stable@vger.kernel.org Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 24 8月, 2017 6 次提交
-
-
由 Rob Herring 提交于
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: NRob Herring <robh@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Krzysztof Kozlowski 提交于
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - MISC_DEVICES: commit 7c5763b8 ("drivers: misc: Remove MISC_DEVICES config option"); Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
This adds missing memory barriers to order updates/tests of the virtual CPPR and MFRR, thus fixing a lost IPI problem. While at it also document all barriers in this file. This fixes a bug causing guest IPIs to occasionally get lost. The symptom then is hangs or stalls in the guest. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
-
由 Benjamin Herrenschmidt 提交于
This adds a workaround for a bug in POWER9 DD1 chips where changing the CPPR (Current Processor Priority Register) can cause bits in the IPB (Interrupt Pending Buffer) to get lost. Thankfully it only happens when manually manipulating CPPR which is quite rare. When it does happen it can cause interrupts to be delayed or lost. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
-
由 Nicholas Piggin 提交于
When msgsnd is used for IPIs to other cores, msgsync must be executed by the target to order stores performed on the source before its msgsnd (provided the source executes the appropriate sync). Fixes: 1704a81c ("KVM: PPC: Book3S HV: Use msgsnd for IPIs to other cores on POWER9") Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
-
由 Hans Verkuil 提交于
CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set 'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal, just as for the exynos4 Odroid-U3. This is due to the level-shifter that is disabled when there is no HPD, thus blocking the CEC signal as well. Same close-but-no-cigar board design as the Odroid-U3. Tested with my Odroid XU4. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 23 8月, 2017 5 次提交
-
-
由 Arnd Bergmann 提交于
My previous patch fixed a link error for all at91 platforms when CONFIG_ARM_CPU_SUSPEND was not set, however this caused another problem on a configuration that enabled CONFIG_ARCH_AT91 but none of the individual SoCs, and that also enabled CPU_ARM720 as the only CPU: warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE) arch/arm/kernel/sleep.o: In function `cpu_resume': (.text+0xf0): undefined reference to `cpu_arm720_suspend_size' arch/arm/kernel/suspend.o: In function `__cpu_suspend_save': suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend' This improves the hack some more by only selecting ARM_CPU_SUSPEND for the part that requires it, and changing pm.c to drop the contents of unused init functions so we no longer refer to cpu_resume on at91 platforms that don't need it. Fixes: cc7a938f ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND") Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Catalin Marinas 提交于
With 16KB pages and a kernel Image larger than 16MB, the current kaslr_early_init() logic for avoiding mappings across swapper table boundaries fails since increasing the offset by kimg_sz just moves the problem to the next boundary. This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the Image crosses a PMD_SIZE boundary. Fixes: afd0e5a8 ("arm64: kaslr: Fix up the kernel image alignment") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
In the KASLR setup routine, we ensure that the early virtual mapping of the kernel image does not cover more than a single table entry at the level above the swapper block level, so that the assembler routines involved in setting up this mapping can remain simple. In this calculation we add the proposed KASLR offset to the values of the _text and _end markers, and reject it if they would end up falling in different swapper table sized windows. However, when taking the addresses of _text and _end, the modulo offset (the physical displacement modulo 2 MB) is already accounted for, and so adding it again results in incorrect results. So disregard the modulo offset from the calculation. Fixes: 08cdac61 ("arm64: relocatable: deal with physically misaligned ...") Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Mark Rutland 提交于
When there's a fatal signal pending, arm64's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: NSteve Capper <steve.capper@arm.com> Tested-by: NSteve Capper <steve.capper@arm.com> Reviewed-by: NJames Morse <james.morse@arm.com> Tested-by: NJames Morse <james.morse@arm.com> Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Dave Martin 提交于
There are some tricky dependencies between the different stages of flushing the FPSIMD register state during exec, and these can race with context switch in ways that can cause the old task's regs to leak across. In particular, a context switch during the memset() can cause some of the task's old FPSIMD registers to reappear. Disabling preemption for this small window would be no big deal for performance: preemption is already disabled for similar scenarios like updating the FPSIMD registers in sigreturn. So, instead of rearranging things in ways that might swap existing subtle bugs for new ones, this patch just disables preemption around the FPSIMD state flushing so that races of this type can't occur here. This brings fpsimd_flush_thread() into line with other code paths. Cc: stable@vger.kernel.org Fixes: 674c242c ("arm64: flush FP/SIMD state correctly after execve()") Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NDave Martin <Dave.Martin@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 22 8月, 2017 1 次提交
-
-
由 Thomas Petazzoni 提交于
When building the kernel for Sparc using gcc 7.x, the build fails with: arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’: arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized] cmd |= PCI_COMMAND_IO; ^~ The simplified code looks like this: unsigned int cmd; [...] pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); [...] cmd |= PCI_COMMAND_IO; I.e, the code assumes that pcic_read_config() will always initialize cmd. But it's not the case. Looking at pcic_read_config(), if bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will not be initialized. As a simple fix, we initialize cmd to zero at the beginning of pcibios_fixup_bus. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2017 2 次提交
-
-
由 Heiko Carstens 提交于
sthyi should only generate a specification exception if the function code is zero and the response buffer is not on a 4k boundary. The current code would also test for unknown function codes if the response buffer, that is currently only defined for function code 0, is not on a 4k boundary and incorrectly inject a specification exception instead of returning with condition code 3 and return code 4 (unsupported function code). Fix this by moving the boundary check. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Cc: <stable@vger.kernel.org> # 4.8+ Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
The sthyi inline assembly misses register r3 within the clobber list. The sthyi instruction will always write a return code to register "R2+1", which in this case would be r3. Due to that we may have register corruption and see host crashes or data corruption depending on how gcc decided to allocate and use registers during compile time. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Cc: <stable@vger.kernel.org> # 4.8+ Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 19 8月, 2017 2 次提交
-
-
由 Kees Cook 提交于
Moving the x86_64 and arm64 PIE base from 0x555555554000 to 0x000100000000 broke AddressSanitizer. This is a partial revert of: eab09532 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE") 02445990 ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB") The AddressSanitizer tool has hard-coded expectations about where executable mappings are loaded. The motivation for changing the PIE base in the above commits was to avoid the Stack-Clash CVEs that allowed executable mappings to get too close to heap and stack. This was mainly a problem on 32-bit, but the 64-bit bases were moved too, in an effort to proactively protect those systems (proofs of concept do exist that show 64-bit collisions, but other recent changes to fix stack accounting and setuid behaviors will minimize the impact). The new 32-bit PIE base is fine for ASan (since it matches the ET_EXEC base), so only the 64-bit PIE base needs to be reverted to let x86 and arm64 ASan binaries run again. Future changes to the 64-bit PIE base on these architectures can be made optional once a more dynamic method for dealing with AddressSanitizer is found. (e.g. always loading PIE into the mmap region for marked binaries.) Link: http://lkml.kernel.org/r/20170807201542.GA21271@beast Fixes: eab09532 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE") Fixes: 02445990 ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB") Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NKostya Serebryany <kcc@google.com> Acked-by: NWill Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicholas Piggin 提交于
Commit 05a4a952 ("kernel/watchdog: split up config options") lost the perf-based hardlockup detector's dependency on PERF_EVENTS, which can result in broken builds with some powerpc configurations. Restore the dependency. Add it in for x86 too, despite x86 always selecting PERF_EVENTS it seems reasonable to make the dependency explicit. Link: http://lkml.kernel.org/r/20170810114452.6673-1-npiggin@gmail.com Fixes: 05a4a952 ("kernel/watchdog: split up config options") Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Acked-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 8月, 2017 4 次提交
-
-
由 Thomas Gleixner 提交于
The hardlockup detector on x86 uses a performance counter based on unhalted CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the performance counter period, so the hrtimer should fire 2-3 times before the performance counter NMI fires. The NMI code checks whether the hrtimer fired since the last invocation. If not, it assumess a hard lockup. The calculation of those periods is based on the nominal CPU frequency. Turbo modes increase the CPU clock frequency and therefore shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x nominal frequency) the perf/NMI period is shorter than the hrtimer period which leads to false positives. A simple fix would be to shorten the hrtimer period, but that comes with the side effect of more frequent hrtimer and softlockup thread wakeups, which is not desired. Implement a low pass filter, which checks the perf/NMI period against kernel time. If the perf/NMI fires before 4/5 of the watchdog period has elapsed then the event is ignored and postponed to the next perf/NMI. That solves the problem and avoids the overhead of shorter hrtimer periods and more frequent softlockup thread wakeups. Fixes: 58687acb ("lockup_detector: Combine nmi_watchdog and softlockup detector") Reported-and-tested-by: NKan Liang <Kan.liang@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: dzickus@redhat.com Cc: prarit@redhat.com Cc: ak@linux.intel.com Cc: babu.moger@oracle.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: acme@redhat.com Cc: stable@vger.kernel.org Cc: atomlin@redhat.com Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
-
由 Arvind Yadav 提交于
attribute_groups are not supposed to change at runtime and none of the groups is modified. Mark the non-const structs as const. [ tglx: Folded into one big patch ] Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: tony.luck@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1500550238-15655-2-git-send-email-arvind.yadav.cs@gmail.com
-
由 Benjamin Herrenschmidt 提交于
There is no guarantee that the various isync's involved with the context switch will order the update of the CPU mask with the first TLB entry for the new context being loaded by the HW. Be safe here and add a memory barrier to order any subsequent load/store which may bring entries into the TLB. The corresponding barrier on the other side already exists as pte updates use pte_xchg() which uses __cmpxchg_u64 which has a sync after the atomic operation. Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: NNicholas Piggin <npiggin@gmail.com> [mpe: Add comments in the code] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gary Bisson 提交于
Previous value was a bad copy of nitrogen6_max device tree. Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Fixes: 3faa1bb2 ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Cc: <stable@vger.kernel.org> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-