The next_ordered flag is only meaningful for devices that use __make_request.
So move the test against next_ordered out of generic code and in to
__make_request

Since this test was added, barriers have not worked on md or any
devices that don't use __make_request and so don't bother to set
next_ordered.  (dm explicitly sets something other than
QUEUE_ORDERED_NONE since
  commit 99360b4c
but notes in the comments that it is otherwise meaningless).

Cc: Ken Milmore <ken.milmore@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@carl.(none)>

When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Move the defaults to where we do the init of the backing_dev_info.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the following 2 interfaces for request-stacking drivers:

  - blk_rq_prep_clone(struct request *clone, struct request *orig,
		      struct bio_set *bs, gfp_t gfp_mask,
		      int (*bio_ctr)(struct bio *, struct bio*, void *),
		      void *data)
      * Clones bios in the original request to the clone request
        (bio_ctr is called for each cloned bios.)
      * Copies attributes of the original request to the clone request.
        The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not
        copied.

  - blk_rq_unprep_clone(struct request *clone)
      * Frees cloned bios from the clone request.

Request stacking drivers (e.g. request-based dm) need to make a clone
request for a submitted request and dispatch it to other devices.

To allocate request for the clone, request stacking drivers may not
be able to use blk_get_request() because the allocation may be done
in an irq-disabled context.
So blk_rq_prep_clone() takes a request allocated by the caller
as an argument.

For each clone bio in the clone request, request stacking drivers
should be able to set up their own completion handler.
So blk_rq_prep_clone() takes a callback function which is called
for each clone bio, and a pointer for private data which is passed
to the callback.

NOTE:
blk_rq_prep_clone() doesn't copy any actual data of the original
request.  Pages are shared between original bios and cloned bios.
So caller must not complete the original request before the clone
request.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Tejun's "block: set rq->resid_len to blk_rq_bytes() on issue" patch
seems to be incomplete; It doesn't set rq->resid_len to blk_rq_bytes()
for a bidi request (req->next_rq). As a result, all bidi users are
broken.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Doing a bit of torture testing, I ran across a BUG in the block
subsystem (at blk-core.c:2048): the test for if the request is queued.

It turns out the trigger was a BLKPREP_KILL coming out of the SCSI prep
function.  Currently for BLKPREP_KILL requests, we send them straight
into __blk_end_request_all() with an error, but they've never been
dequeued, so they trip the bug.  Fix this by starting requests before
killing them.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

commit e8939a50466fd963eb1ba9118c34b9ffb7ff6aa6
Author: Tejun Heo <tj@kernel.org>
Date:   Fri May 8 11:54:16 2009 +0900

    block: implement and enforce request peek/start/fetch

Added a BUG_ON(blk_queued_rq(req)) to the top of blk_finish_req().
Unfortunately, this checks whether req->queuelist is empty.  This list
is doing double duty both as the queue list and the tag list, so tagged
requests come in here with this not empty and boom (the tag list is
emptied by blk_queue_end_tag() lower down).

Fix this by moving the BUG_ON to below the end tag we also seem
vulnerable to this in blk_requeue_request() as well.  I think all uses
of blk_queued_rq() need auditing because the check is clearly wrong in
the tagged case.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Make them fully share the tag space, but disallow async requests using
the last any two slots.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Add a note about how one needs to be careful when setting up these bio
chains.

Extracted from Boaz's updated patch.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

New block API:
given a struct bio allocates a new request. This is the parallel of
generic_make_request for BLOCK_PC commands users.

The passed bio may be a chained-bio. The bio is bounced if needed
inside the call to this member.

This is in the effort of un-exporting blk_rq_append_bio().
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

In commit c3a4d78c, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero.  The conversion was done under the assumption that
when a request fails residue count wasn't defined.  However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.

This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers.  While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.

* ide-cd: rq->resid_len cleared on pc success

* mptsas: req->resid_len cleared on success

* sas_expander: rsp/req->resid_len cleared on success

* mpt2sas_transport: req->resid_len cleared on success

* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
  advantage of initial full count to simplify code

Boaz Harrosh spotted bug in resid_len initialization.  Fixed as
suggested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NBorislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)
Signed-off-by: NKazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Let's put the completion related functions back to block/blk-core.c
where they have lived. We can also unexport blk_end_bidi_request() and
__blk_end_bidi_request(), which nobody uses.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Block low level drivers for some reason have been pretty good at
abusing block layer API.  Especially struct request's fields tend to
get violated in all possible ways.  Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.

This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.

[ Impact: hide internal fields, block API change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NMike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Ackec-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.

[ Impact: cleanup ]
Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF517C.7000503@hp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We currently check for file system requests outside of blk_do_io_stat(rq),
but we may as well just include it.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Now that all block request data transfer is done via bio, rq->data
isn't used.  Kill it.

While at it, make the roles of rq->special and buffer clear.

[ Impact: drop now unncessary field from struct request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>

There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion.  Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.

This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request.  BUG_ON() is added to to ensure that
this actually happens.

Most conversions are simple but there are a few noteworthy ones.

* cdrom/viocd: viocd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/block/dasd: dasd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/char/tape_block: tapeblock_end_request() replaced with direct
  calls to blk_end_request_all().

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>

rq->start_time was initialized in init_request_from_bio() so special
requests didn't have start_time set.  This has been okay as start_time
has been used only for fs requests; however, there is no indication of
this actually is the case or not.  Set rq->start_time in blk_rq_init()
and guarantee that all initialized rq's have its start_time set.  This
improves consistency at virtually no cost and future changes will make
use of the timestamp for !bio requests.

[ Impact: rq->start_time is valid for all requests ]
Signed-off-by: NTejun Heo <tj@kernel.org>

Request completion has gone through several changes and became a bit
messy over the time.  Clean it up.

1. end_that_request_data() is a thin wrapper around
   end_that_request_data_first() which checks whether bio is NULL
   before doing anything and handles bidi completion.
   blk_update_request() is a thin wrapper around
   end_that_request_data() which clears nr_sectors on the last
   iteration but doesn't use the bidi completion.

   Clean it up by moving the initial bio NULL check and nr_sectors
   clearing on the last iteration into end_that_request_data() and
   renaming it to blk_update_request(), which makes blk_end_io() the
   only user of end_that_request_data().  Collapse
   end_that_request_data() into blk_end_io().

2. There are four visible completion variants - blk_end_request(),
   __blk_end_request(), blk_end_bidi_request() and end_request().
   blk_end_request() and blk_end_bidi_request() uses blk_end_request()
   as the backend but __blk_end_request() and end_request() use
   separate implementation in __blk_end_request() due to different
   locking rules.

   blk_end_bidi_request() is identical to blk_end_io().  Collapse
   blk_end_io() into blk_end_bidi_request(), separate out request
   update into internal helper blk_update_bidi_request() and add
   __blk_end_bidi_request().  Redefine [__]blk_end_request() as thin
   inline wrappers around [__]blk_end_bidi_request().

3. As the whole request issue/completion usages are about to be
   modified and audited, it's a good chance to convert completion
   functions return bool which better indicates the intended meaning
   of return values.

4. The function name end_that_request_last() is from the days when it
   was a public interface and slighly confusing.  Give it a proper
   internal name - blk_finish_request().

5. Add description explaning that blk_end_bidi_request() can be safely
   used for uni requests as suggested by Boaz Harrosh.

The only visible behavior change is from #1.  nr_sectors counts are
cleared after the final iteration no matter which function is used to
complete the request.  I couldn't find any place where the code
assumes those nr_sectors counters contain the values for the last
segment and this change is good as it makes the API much more
consistent as the end result is now same whether a request is
completed using [__]blk_end_request() alone or in combination with
blk_update_request().

API further cleaned up per Christoph's suggestion.

[ Impact: cleanup, rq->*nr_sectors always updated after req completion ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>

With recent IDE updates, blk_end_request_callback() doesn't have any
user now.  Kill it.

[ Impact: removal of unused convoluted interface ]
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: code reorganization

elv_next_request() and elv_dequeue_request() are public block layer
interface than actual elevator implementation.  They mostly deal with
how requests interact with block layer and low level drivers at the
beginning of rqeuest processing whereas __elv_next_request() is the
actual eleveator request fetching interface.

Move the two functions to blk-core.c.  This prepares for further
interface cleanup.
Signed-off-by: NTejun Heo <tj@kernel.org>

Reorder request completion functions such that

* All request completion functions are located together.

* Functions which are used by only one caller is put right above the
  caller.

* end_request() is put after other completion functions but before
  blk_update_request().

This change is for completion function cleanup which will follow.

[ Impact: cleanup, code reorganization ]
Signed-off-by: NTejun Heo <tj@kernel.org>

blk_insert_request() doesn't need to worry about REQ_SOFTBARRIER.
Don't set it.  Combined with recent ide updates, REQ_SOFTBARRIER is
now only used in elevator proper and for discard requests.

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>

RQ_NOMERGE_FLAGS already clears defines which REQ flags aren't
mergeable.  There is no reason to specify it superflously.  It only
adds to confusion.  Don't set REQ_NOMERGE for barriers and requests
with specific queueing directive.  REQ_NOMERGE is now exclusively used
by the merging code.

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>

blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion.  None of the current users depends on
blk_start_queueing() running request_fn directly.  Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.

[ Impact: removal of mostly duplicate interface function ]
Signed-off-by: NTejun Heo <tj@kernel.org>

__blk_run_queue wraps blk_invoke_request_fn() such that it
additionally removes plug and bails out early if the queue is empty.
Both extra operations have their own pending mechanisms and don't
cause any harm correctness-wise when they are done superflously.

The only user of blk_invoke_request_fn() being blk_start_queue(),
there isn't much reason to keep both functions around.  Merge
blk_invoke_request_fn() into __blk_run_queue() and make
blk_start_queue() use __blk_run_queue() instead.

[ Impact: merge two subtly different internal functions ]
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: subtle behavior change

For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much.  This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.

For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.

The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path.  However, future changes will
unify data accesses to bio and all non fs users care about rq error
status.  Clear rq->errors on bio completion only for fs requests.

In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers.  Unifying / cleaning up rq->errors usage and letting llds
manage it would be better.  TODO comment added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJens Axboe <axboe@kernel.dk>

This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.

Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Impact: subtle behavior change

For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much.  This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.

For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.

The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path.  However, future changes will
unify data accesses to bio and all non fs users care about rq error
status.  Clear rq->errors on bio completion only for fs requests.

In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers.  Unifying / cleaning up rq->errors usage and letting llds
manage it would be better.  TODO comment added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJens Axboe <axboe@kernel.dk>