Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 10 11月, 2015 25 次提交
  3. 06 11月, 2015 1 次提交
  5. 30 10月, 2015 14 次提交
    • M
      cxlflash: Fix to avoid bypassing context cleanup · a82544c7
      由 Matthew R. Ochs 提交于 
      Contexts may be skipped over for cleanup in situations where contention
for the adapter's table-list mutex is experienced in the presence of a
signal during the execution of the release handler.

This can lead to two known issues:

 - A hang condition on remove as that path tries to wait for users to
   cleanup - something that will never complete should this scenario play
   out as the user has already cleaned up from their perspective.

 - An Oops in the unmap_mapping_range() call that is made as part of
   the user waiting mechanism that is invoked on remove when contexts
   are found to still exist.

The root cause of this issue can be found in get_context() and how the
table-list mutex is acquired. As this code path is shared by several
different access points within the driver, a decision was made during
the development cycle to acquire this mutex in this location using the
interruptible version of the mutex locking service. In almost all of
the use-cases and environmental scenarios this holds up, even when the
mutex is contended. However, for critical system threads (such as the
release handler), failing to acquire the mutex and bailing with the
intention of the user being able to try again later is unacceptable.

In such a scenario, the context _must_ be derived as it is on an
irreversible path to being freed. Without being able to derive the
context, the code mistakenly assumes that it has already been freed
and proceeds to free up the underlying CXL context resources. From
this point on, any usage of [the now stale] CXL context resources
will result in undefined behavior. This is root cause of the Oops
mentioned as the second known issue as the mapping passed to the
unmap_mapping_range() service is owned by the CXL context.

To fix this problem, acquisition of the table-list mutex within
get_context() is simply changed to use the uninterruptible version
of the mutex locking service. This is safe as the timing windows for
holding this mutex are short and also protected against blocking.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      a82544c7
    • M
      cxlflash: Fix to avoid lock instrumentation rejection · 0d73122c
      由 Matthew R. Ochs 提交于 
      When running with lock instrumentation (e.g. lockdep), some of the
instrumentation can become disabled at probe time for a cxlflash
adapter. This is due to a missing lock registration for the tmf_slock.

The fix is to call spin_lock_init() for the tmf_slock during probe.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      0d73122c
    • M
      cxlflash: Fix to avoid corrupting port selection mask · 1a47401b
      由 Matthew R. Ochs 提交于 
      The port selection mask of a LUN can be corrupted when the manage LUN
ioctl (DK_CXLFLASH_MANAGE_LUN) is issued more than once for any device.

This mask indicates to the AFU which port[s] can be used for a data
transfer to/from a particular LUN. The mask is critical to ensuring the
correct behavior when using the virtual LUN function of this adapter.
When the mask is configured for both ports, an I/O may be sent to either
port as the AFU assumes that each port has access to the same physical
device (specified by LUN ID in the port LUN table).

In a situation where the mask becomes incorrectly configured to reflect
access to both ports when in fact there is only access through a single
port, an I/O can be targeted to the wrong physical device. This can lead
to data corruption among other ill effects (e.g. security leaks).

The cause for this corruption is the assumption that the ioctl will only
be called a second time for a LUN when it is being configured for access
via a second port. A boolean 'newly_created' variable is used to
differentiate between a LUN that was created (and subsequently configured
for single port access) and one that is destined for access across both
ports. While initially set to 'true', this sticky boolean is toggled to
the 'false' state during a lookup on any next ioctl performed on a device
with a matching WWN/WWID. The code fails to realize that the match could
in fact be the same device calling in again. From here, an assumption is
made that any LUN with 'newly_created' set to 'false' is configured for
access over both ports and the port selection mask is set to reflect this.
Any future attempts to use this LUN for hosting a virtual LUN will result
in the port LUN table being incorrectly programmed.

As a remedy, the 'newly_created' concept was removed entirely and replaced
with code that always constructs the port selection mask based upon the
SCSI channel of the LUN being accessed. The bits remain sticky, therefore
allowing for a device to be accessed over both ports when that is in fact
the correct physical configuration.

Also included in this commit are a few minor related changes to enhance
the fix and provide better debug information for port selection mask and
port LUN table bugs in the future. These include renaming refresh_local()
to lookup_local(), tracing the WWN/WWID as a big-endian entity, and
tracing the port selection mask, SCSI channel, and LUN ID each time the
port LUN table is programmed.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      1a47401b
    • M
      cxlflash: Fix to escalate to LINK_RESET on login timeout · e6e6df3f
      由 Manoj Kumar 提交于 
      A 'login timed out' asynchronous error interrupt is generated if no
response is seen to a FLOGI within 2 seconds.  If the time out error
is not escalated to a LINK_RESET the port will not be available for
use. This fix provides the required escalation.
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      e6e6df3f
    • M
      cxlflash: Fix to avoid leaving dangling interrupt resources · ee3491ba
      由 Matthew R. Ochs 提交于 
      When running with an unsupported AFU, the cxlflash driver fails
the probe. When the driver is removed, the following Oops is
encountered on a show_interrupts() thread:

Call Trace:
[c000001fba5a7a10] [0000000000000003] 0x3 (unreliable)
[c000001fba5a7a60] [c00000000053dcf4] vsnprintf+0x204/0x4c0
[c000001fba5a7ae0] [c00000000030045c] seq_vprintf+0x5c/0xd0
[c000001fba5a7b20] [c00000000030051c] seq_printf+0x4c/0x60
[c000001fba5a7b50] [c00000000013e140] show_interrupts+0x370/0x4f0
[c000001fba5a7c10] [c0000000002ff898] seq_read+0xe8/0x530
[c000001fba5a7ca0] [c00000000035d5c0] proc_reg_read+0xb0/0x110
[c000001fba5a7cf0] [c0000000002ca74c] __vfs_read+0x6c/0x180
[c000001fba5a7d90] [c0000000002cb464] vfs_read+0xa4/0x1c0
[c000001fba5a7de0] [c0000000002cc51c] SyS_read+0x6c/0x110
[c000001fba5a7e30] [c000000000009204] system_call+0x38/0xb4

The Oops is due to not cleaning up correctly on the unsupported
AFU error path, leaving various allocated and registered resources.
In this case, interrupts are in a semi-allocated/registered state,
which the show_interrupts() thread attempts to use.

To fix, the cleanup logic in init_afu() is consolidated to error
gates at the bottom of the function and the appropriate goto is
added to each error path. As a mini side fix while refactoring
in this routine, the else statement following the AFU version
evaluation is eliminated as it is not needed.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      ee3491ba
    • M
      cxlflash: Fix to avoid potential deadlock on EEH · aacb4ff6
      由 Matthew R. Ochs 提交于 
      Ioctl threads that use scsi_execute() can run for an excessive amount
of time due to the fact that they have lengthy timeouts and retry logic
built in. Under normal operation this is not an issue. However, once EEH
enters the picture, a long execution time coupled with the possibility
that a timeout can trigger entry to the driver via registered reset
callbacks becomes a liability.

In particular, a deadlock can occur when an EEH event is encountered
while in running in scsi_execute(). As part of the recovery, the EEH
handler drains all currently running ioctls, waiting until they have
completed before proceeding with a reset. As the scsi_execute()'s are
situated on the ioctl path, the EEH handler will wait until they (and
the remainder of the ioctl handler they're associated with) have
completed. Normally this would not be much of an issue aside from the
longer recovery period. Unfortunately, the scsi_execute() triggers a
reset when it times out. The reset handler will see that the device is
already being reset and wait until that reset completed. This creates
a condition where the EEH handler becomes stuck, infinitely waiting for
the ioctl thread to complete.

To avoid this behavior, temporarily unmark the scsi_execute() threads
as an ioctl thread by releasing the ioctl read semaphore. This allows
the EEH handler to proceed with a recovery while the thread is still
running. Once the scsi_execute() returns, the ioctl read semaphore is
reacquired and the adapter state is rechecked in case it changed while
inside of scsi_execute(). The state check will wait if the adapter is
still being recovered or returns a failure if the recovery failed. In
the event that the adapter reset failed, the failure is simply returned
as the ioctl would be unable to continue.
Reported-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NDaniel Axtens <dja@axtens.net>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      aacb4ff6
    • M
      cxlflash: Correct trace string · fa3f2c6e
      由 Matthew R. Ochs 提交于 
      The trace following the failure of alloc_mem() incorrectly identifies
which function failed. This can lead to misdiagnosing a failure.

Fix the string to correctly indicate that alloc_mem() failed.
Reported-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      fa3f2c6e
    • M
      cxlflash: Fix to avoid corrupting adapter fops · 17ead26f
      由 Matthew R. Ochs 提交于 
      The fops owned by the adapter can be corrupted in certain scenarios,
opening a window where certain fops are temporarily NULLed before being
reset to their proper value. This can potentially lead software to make
incorrect decisions, leaving the user with the inability to function as
intended.

An example of this behavior can be observed when there are a number of
users with a high rate of turn around (attach to LUN, perform an I/O,
detach from LUN, repeat). Every so often a user is given a valid
context and adapter file descriptor, but the file associated with the
descriptor lacks the correct read permission bit (FMODE_CAN_READ) and
thus the read system call bails before calling the valid read fop.

Background:

The fops is stored in the adapter structure to provide the ability to
lookup the adapter structure from within the fop handler. CXL services
use the file's private_data and at present, the CXL context does not
have a private section. In an effort to limit areas of the cxlflash
driver with code specific the superpipe function, a design choice was
made to keep the details of the fops situated away from the legacy
portions of the driver. This drove the behavior that the adapter fops
is set at the beginning of the disk attach ioctl handler when there
are no users present.

The corruption that this fix remedies is due to the fact that the fops
is initially defaulted to values found within a static structure. When
the fops is handed down to the CXL services later in the attach path,
certain services are patched. The fops structure remains correct until
the user count drops to 0 and the fops is reset, triggering the process
to repeat again. The user counts are tightly coupled with the creation
and deletion of the user context. If multiple users perform a disk
attach at the same time, when the user count is currently 0, some users
can be in the middle of obtaining a file descriptor and have not yet
reached the context creation code that [in addition to creating the
context] increments the user count. Subsequent users coming in to
perform the attach see that the user count is still 0, and reinitialize
the fops, temporarily removing the patched fops. The users that are in
the middle obtaining their file descriptor may then receive an invalid
descriptor.

The fix simply removes the user count altogether and moves the fops
initialization to probe time such that it is only performed one time
for the life of the adapter. In the future, if the CXL services adopt
a private member for their context, that could be used to store the
adapter structure reference and cxlflash could revert to a model that
does not require an embedded fops.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NDaniel Axtens <dja@axtens.net>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      17ead26f
    • M
      cxlflash: Fix to double the delay each time · b22b4037
      由 Manoj Kumar 提交于 
      The operator used to double the master context response delay
is incorrect and does not result in delay doubling.

To fix, use a left shift instead of the XOR operator.
Reported-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      b22b4037
    • M
      MAINTAINERS: Add cxlflash driver · 11f43ae7
      由 Matthew R. Ochs 提交于 
      Add stanza for cxlflash SCSI driver.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      11f43ae7
    • M
      cxlflash: Fix to prevent stale AFU RRQ · af10483e
      由 Matthew R. Ochs 提交于 
      Following an adapter reset, the AFU RRQ that resides in host memory
holds stale data. This can lead to a condition where the RRQ interrupt
handler tries to process stale entries and/or endlessly loops due to an
out of sync generation bit.

To fix, the AFU RRQ in host memory needs to be cleared after each reset.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NDaniel Axtens <dja@axtens.net>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      af10483e
    • M
      cxlflash: Correct spelling, grammar, and alignment mistakes · f15fbf8d
      由 Matthew R. Ochs 提交于 
      There are several spelling and grammar mistakes throughout the
driver. Additionally there are a handful of places where there
are extra lines and unnecessary variables/statements. These are
a nuisance and pollute the driver.

Fix spelling and grammar issues. Update some comments for clarity and
consistency. Remove extra lines and a few unneeded variables/statements.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      f15fbf8d
    • M
      cxlflash: Fix to prevent EEH recovery failure · 8e782623
      由 Matthew R. Ochs 提交于 
      The process_sense() routine can perform a read capacity which
can take some time to complete. If an EEH occurs while waiting
on the read capacity, the EEH handler will wait to obtain the
context's mutex in order to put the context in an error state.
The EEH handler will sit and wait until the context is free,
but this wait can potentially last forever (deadlock) if the
scsi_execute() that performs the read capacity experiences a
timeout and calls into the reset callback. When that occurs,
the reset callback sees that the device is already being reset
and waits for the reset to complete. This leaves two threads
waiting on the other.

To address this issue, make the context unavailable to new,
non-system owned threads and release the context while calling
into process_sense(). After returning from process_sense() the
context mutex is reacquired and the context is made available
again. The context can be safely moved to the error state if
needed during the unavailable window as no other threads will
hold its reference.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NDaniel Axtens <dja@axtens.net>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      8e782623
    • M
      cxlflash: Fix MMIO and endianness errors · 1786f4a0
      由 Matthew R. Ochs 提交于 
      Sparse uncovered several errors with MMIO operations (accessing
directly) and handling endianness. These can cause issues when
running in different environments.

Introduce __iomem and proper endianness tags/swaps where
appropriate to make driver sparse clean.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
      1786f4a0