Fix the following warnings:
	drivers/media/usb/cx231xx/cx231xx-cards.c: In function 'read_eeprom':
	drivers/media/usb/cx231xx/cx231xx-cards.c:979:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:025e] PCTV QuatroStick 522e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:0259] PCTV QuatroStick 521e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1113xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)

After loading the driver the first open to dvb device node fails.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is needed to support PCTV QuatroStick 522e which uses a si2157.
The si2157 driver is written using i2c_client attachment.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The same card entry is used for HVR-4400 and HVR-5500.
Only HVR-5500 has been tested.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

DVB-T was tested  with 8MHz BW channels in germany
This driver is the simplest possible, it uses automatic mode for all
parameters (TPS).

Added spectrum inversion support.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We don't have license to redistribute this firmware, so extract
it from the driver, and add the needed headers.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using some random value, return an error if the
PCB config is not available or doesn't match a know profile
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That makes easier to understand the code. It would also help
to add support for having boards with just digital support
on some latter patch, as allowed by some PCB configs.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The initialization is already too complex. Use devm_ functions
to make the code simpler and easier to modify.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On some newer boards, like HVR-930C HD, the information at
the PCB tables are sometimes higher than the ones actually
available on the device. That causes the probing code to
go past the interfaces array.

Add checks to the interface number before going past the
array.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The max number of interfaces was read from the wrong descriptor.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This protocol is found on Dreambox remotes

[m.chehab@samsung.com: CodingStyle fixes and conflict fix]
Signed-off-by: NMarcel Mol <marcel@mesa.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Multiple pinctrl states are defined for 8, 16 and 24 data pin groups in PPI peripheral.
The driver should select correct group before set up further PPI parameters.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On NOMMU architecture page fault is not triggered if a deleted list entry is
accessed without reinit.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

if the pinctrl driver is enabled.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fixes an old copy+paste bug that has survived all recent code
changes in this code area.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of counting the number of opened file handles, use function
v4l2_fh_is_singular_file() in em28xx_v4l2_open() and em28xx_v4l2_close() to
determine if the file handle is the first/last opened one.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of calling

...
struct v4l2_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
filp->private_data = fh;
v4l2_fh_init(fh, vdev);
v4l2_fh_add(fh);
...

simply use function v4l2_fh_open() which does all of these calls for us.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

struct em28xx_fh isn't needed anymore because the only used field which is left is struct v4l2_fh fh.
Use struct v4l2_fh directly and remvove struct em28xx_fh.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Pointer v4l2" can be used instead of "dev->v4l2, which saves some characters.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fix checkpatch:
WARNING: else is not generally useful after a break or return
WARNING: line over 80 characters

[m.chehab@samsung.com: Fix conflicts and use a better coding style for
 passing the parameters to parport_register_device()]
Signed-off-by: NZheng Di <zhengdi05@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Expression ((7bit i2c_addr << 1) & 0x01) can not be right
because it is always 0
Signed-off-by: NRaimonds Cicans <ray@apollo.lv>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The crashed member of struct iss_device is documented to be a bitmask,
but a bool doesn't hold that many (usable) bits. Lines 589 and 659 of
iss.c strongly suggest that "unsigned int" was meant (the same type as
struct iss_pipeline::entities). Currently, any crashed entity will be
blamed on index 0, which is unlikely to be what was intended.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch introduces the use of managed interfaces like
devm_request_mem_region and devm_request_irq and does away with the
calls to free the allocated memory in the probe and remove functions.
The remove function is no longer required and is removed completely.
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fix checkpath "WARNING: void function return statements are not generally useful".
The removed return were useless in that case.
Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fix checkpath "WARNING: Missing a blank line after declarations"
Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds the necessary IDs for the following dvb cards:

Digital Devices Octopus Mini
Digital Devices Cine S2 V6.5
Digital Devices DVBCT V6.1
Digital Devices Octopus V3
Mystique SaTiX-S2 V3

All these changes are taken from the official driver package by Digital
Devices.
http://download.digital-devices.de/download/linux/

[m.chehab@samsung.com: Fixed whitespace mangling]
Signed-off-by: NChristopher Reimer <mail@creimer.net>
Tested-by: N"D. Herrendoerfer" <d.herrendoerfer@herrendoerfer.name>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

[media] drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c: remove unnecessary null test before usb_free_urb

Fix checkpatch warning:
WARNING: usb_free_urb(NULL) is safe this check is probably not required
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Variable b is not initialized.
Only with a small chance it has random value 0xFF.
Remove if statement based on this value.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Variable reg is not initialized.
Random values are written to OMAP4 ISS registers if !ctx->eof_enabled.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Tuner ID set into EEPROM is wrong, which causes driver to select
wrong tuner profile. That leads device non-working. Fix issue by
overriding known bad tuner IDs with suitable default value.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

changeset b601fe56 did some cleanup, but didn't remove some
now unused vars:
	drivers/media/dvb-frontends/drx39xyj/drxj.c: In function 'drx39xxj_set_frontend':
	drivers/media/dvb-frontends/drx39xyj/drxj.c:12072:21: warning: unused variable 'uio_data' [-Wunused-variable]
	drivers/media/dvb-frontends/drx39xyj/drxj.c: In function 'drx39xxj_set_lna':
	drivers/media/dvb-frontends/drx39xyj/drxj.c:12230:21: warning: unused variable 'uio_data' [-Wunused-variable]
	drivers/media/dvb-frontends/drx39xyj/drxj.c:12229:20: warning: unused variable 'uio_cfg' [-Wunused-variable]
	drivers/media/dvb-frontends/drx39xyj/drxj.c:12224:6: warning: unused variable 'result' [-Wunused-variable]
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/pci/cx23885/cx23885-dvb.c:768:2: warning: initialized field overwritten [-Woverride-init]
  .freq_offset_khz_vhf = 550,
  ^
drivers/media/pci/cx23885/cx23885-dvb.c:768:2: warning: (near initialization for 'dib7070p_dib0070_config.freq_offset_khz_vhf') [-Woverride-init]

Cc: James Harper <james.harper@ejbdigital.com.au>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

A few new devices were added. Update the lists accordingly.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Due to DViCO FusionHDTV DVB-T Dual Express2, we also need to
autoselect this tuner.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

DViCO FusionHDTV DVB-T Dual Express2 is cx23885 + dib7070

[m.chehab@samsung.com: fix conflicts and make checkpatch happy]
Signed-off-by: NJames Harper <james.harper@ejbdigital.com.au>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Patch originally written by Konrad. Rebased on current linux media tree.

Under Xen, vmalloc_32() isn't guaranteed to return pages which are really
under 4G in machine physical addresses (only in virtual pseudo-physical
addresses).  To work around this, implement a vmalloc variant which
allocates each page with dma_alloc_coherent() to guarantee that each
page is suitable for the device in question.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJames Harper <james.harper@ejbdigital.com.au>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>