This patch adds the platform specific support needed to control the
PCMCIA hardware on the Toshiba e740.
Signed-off-by: NIan Molton <spyro@f2s.com>

This code has been dead for many years. The last update it received
was in 2003 in order to update it for the driver model changes, though
it had already been in disarray and unused before that point. The only
boards that ever used this chip have not had users in many years either,
so it is finally safe to just kill it off and move on with life.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix build error introduced by commit 27c4cae2
[ARM] pxa: allow multi-machine PCMCIA builds

MODPOST 76 modules
ERROR: "cmx270_pcmcia_exit" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined!
ERROR: "cmx255_pcmcia_exit" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined!
ERROR: "cmx270_pcmcia_init" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined!
ERROR: "cmx255_pcmcia_init" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined!
make[2]: *** [__modpost] Error 1
make[1]: *** [modules] Error 2
make: *** [sub-make] Error 2
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRuss Dill <russ.dill@gmail.com>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Support for Trizeps4 SOM PCMCIA
with ConXS or other baseboards.
with double GPIO-free fixed (sorry!)

replaces 5279/1
Signed-off-by: NJurgen Schindele <linux@schindele.name>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The Arcom/Eurotech Viper needs some extra care to run. On this board,
the PC104 connector is actually wired to the second PCMCIA slot.
Therefore, this second socket needs to be enabled, despite not being
managed by the PCMCIA code.

I'd rather have the MECR setup in the platform support code so I could,
for example, use the PC104 bus without having the PCMCIA module loaded.
Signed-off-by: NMarc Zyngier <marc.zyngier@altran.com>

Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks
work properly.

(includes bugfixes from and
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
)
Signed-off-by: NDominik Broodwski <linux@dominikbrodowski.net>

PCMCIA driver for Palm LifeDrive
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds PCMCIA support for PalmTX handheld computer.
There is one chip hard-soldered to slot0, another slot is
not in use and not accessible.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A new host driver to add CompactFlash PCMCIA support for Blackfin.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Driver for the CompactFlash slot on the PA Semi Electra eval board. It's
a simple device sitting on localbus, with interrupts and detect/voltage
control over GPIO.

The driver is implemented as an of_platform driver, and adds localbus
as a bus being probed by the of_platform framework.

[akpm@linux-foundation.org: cleanups]
[olof@lixom.net: fix build]
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Milton Miller <miltonm@bga.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch provides support for PCMCIA on CM-X270
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds support for the Compact Flash controller integrated in
the Atmel AT91RM9200 processor.

Signed-off-by: Andrew Victor <andrew@sanpeople.com
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the compatibility wrappers, as they can (now) also be implemented
using macros. Please continue using these wrappers instead of new functions
until a new API has stabilized.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Kconfig entry: dependency on 8xx
Makefile: fix whitespace breakage
m8xx_pcmcia.c:
	- asm/segment.h is gone
	- use generic PCMCIA suspend/resume methods
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This adds support for pcmcia slot on sharp zaurus sl-5500.
pxa2xx_sharpsl.c thus becomes quite miss-named, but I guess that
is not worth fixing?
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Updated db1200_defconfig so pcmcia is enabled by default.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here is an uptodated version of the MPC8xx PCMCIA driver for v2.6,
addressing comments by Jeff and Dominik:

- use IO accessors instead of direct device memory referencing
- avoid usage of non-standard "uint/uchar" data types
- kill struct typedef's

Will submit it for inclusion once v2.6.14 is out.

Testing on 8xx platforms is more than welcome! Works like a charm
on our custom hardware (CONFIG_PRxK).

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds a socket driver for the OMAP CF controller; it's currently in use on
OSK boards.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the 16-bit PCMICA resource handling from pcmcia_core.o to pcmcia.o.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move all PCMCIA_IOCTL-related code to a different file.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

From: Richard Purdie <rpurdie@rpsys.net>

The pcmcia-move-pcmcia-ioctl-to-a-separate-file patch was corrupted in -mm2
causing this problem.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!