A "region" device represents the maximum capacity of a BLK range (mmio
block-data-window(s)), or a PMEM range (DAX-capable persistent memory or
volatile memory), without regard for aliasing.  Aliasing, in the
dimm-local address space (DPA), is resolved by metadata on a dimm to
designate which exclusive interface will access the aliased DPA ranges.
Support for the per-dimm metadata/label arrvies is in a subsequent
patch.

The name format of "region" devices is "regionN" where, like dimms, N is
a global ida index assigned at discovery time.  This id is not reliable
across reboots nor in the presence of hotplug.  Look to attributes of
the region or static id-data of the sub-namespace to generate a
persistent name.  However, if the platform configuration does not change
it is reasonable to expect the same region id to be assigned at the next
boot.

"region"s have 2 generic attributes "size", and "mapping"s where:
- size: the BLK accessible capacity or the span of the
  system physical address range in the case of PMEM.

- mappingN: a tuple describing a dimm's contribution to the region's
  capacity in the format (<nmemX>,<dpa>,<size>).  For a PMEM-region
  there will be at least one mapping per dimm in the interleave set.  For
  a BLK-region there is only "mapping0" listing the starting DPA of the
  BLK-region and the available DPA capacity of that space (matches "size"
  above).

The max number of mappings per "region" is hard coded per the
constraints of sysfs attribute groups.  That said the number of mappings
per region should never exceed the maximum number of possible dimms in
the system.  If the current number turns out to not be enough then the
"mappings" attribute clarifies how many there are supposed to be. "32
should be enough for anybody...".

Cc: Neil Brown <neilb@suse.de>
Cc: <linux-acpi@vger.kernel.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

* Implement the device-model infrastructure for loading modules and
  attaching drivers to nvdimm devices.  This is a simple association of a
  nd-device-type number with a driver that has a bitmask of supported
  device types.  To facilitate userspace bind/unbind operations 'modalias'
  and 'devtype', that also appear in the uevent, are added as generic
  sysfs attributes for all nvdimm devices.  The reason for the device-type
  number is to support sub-types within a given parent devtype, be it a
  vendor-specific sub-type or otherwise.

* The first consumer of this infrastructure is the driver
  for dimm devices.  It simply uses control messages to retrieve and
  store the configuration-data image (label set) from each dimm.

Note: nd_device_register() arranges for asynchronous registration of
      nvdimm bus devices by default.

Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Neil Brown <neilb@suse.de>
Acked-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Most discovery/configuration of the nvdimm-subsystem is done via sysfs
attributes.  However, some nvdimm_bus instances, particularly the
ACPI.NFIT bus, define a small set of messages that can be passed to the
platform.  For convenience we derive the initial libnvdimm-ioctl command
formats directly from the NFIT DSM Interface Example formats.

    ND_CMD_SMART: media health and diagnostics
    ND_CMD_GET_CONFIG_SIZE: size of the label space
    ND_CMD_GET_CONFIG_DATA: read label space
    ND_CMD_SET_CONFIG_DATA: write label space
    ND_CMD_VENDOR: vendor-specific command passthrough
    ND_CMD_ARS_CAP: report address-range-scrubbing capabilities
    ND_CMD_ARS_START: initiate scrubbing
    ND_CMD_ARS_STATUS: report on scrubbing state
    ND_CMD_SMART_THRESHOLD: configure alarm thresholds for smart events

If a platform later defines different commands than this set it is
straightforward to extend support to those formats.

Most of the commands target a specific dimm.  However, the
address-range-scrubbing commands target the bus.  The 'commands'
attribute in sysfs of an nvdimm_bus, or nvdimm, enumerate the supported
commands for that object.

Cc: <linux-acpi@vger.kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Enable nvdimm devices to be registered on a nvdimm_bus.  The kernel
assigned device id for nvdimm devicesis dynamic.  If userspace needs a
more static identifier it should consult a provider-specific attribute.
In the case where NFIT is the provider, the 'nmemX/nfit/handle' or
'nmemX/nfit/serial' attributes may be used for this purpose.

Cc: Neil Brown <neilb@suse.de>
Cc: <linux-acpi@vger.kernel.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The control device for a nvdimm_bus is registered as an "nd" class
device.  The expectation is that there will usually only be one "nd" bus
registered under /sys/class/nd.  However, we allow for the possibility
of multiple buses and they will listed in discovery order as
ndctl0...ndctlN.  This character device hosts the ioctl for passing
control messages.  The initial command set has a 1:1 correlation with
the commands listed in the by the "NFIT DSM Example" document [1], but
this scheme is extensible to future command sets.

Note, nd_ioctl() and the backing ->ndctl() implementation are defined in
a subsequent patch.  This is simply the initial registrations and sysfs
attributes.

[1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf

Cc: Neil Brown <neilb@suse.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: <linux-acpi@vger.kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

A struct nvdimm_bus is the anchor device for registering nvdimm
resources and interfaces, for example, a character control device,
nvdimm devices, and I/O region devices.  The ACPI NFIT (NVDIMM Firmware
Interface Table) is one possible platform description for such
non-volatile memory resources in a system.  The nfit.ko driver attaches
to the "ACPI0012" device that indicates the presence of the NFIT and
parses the table to register a struct nvdimm_bus instance.

Cc: <linux-acpi@vger.kernel.org>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>