Change and add some variable names, adjust some associated comments for
clarity. Correct some misleading comments.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi_end_request() is called multiple times from scsi_io_completion() which
branches on its bool returned value. Add comment before the static
definition of scsi_end_request() about the meaning of that return.
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

target_find_device is no longer used, so remove it.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch based on Xiubo's patches adds 2 tcmu attr to block and reset the
netlink interface. It's used during userspace daemon reinitialization after
the daemon has crashed while there is outstanding nl requests. The daemon
can block the nl interface, kill outstanding requests in the kernel and
then reopen the netlink socket and unblock it to allow new requests.

[mkp: typo]
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some misc cleanup of the nl rework patches.

1. Fix space instead of tabs use and extra newline

2. Drop initializing variables to 0 when not needed

3. Just pass the skb_buff and msg_header pointers to
   tcmu_netlink_event_send.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Just return EBUSY if a nl request comes in while processing one. The upper
layers do not support sending multiple create/remove requests at the same
time (you cannot have a create and remove at the same time or do multiple
creates or removes at the same time) and doing a reconfig while a
create/remove is still executing does not make sense.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The next patch is going to fix the hung nl command issue so this adds a
list of outstanding nl commands that we can later abort when the daemon is
restarted.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When this code changed, this was never cleaned up.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Tested-by: NXiubo Li <xiubli@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The get_seconds() function suffers from a possible overflow in 2038 or
2106, as well as jitter due to settimeofday or leap second updates, and is
deprecated.

As we are interested in elapsed time only, using ktime_get_seconds() to
read the CLOCK_MONOTONIC timebase is ideal here. This also lets us remove
the hack that tries to deal with get_seconds() going slightly backwards,
which cannot happen with montonic timestamps.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The get_seconds() helper returns an 'unsigned long' value, which can
overflow on 32-bit architectures. Since the interface we pass it into
already uses a 64-bit type, we can just use ktime_get_real_seconds()
instead.

While we generally prefer local timestamps in CLOCK_MONOTONIC format
(ktime_get_seconds), this keeps using the CLOCK_REALTIME version in order
to maintain compatibility with existing code.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

get_seconds() can overflow on 32-bit architectures and is deprecated
because of that. The use in the aacraid driver has the same problem due to
a limited firmware interface, it also overflows in the year 2106.

This changes all calls to get_seconds() to the non-deprecated
ktime_get_real_seconds(), which unfortunately doesn't solve that problem
but gets rid of one user of the deprecated interface.

[mkp: checkpatch]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a distinct
type.

Ref-> commit 1c8f4220 ("mm: change return type to vm_fault_t")

Previously, VM_FAULT_NOPAGE was returned without verifying return value of
vm_insert_pfn. The new inline vmf_insert_pfn() will address this issue by
returning correct VM_FAULT_* type from fault handler.
Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use the readl() kernel function to read all index registers. For ARM
systems, this function includes a read memory barrier that eliminates ci/pi
corruption.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Tested-by: NShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for these new device IDs:

  Advantech MIC-8312BridgeB
  INSPUR PM8204-2GB
  INSPUR PM8204-4GB
  INSPUR PM8222-SHBA
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Detect rare error cases for synchronous requests down the RAID path.

Also retry INQUIRY of VPD page 0 sent to an HBA drive if the command failed
due to an abort.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Decrement the active thread count after the synchronous request was
submitted to the controller but before the driver blocks to wait for the
request to complete.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Avoids that warnings about the kernel headers appear when building with
W=1. Remove useless "@Returns - Nothing" clauses. Change "@Return - " into
"Return: ".
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Split _base_reset_handler(), mpt3sas_scsih_reset_handler() and mpt3sas_ctl_reset_handler()

Split each of these functions in three functions - one function per reset
phase. This patch does not change any functionality but makes the code
easier to read.

Note: it is much easier to review the git diff -w output after having
applied this patch than by reviewing the patch itself.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since ioc->shost_recovery is set after ioc->reset_in_progress_mutex is
obtained, if concurrent resets are issued there is a short time during
which ioc->reset_in_progress_mutex is locked and ioc->shost_recovery ==
0. Avoid that this can cause trouble by unconditionally locking
ioc->shost_recovery.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch avoids that smatch complains about a double unlock on
ioc->transport_cmds.mutex.

Fixes: 651a0136 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: stable@vger.kernel.org
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Make _base_build_nvme_prp() easier to read by introducing a structure
to access NVMe command fields.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch avoids that gcc complains about switch/case fall-through
when building with W=1.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Modify the indentation such that smatch no longer complains about
inconsistent indenting.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 2623c7a5 ("libata: add refcounting to ata_host") v4.17+ introduced
refcounting to ata_host and will increase or decrease the refcount when
adding or deleting transport ATA port.

Now the ata host for libsas is embedded in domain_device, and the ->kref
member is not initialized. Afer we add ata transport class, ata_host_get()
will be called when adding transport ATA port and a warning will be
triggered as below:

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 2 PID: 103 at
lib/refcount.c:153 refcount_inc+0x40/0x48 ......  Call trace:
 refcount_inc+0x40/0x48
 ata_host_get+0x10/0x18
 ata_tport_add+0x40/0x120
 ata_sas_tport_add+0xc/0x14
 sas_ata_init+0x7c/0xc8
 sas_discover_domain+0x380/0x53c
 process_one_work+0x12c/0x288
 worker_thread+0x58/0x3f0
 kthread+0xfc/0x128
 ret_from_fork+0x10/0x18

And also when removing transport ATA port ata_host_put() will be called and
another similar warning will be triggered. If the refcount decreased to
zero, the ata host will be freed. But this ata host is only part of
domain_device, it cannot be freed directly.

So we have to change this embedded static ata host to a dynamically
allocated ata host and initialize the ->kref member. To use ata_host_get()
and ata_host_put() in libsas, we need to move the declaration of these
functions to the public libata.h and export them.

Fixes: b6240a4d ("scsi: libsas: add transport class for ATA devices")
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Taras Kondratiuk <takondra@cisco.com>
CC: Tejun Heo <tj@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With its one user gone, remove the library code.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The sbitmap and the percpu_ida perform essentially the same task,
allocating tags for commands.  The sbitmap outperforms the percpu_ida as
documented here: https://lkml.org/lkml/2014/4/22/553

The sbitmap interface is a little harder to use, but being able to remove
the percpu_ida code and getting better performance justifies the additional
complexity.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>	# f_tcm
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Introduce target_free_tag() and convert all drivers to use it.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ufshcd_dump_regs should use memcpy_fromio to read host registers
instead of directly accessing using memcpy.  The same function is
utilized in ufs-qcom.

Elminite compilation warning
drivers/scsi/ufs/ufshcd.c:356:9: warning: incorrect type in argument 6 (different address spaces)
drivers/scsi/ufs/ufshcd.c:356:9:    expected void const *buf
drivers/scsi/ufs/ufshcd.c:356:9:    got void [noderef] <asn:2>*mmio_base
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

commit a45b599a ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") changed the call to alloc_pages to always use
__GFP_ZERO.  Just above that, though, there was this:

       if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
               gfp_mask |= __GFP_ZERO;

And there's only one user of the gfp_mask.  Just or in the __GFP_ZERO
flag at the top of the function and be done with it.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In commit d2ba5675 ("[SCSI] qla2xxx: Disable local-interrupts while
polling for RISC status.") added a local_irq_disable() before invoking the
->intr_handler callback. The function, which was used in this callback, did
not disable interrupts while acquiring the spin_lock so a deadlock was
possible and this change was one possible solution.

The function in question was qla2300_intr_handler() and is using
spin_lock_irqsave() since commit 43fac4d9 ("[SCSI] qla2xxx: Resolve a
performance issue in interrupt").  I checked all other ->intr_handler
callbacks and all of them use the irqsave variant so it is safe to remove
the local_irq_save() block now.

Cc: qla2xxx-upstream@qlogic.com
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This will make subsequent refactoring easier to handle.

Note: this patch is nowhere checkpatch clean.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When ioremap_nocache fails, the lack of error-handling code may cause
unexpected results.

This patch adds error-handling code after calling ioremap_nocache.
Signed-off-by: NZhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since commit 312d3e56 ("[SCSI] libsas: remove ata_port.lock management
duties from lldds") the sas_ata_qc_issue() function unlocks the
ata_port.lock and disables interrupts before doing so.  That lock is always
taken with disabled interrupts so at this point, the interrupts are already
disabled. There is no need to disable the interrupts before the unlock
operation because they are already disabled.  Restoring the interrupt state
later does not change anything because they were disabled and remain
disabled. Therefore remove the operations which do not change the
behaviour.

Fixes: 312d3e56 ("[SCSI] libsas: remove ata_port.lock management duties from lldds")
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds formatting error overlay 0x41 to improve debug
capabilities.
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update CFG_1US_TIMER_TRSH and CON_CFG_DRIVER settings.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The init is missed for hisi_sas_phy spinlock, so add it.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently the driver spends much time allocating and freeing the slot DMA
buffer for command delivery/completion. To boost the performance,
pre-allocate the buffers for all IPTT. The downside of this approach is
that we are reallocating all buffer memory upfront, so hog memory which we
may not need.

However, the current method - DMA buffer pool - also caches all buffers and
does not free them until the pool is destroyed, so is not exactly efficient
either.

On top of this, since the slot DMA buffer is slightly bigger than a 4K
page, we need to allocate 2x4K pages per buffer (for 4K page kernel), which
is quite wasteful. For 64K page size this is not such an issue.

So, for the 4K page case, in order to make memory usage more efficient,
pre-allocating larger blocks of DMA memory for the buffers can be more
efficient.

To make DMA memory usage most efficient, we would choose a single
contiguous DMA memory block, but this could use up all the DMA memory in
the system (when CMA enabled and no IOMMU), or we may just not be able to
allocate a DMA buffer large enough when no CMA or IOMMU.

To decide the block size we use the LCM (least common multiple) of the
buffer size and the page size. We roundup(64) to ensure the LCM is not too
large, even though a little memory may be wasted per block.

So, with this, the total memory requirement is about is about 17MB for 4096
max IPTT.

Previously (for 4K pages case), it would be 32MB (for all slots
allocated).

With this change, the relative increase of IOPS for bs=4K read when
PAGE_SIZE=4K and PAGE_SIZE=64K is as follows:
    IODEPTH     4K PAGE_SIZE      64K PAGE_SIZE
    32          56%               47%
    64          53%               44%
    128         64%               43%
    256         67%               45%
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In host reset, we use TMF or soft-reset to re-init device, and if success,
we will release all LLDD resources of this device. If the init fails -
maybe because the device was removed or link has not come up - then do not
release the LLDD resources, but rather rely on SCSI EH to handle the
timeout for these resources later on.

But if clear nexus ha calls host reset, which is the last effort of SCSI
EH, we should release all LLDD remain resources. Because SCSI EH will
release all tasks after clear nexus ha.

Before release, we do I_T nexus reset to try to clear target remain IOs.
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>