Define a non-empty struct kvm_fpu.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NSanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull GPIO fixes from Linus Walleij:
 - An OMAP fix that makes ethernet work again.
 - Fix for build problem when building the MCP23S08 driver as module.
 - IRQ conflicts in the Langwell driver.
 - Fix IRQ coherency issues in the MXS driver.
 - Return correct errorcode on errorpath when removing GPIO chips.

* tag 'gpio-fixes-v3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Don't override the error code in probe error handling
  gpio: mxs: Use set and clear capabilities of the gpio controller
  gpio-langwell: fix irq conflicts when DT is not used
  gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m
  gpio/omap: ensure gpio context is initialised

Pull PCI updates from Bjorn Helgaas:
 "Here are some more fixes for v3.10.  The Moorestown update broke Intel
  Medfield devices, so I reverted it.  The acpiphp change fixes a
  regression: we broke hotplug notifications to host bridges when we
  split acpiphp into the host-bridge related part and the
  endpoint-related part.

  Moorestown
      Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
  Hotplug
      PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check"

* tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
  PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check

Pull input updates from Dmitry Torokhov:
 "A few fixups to Wacom and eGalax touchscreen driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add an eraser to DTH2242/DTK2241
  Input: wacom - add a few new styli for Cintiq series
  Input: wacom - add three new display tablets
  Input: egalax_ts - ABS_MT_POSITION_Y not reported well

Pull tty/serial fixes from Greg Kroah-Hartman:
 "Here are some tty / serial driver fixes for 3.10-rc2.

  Nothing huge, although the rocket driver fix looks large, it's just
  moving the code around to fix the reported build issues in it.  Other
  than that, this has the fix for the of-reported lockdep warning from
  the vt layer, as well as some other needed bugfixes.

  All of these have been in linux-next for a while"

* tag 'tty-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: mxser: Fix build warning introduced by dfc7b837 (Re: linux-next: build warning after merge of the tty.current tree)
  tty: mxser: fix usage of opmode_ioaddr
  serial: 8250_dw: add ACPI ID for Intel BayTrail
  TTY: Fix tty miss restart after we turn off flow-control
  tty/vt: Fix vc_deallocate() lock order
  TTY: ehv_bytechan: add missing platform_driver_unregister() when module exit
  TTY: rocket, fix more no-PCI warnings
  serial: mcf: missing uart_unregister_driver() on error in mcf_init()
  tty: serial: mpc5xxx: fix error handing in mpc52xx_uart_init()
  serial: samsung: add missing platform_driver_unregister() when module exit
  serial: pl011: protect attribute read from NULL platform data struct
  tty: nwpserial: Pass correct pointer to free_irq()
  serial: 8250_dw: Add valid clk pointer check

Pull staging driver fixes from Greg Kroah-Hartman:
 "Here are some staging tree driver fixes for 3.10-rc2

  The drivers/iio/ changes are here as they are still tied into
  drivers/staging/iio/.

  Nothing major, just a number of small bugfixes, and a larger
  documentation update for the ramster code."

* tag 'staging-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
  iio: exynos_adc: fix wrong structure extration in suspend and resume
  iio:common:st: added disable function after read info raw data
  iio: dac: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m
  staging:iio:light:tsl2x7x: fix the error handling in tsl2x7x_probe()
  staging/iio/mxs-lradc: fix preenable for multiple buffers
  staging: imx-drm: imx-tve: Check the return value of 'regulator_enable()'
  staging: video: imx: Select VIDEOMODE_HELPERS for parallel display
  staging: ramster: add how-to document
  staging: dwc2: Fix dma-enabled platform devices using a default dma_mask
  staging: vt6656: [bug] Fix missing spin lock in iwctl_siwpower.
  staging: Swap zram and zsmalloc in Kconfig
  staging: android: logger: use kuid_t instead of uid_t
  staging: zcache: Fix incorrect module_param_array types
  staging/solo6x10: depend on CONFIG_FONTS
  staging/drm: imx: add missing dependencies
  staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning
  staging: sep: fix driver build and kconfig
  staging: nvec: cleanup childs on remove
  staging: nvec: implement unregistering of notifiers
  ...

Merge tag 'driver-core-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg Kroah-Hartman:
 "Here are 3 tiny driver core fixes for 3.10-rc2.

  A needed symbol export, a change to make it easier to track down
  offending sysfs files with incorrect attributes, and a klist bugfix.

  All have been in linux-next for a while"

* tag 'driver-core-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  klist: del waiter from klist_remove_waiters before wakeup waitting process
  driver core: print sysfs attribute name when warning about bogus permissions
  driver core: export subsys_virtual_register

Pull char/misc driver fixes from Greg Kroah-Hartman:
 "Here are some small char/misc driver fixes for 3.10-rc2.

  Nothing major here, just a number of fixes for things that people have
  reported, and a MAINTAINERS update for the recent changes for the
  hyperv files that went into 3.10-rc1."

* tag 'char-misc-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ttyprintk: Fix NULL pointer deref by setting tty_port ops after initializing port
  uio: UIO_DMEM_GENIRQ should depend on HAS_DMA
  MAINTAINERS: update Hyper-V file list
  mei: bus: Reset event_cb when disabling a device
  Drivers: hv: Fix a bug in get_vp_index()
  mei: fix out of array access to me clients array
  Char: lp, protect LPGETSTATUS with port_mutex
  dummy-irq: require the user to specify an IRQ number

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2

  The majority of these are USB gadget fixes, but they are all small.
  Other than that, some USB host controller fixes, and USB serial driver
  fixes for problems reported with them.

  Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
  to be almost impossible to get right for all of the different
  platforms these days."

* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
  USB: cxacru: potential underflow in cxacru_cm_get_array()
  USB: ftdi_sio: Add support for Newport CONEX motor drivers
  USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
  usb: ohci: fix goto wrong tag in err case
  usb: isp1760-if: fix memleak when platform_get_resource fail
  usb: ehci-s5p: fix memleak when fallback to pdata
  USB: serial: clean up chars_in_buffer
  USB: ti_usb_3410_5052: fix chars_in_buffer overhead
  USB: io_ti: fix chars_in_buffer overhead
  USB: ftdi_sio: fix chars_in_buffer overhead
  USB: ftdi_sio: clean up get_modem_status
  USB: serial: add generic wait_until_sent implementation
  USB: serial: add wait_until_sent operation
  USB: set device dma_mask without reference to global data
  USB: Blacklisted Cinterion's PLxx WWAN Interface
  usb: option: Add Telewell TW-LTE 4G
  USB: EHCI: remove bogus #error
  USB: reset resume quirk needed by a hub
  USB: usb-stor: realtek_cr: Fix compile error
  usb, chipidea: fix link error when USB_EHCI_HCD is a module
  ...

Pull kvm bugfixes from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock()
  KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API.
  KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry

Fix build error io vmw_vmci.ko when CONFIG_VMWARE_VMCI=m by chaning
iovec.o from lib-y to obj-y.

  ERROR: "memcpy_toiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined!
  ERROR: "memcpy_fromiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined!
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

plus send begin and end of express keys events for
Cintiq 13HD and DTH2242/DTK2241
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull AVR32 update from Hans-Christian Egtvedt:
 "wow, it has gone 10 releases since my last request :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: fix building warnings caused by redefinitions of HZ
  avr32: fix relocation check for signed 18-bit offset
  avr32: move NODES_SHIFT into Kconfig and delete numnodes.h

Pull MIPS update from Ralf Baechle:
 - Fix a build error if <linux/printk.h> is included without
   <linux/linkage.h> having been included before.
 - Cleanup and fix the damage done by the generic idle loop patch.
 - A kprobes fix that brings the MIPS code in line with what other
   architectures are for quite a while already.
 - Wire up the native getdents64(2) syscall for 64 bit - for some reason
   it was only for the compat ABIs.  This has been reported to cause an
   application issue.  This turned out bigger than I meant but the wait
   instruction support code was driving me nuts.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: N64: Wire getdents64(2)
  kprobes/mips: Fix to check double free of insn slot
  MIPS: Idle: Break r4k_wait into two functions and fix it.
  MIPS: Idle: Do address fiddlery in helper functions.
  MIPS: Idle: Consolidate all declarations in <asm/idle.h>.
  MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations.
  MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait.
  MIPS: Idle: Make call of function pointer readable.
  MIPS: Idle: Consistently reformat inline assembler.
  MIPS: Idle: cleaup SMTC idle hook as per Linux coding style.
  MIPS: Consolidate idle loop / WAIT instruction support in a single file.
  MIPS: clock.h: Remove declaration of cpu_wait.
  Add include dependencies to <linux/printk.h>.
  MIPS: Rewrite pfn_valid to work in modules, too.

Remove the compile-time warning for this config option, and instead
warn that it is experimental in the Kconfig text
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-3.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of IIO fixes for the 3.10 cycle.

The usual mixed bag of little fixes.

1) A fix for mxs-lradc having missed out on some global abi changes that and
   hence being unable to start up buffered output.
2) Clean up error handling in tsl2x7x
3) A build fix for some of the dac drivers when they have spi master support
   built in, but i2c support build as a module.
4) Add a missing disable after a oneshot capture to the st sensor core.
5) Exynos adc driver took a novel an incorrect route to get at its private
   data store.

The exynos_adc device structure was wrongly extracted from the dev*
correcting the same.

Using the regular conversion of
struct device* -> struct platform_device* -> struct exynos_adc* seems wrong.
Instead we should be doing
struct device* -> struct iio_dev* -> struct exynos_adc*
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NDenis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m:

drivers/built-in.o: In function `ad5064_i2c_write':
drivers/iio/dac/ad5064.c:608: undefined reference to `i2c_master_send'
drivers/built-in.o: In function `ad5064_i2c_register_driver':
drivers/iio/dac/ad5064.c:646: undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `ad5064_i2c_unregister_driver':
drivers/iio/dac/ad5064.c:651: undefined reference to `i2c_del_driver'
make: *** [vmlinux] Error 1

When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support.
Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m.

The real fix though is to break the driver apart into a SPI part, an I2C part
and a common part. But that's something for 3.11 while this is something for
3.10/stable.
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix to return -EINVAL in the i2c device found error handling
case instead of 0, as done elsewhere in this function.
And also correct the fail1 and fail2 lable to do the right thing.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This fixes 'preenable failed: -EINVAL' error when using this driver.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

As suggested by David Howells <dhowells@redhat.com>, use
asm-generic/param.h and uapi/asm-generic/param.h for AVR32.

It also fixes building warnings caused by redefinitions of HZ:
In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4,
                 from include/linux/timex.h:63,
                 from include/linux/jiffies.h:8,
                 from include/linux/ktime.h:25,
                 from include/linux/timer.h:5,
                 from include/linux/workqueue.h:8,
                 from include/linux/srcu.h:34,
                 from include/linux/notifier.h:15,
                 from include/linux/memory_hotplug.h:6,
                 from include/linux/mmzone.h:777,
                 from include/linux/gfp.h:4,
                 from arch/avr32/mm/init.c:10:
/ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined
In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4,
                 from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4,
                 from include/linux/timex.h:63,
                 from include/linux/jiffies.h:8,
                 from include/linux/ktime.h:25,
                 from include/linux/timer.h:5,
                 from include/linux/workqueue.h:8,
                 from include/linux/srcu.h:34,
                 from include/linux/notifier.h:15,
                 from include/linux/memory_hotplug.h:6,
                 from include/linux/mmzone.h:777,
                 from include/linux/gfp.h:4,
                 from arch/avr32/mm/init.c:10:
/ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>

tty: mxser: Fix build warning introduced by dfc7b837 (Re: linux-next: build warning after merge of the tty.current tree)

Fix build warning at mxser.c introduced by dfc7b837 (tty: mxser: fix
usage of opmode_ioaddr)
Signed-off-by: NMatwey V. Kornilov <matwey@sai.msu.ru>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

virt_to_page() is typically implemented as a macro containing a cast so
that it will accept both pointers and unsigned long without causing a
warning.

But MIPS virt_to_page() uses virt_to_phys which is a function so passing
an unsigned long will cause a warning:

    CC      mm/page_alloc.o
  mm/page_alloc.c: In function ‘free_reserved_area’:
  mm/page_alloc.c:5161:3: warning: passing argument 1 of ‘virt_to_phys’ makes pointer from integer without a cast [enabled by default]
  arch/mips/include/asm/io.h:119:100: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’

All others users of virt_to_page() in mm/ are passing a void *.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reported-by: NEunbong Song <eunb.song@samsung.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull mfd fixes from Samuel Ortiz:
 "This is the first batch of MFD fixes for 3.10.

  It's bigger than I would like, most of it is due to the big ab/db8500
  merge that went through during the 3.10 merge window.

  So we have:

   - Some build fixes for the tps65912 and ab8500 drivers.
   - A couple of build fixes for the the si476x driver with pre 4.3 gcc
     compilers.
   - A few runtime breakage fixes (probe failures or oopses) for the
     ab8500 and db8500 drivers.
   - Some sparse or regular gcc warning fixes for the si476x, ab8500 and
     cros_ec drivers."

* tag 'mfd-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: ab8500-sysctrl: Let sysctrl driver work without pdata
  mfd: db8500-prcmu: Update stored DSI PLL divider value
  mfd: ab8500-sysctrl: Always enable pm_power_off handler
  mfd: ab8500-core: Pass GPADC compatible string to MFD core
  mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal
  mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl
  mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource
  mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning
  mfd: ab8500-sysctrl: Set sysctrl_dev during probe
  mfd: ab8500-sysctrl: Fix sparse warning
  mfd: abx500-core: Fix sparse warning
  mfd: ab8500: Debugfs code depends on gpadc
  mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads
  mfd: cros_ec_spi: Use %z to format pointer differences
  mfd: si476x: Do not use binary constants
  mfd: tps65912: Select MFD_CORE

Pull virtio fixes from Rusty Russell:
 "A build fix and a uapi exposure fix.  The build fix is later than I
  liked, but my first version broke linux-next due to overzealous header
  clean."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: fix uapi header
  Hoist memcpy_fromiovec/memcpy_toiovec into lib/

As a relatively new ABI, N64 only had getdents syscall while other modern
architectures have getdents64.

This was noticed when Python 3.3 shifted to the latter one for aarch64.

[ralf@linux-mips.org: The history of getdents64 is a little complicated.
Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.]
added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213,
then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul
of the 64-bit syscall interface.  Now heritage free.] for 2.5.18 in 2002.]
Signed-off-by: NAron Xu <aron@debian.org>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5285/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix to check double free of insn_slot at arch_remove_kprobe
as other arches do.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Maneesh Soni <manesoni@cisco.com>
Cc: Victor Kamensky <kamensky@cisco.com>
Cc: linux-mips@linux-mips.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Patchwork: https://patchwork.linux-mips.org/patch/5293/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock().
  Memory slots should be acccessed from a SRCU read section.
- kvm_mips_map_page() now returns an error code to it's callers, instead of
  calling panic() if it cannot find a mapping for a particular gfn.
Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

local_irq_enable() may expand into very different code, so it rather should
stay in C.  Also this keeps the assembler code size constant which keeps
the rollback code simple.  So it's best to split r4k_wait into two parts,
one C and one assembler.

Finally add the local_irq_enable() to r4k_wait to ensure the WAIT
instruction in __r4k_wait() will work properly.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The generic idle loop has already disabled interrupts so this is redundant.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Without this, the

    WARN_ON_ONCE(irqs_disabled());

in the idle loop will be triggered.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Duplicate and has no business in this header file.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>