By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.

This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.

Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

In order to fetch the correct entry point with the ISA bit included, for
use by non-ELF boot loaders, parse the output of `objdump -f' for the
start address recorded in the kernel executable itself, rather than
using `nm' to get the value of the `kernel_entry' symbol.

Sign-extend the address retrieved if 32-bit, so that execution is
correctly started on 64-bit processors as well.  The tool always prints
the entry point using either 8 or 16 hexadecimal digits, matching the
address width (aka class) of the ELF file, even in the presence of
leading zeros.
Signed-off-by: NMaciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18912/Signed-off-by: NJames Hogan <jhogan@kernel.org>

Introduce support for the MIPS based Microsemi Ocelot SoCs.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Allan Nielsen <Allan.Nielsen@microsemi.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18858/
[jhogan@kernel.org: update ocelot_defconfig specification]
Signed-off-by: NJames Hogan <jhogan@kernel.org>

Expand the MIPS Makefile help text to list generic board names, generic
defconfigs, and legacy defconfigs which have been converted to generic
and are still usable.

Here's a snippet of the new "make ARCH=mips help" output:
  ...
  If you are targeting a system supported by generic kernels you may
  configure the kernel for a given architecture target like so:

  {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">

  Where BOARDS is some subset of the following:
    boston
    ni169445
    ranchu
    sead-3
    xilfpga

  Specifically the following generic default configurations are
  supported:

  32r1_defconfig           - Build generic kernel for MIPS32 r1
  32r1el_defconfig         - Build generic kernel for MIPS32 r1 little endian
  32r2_defconfig           - Build generic kernel for MIPS32 r2
  32r2el_defconfig         - Build generic kernel for MIPS32 r2 little endian
  32r6_defconfig           - Build generic kernel for MIPS32 r6
  32r6el_defconfig         - Build generic kernel for MIPS32 r6 little endian
  64r1_defconfig           - Build generic kernel for MIPS64 r1
  64r1el_defconfig         - Build generic kernel for MIPS64 r1 little endian
  64r2_defconfig           - Build generic kernel for MIPS64 r2
  64r2el_defconfig         - Build generic kernel for MIPS64 r2 little endian
  64r6_defconfig           - Build generic kernel for MIPS64 r6
  64r6el_defconfig         - Build generic kernel for MIPS64 r6 little endian
  micro32r2_defconfig      - Build generic kernel for microMIPS32 r2
  micro32r2el_defconfig    - Build generic kernel for microMIPS32 r2 little endian

  The following legacy default configurations have been converted to
  generic and can still be used:

  sead3_defconfig          - Build 32r2el_defconfig BOARDS=sead-3
  sead3micro_defconfig     - Build micro32r2el_defconfig BOARDS=sead-3
  xilfpga_defconfig        - Build 32r2el_defconfig BOARDS=xilfpga
  ...
Signed-off-by: NJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18598/

Define legacy defconfigs which have been converted to the generic
platform more programatically, so that they can be listed in the
Makefile help text and as a separate Makefile target without
duplication.
Signed-off-by: NJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18596/

This module registers crc32 and crc32c algorithms that use the
optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores.
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@mips.com>
Signed-off-by: NJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: linux-crypto@vger.kernel.org
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Patchwork: https://patchwork.linux-mips.org/patch/18601/
[jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers'
 suggestion, due to commit a208fa8f ("crypto: hash - annotate
 algorithms taking optional key") in v4.16-rc1]

Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of
directly encoding them with the _ASM_INSN* macros, and transparently
implement these instructions as assembler macros if the toolchain
doesn't support them natively, using the recently introduced assembler
macro helpers.

The old direct encodings were restricted to using the register $at, so
this allows the extra register moves to go away (saving a grand total of
24 bytes).
Signed-off-by: NJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17775/

vmlinuz is not built by default for platforms using
COMPRESSION_FNAME (e.g. Malta) due to an erroneous
check on ZBOOT
Signed-off-by: NDaniel Sabogal <dsabogalcc@gmail.com>
Reviewed-by: NJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18466/Signed-off-by: NJames Hogan <jhogan@kernel.org>

Use the generic platform code and remove arch/mips/xilfpga
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15847/
[jhogan@kernel.org: Update arch/mips/Makefile snippet and move to end]
Signed-off-by: NJames Hogan <jhogan@kernel.org>

The default system type should be a MIPS generic kernel. In order to
include some level of board support, select a 32r2el generic defconfig
by default. The alternative would be to use "generic_defconfig" but
rather unintuitvely that is a bare bones configuration with no platform
support so is not usable in practice.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14715/Signed-off-by: NJames Hogan <jhogan@kernel.org>

This will allow kdump dumps to work correclty with MIPS and
future DWARF unwinding of the stack to give accurate tracebacks.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16990/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Using generic_defconfig directly is unlikely to be what a user actually
wants to do - it doesn't specify any particular ISA revision & it
doesn't enable any board or driver support, resulting in a largely
useless kernel.

Prevent users from using it directly, printing a helpful message to
point them in the right direction if they attempt to.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16946/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Up until now when configuring a generic kernel all board config
fragments have been merged by default unless boards are explicitly
selected by the user specifying BOARDS=.

In many cases this is sub-optimal, since some boards don't make sense to
include in some kernels. For example the MIPS SEAD-3 development board
has only ever been used with 32 bit CPUs, so including support for the
SEAD-3 in a 64 bit kernel is wasteful.

This patch introduces support for specifying requirements in board
config fragments, using comments formatted like so:

  # require CONFIG_BLA=y

For example the SEAD-3 board could specify that it should only be merged
for 32 bit kernels using a requirement line like the following:

  # require CONFIG_32BIT=y

A new generic-board-config.sh script is introduced to handle selecting
the board config fragments to merge & calling merge_config.sh to merge
them. In order to allow requirements to check Kconfig symbols that are
implicitly selected, rather than explicitly specified by
generic_defconfig or one of the ISA config fragments, an intermediate
.config file is saved & used as a reference when checking requirements.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16943/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In preparation for splitting arch/mips/generic/vmlinux.its.S into
multiple files such that it doesn't become a conflict magnet as boards
are added, allow platforms to specify a list of image tree source files
which will be concatenated to form the final source used to build the
image tree.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16938/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The kernel contains a small amount of incomplete code aimed at
supporting old R6000 CPUs. This is:

  - Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000.

  - Broken, since there are glaring errors such as r6000_fpu.S moving
    the FCSR register to t1, then ignoring it & instead saving t0 into
    struct sigcontext...

  - A maintenance headache, since it's code that nobody can test which
    nevertheless imposes constraints on code which it shares with other
    machines.

Remove this incomplete & broken R6000 CPU support in order to clean up
and in preparation for changes which will no longer need to consider
dragging the pretense of R6000 support along with them.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16236/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When building a kernel for the microMIPS ISA, ensure that the ISA bit
(ie. bit 0) in the entry address is set. Otherwise we may include an
entry address in images which bootloaders will jump to as MIPS32 code.

I originally tried using "objdump -f" to obtain the entry address, which
works for microMIPS but it always outputs a 32 bit address for a 32 bit
ELF whilst nm will sign extend to 64 bit. That matters for systems where
we might want to run a MIPS32 kernel on a MIPS64 CPU & load it with a
MIPS64 bootloader, which would then jump to a non-canonical
(non-sign-extended) address.

This works in all cases as it only changes the behaviour for microMIPS
kernels, but isn't the prettiest solution. A possible alternative would
be to write a custom tool to just extract, sign extend & print the entry
point of an ELF executable. I'm open to feedback if that would be
preferred.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16950/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add "-modd-spreg" when compiling the kernel for mips32r6 target.

This makes sure the kernel builds properly even with toolchains that
use "-mno-odd-spreg" by default. This is the case with Android gcc.
Prior to this patch, kernel builds using gcc for Android failed with
following error messages, if target architecture is set to mips32r6:

arch/mips/kernel/r4k_switch.S: Assembler messages:
.../r4k_switch.S:210: Error: float register should be even, was 1
.../r4k_switch.S:212: Error: float register should be even, was 3
.../r4k_switch.S:214: Error: float register should be even, was 5
.../r4k_switch.S:216: Error: float register should be even, was 7
.../r4k_switch.S:218: Error: float register should be even, was 9
.../r4k_switch.S:220: Error: float register should be even, was 11
.../r4k_switch.S:222: Error: float register should be even, was 13
.../r4k_switch.S:224: Error: float register should be even, was 15
.../r4k_switch.S:226: Error: float register should be even, was 17
.../r4k_switch.S:228: Error: float register should be even, was 19
.../r4k_switch.S:230: Error: float register should be even, was 21
.../r4k_switch.S:232: Error: float register should be even, was 23
.../r4k_switch.S:234: Error: float register should be even, was 25
.../r4k_switch.S:236: Error: float register should be even, was 27
.../r4k_switch.S:238: Error: float register should be even, was 29
.../r4k_switch.S:240: Error: float register should be even, was 31
make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1
Signed-off-by: NMiodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: NGoran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16509/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When specifying a generic defconfig target with O=... option set, make
is invoked in the output location before a target makefile wrapper is
created. Ensure that the correct makefile is used by specifying the
kernel source makefile during make invocation.

This fixes the either of the following errors:

$ make sead3_defoncifg ARCH=mips O=test
make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test'
make[2]: *** No rule to make target '32r2el_defconfig'.  Stop.
arch/mips/Makefile:506: recipe for target 'sead3_defconfig' failed
make[1]: *** [sead3_defconfig] Error 2
make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test'
Makefile:152: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

$ make 32r2el_defconfig ARCH=mips O=test
make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test'
Using ../arch/mips/configs/generic_defconfig as base
Merging ../arch/mips/configs/generic/32r2.config
Merging ../arch/mips/configs/generic/el.config
Merging ../arch/mips/configs/generic/board-sead-3.config
!
! merged configuration written to .config (needs make)
!
make[2]: *** No rule to make target 'olddefconfig'.  Stop.
arch/mips/Makefile:489: recipe for target '32r2el_defconfig' failed
make[1]: *** [32r2el_defconfig] Error 2
make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test'
Makefile:152: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

Fixes: eed0eabd ('MIPS: generic: Introduce generic DT-based board support')
Fixes: 3f5f0a44 ('MIPS: generic: Convert SEAD-3 to a generic board')
Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15464/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Disable stack checking on MIPS kernels.  Some distribution toolchains
might pass the -fstack-check option to gcc.  This results in a
store-doubleword instruction being emitted at the top of all
functions that checks the available stack space.  E.g.,

  a80000000001d740 <per_cpu_init>:
  a80000000001d740:       ffa0bfc0        sd      zero,-16448(sp)
  a80000000001d744:       2405ffc9        li      a1,-55
  a80000000001d748:       67bdffc0        daddiu  sp,sp,-64

Generally, this is undesirable, and especially on the SGI IP27
platform, it will trigger a NULL pointer dereference in
'_raw_spin_lock_irq' during early init.
Signed-off-by: NJoshua Kinard <kumba@gentoo.org>
Suggested-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15132/Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

A clean mips64 build produces no output except for two lines:

  Checking missing-syscalls for N32
  Checking missing-syscalls for O32

On other architectures, there is no output at all, so let's do the
same here for the sake of build testing. The 'kecho' macro is used
to print the message on a normal build but skip it with 'make -s'.

Fixes: e48ce6b8 ("[MIPS] Simplify missing-syscalls for N32 and O32")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15040/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When relocatable support for MIPS was merged, there was no support for
an architecture to add a postlink step for vmlinux. This meant that only
invoking a target within the boot directory, such as uImage, caused the
relocations to be inserted into vmlinux. Building just the vmlinux
target would result in a relocatable kernel with no relocation
information present.

Commit fbe6e37d ("kbuild: add arch specific post-link Makefile")
recified this situation, so MIPS can now define a postlink step to add
relocation information into vmlinux, and remove the additional steps
tacked onto boot targets.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Tested-by: NSteven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14554/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

uzImage.bin is vmlinuz.bin wrapped in a legacy U-Boot image. Since
the extraction code is inside the image, it does not depend on the
boot loader to extract the kernel.
Signed-off-by: NMaarten ter Huurne <maarten@treewalker.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14473/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Changes introduced to arch/mips/Makefile for the generic kernel resulted
in build errors when making a compressed image if platform-y has multiple
values, like this:

make[2]: *** No rule to make target `alchemy/'.
make[1]: *** [vmlinuz] Error 2
make[1]: Target `_all' not remade because of errors.
make: *** [sub-make] Error 2
make: Target `_all' not remade because of errors.

Fix this by quoting $(platform-y) as it is passed to the Makefile in
arch/mips/boot/compressed/Makefile
Reported-by: Nkernelci.org bot <bot@kernelci.org>
Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.logSigned-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14405/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.

Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14354/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.

Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.

Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14353/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add support for generating kernel images in the Flattened Image Tree
(.itb) format as supported by U-Boot. This format is essentially a
Flattened Device Tree binary containing images (kernels, DTBs, ramdisks)
and configurations which link those images together. The big advantages
of FIT images over the uImage format are:

  - We can include FDTs in the kernel image in a way that the bootloader
    can extract it & manipulate it before providing it to the kernel.
    Thus we can ship FDTs as part of the kernel giving us the advantages
    of being able to develop & maintain the DT within the kernel tree,
    but also have the benefits of the bootloader being able to
    manipulate the FDT. Example uses for this would be to inject the
    kernel command line into the chosen node, or to fill in the correct
    memory size.

  - We can include multiple configurations in a single kernel image.
    This means that a single FIT image can, given appropriate
    bootloaders, be booted on different boards with the bootloader
    selecting an appropriate configuration & providing the correct FDT
    to the kernel.

  - We can support a multitude of hashes over the data.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14352/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit c1a0e9bc ("MIPS: Allow compact branch policy to be changed")
added Kconfig entries allowing for the compact branch policy used by the
compiler for MIPSr6 kernels to be specified. This can be useful for
debugging, particularly in systems where compact branches have recently
been introduced.

Unfortunately mainline gcc 5.x supports MIPSr6 but not the
-mcompact-branches compiler flag, leading to MIPSr6 kernels failing to
build with gcc 5.x with errors such as:

  mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal'
  make[2]: *** [kernel/bounds.s] Error 1

Fixing this by hiding the Kconfig entry behind another seems to be more
hassle than it's worth, as MIPSr6 & compact branches have been around
for a while now and if policy does need to be set for debug it can be
done easily enough with KCFLAGS. Therefore remove the compact branch
policy Kconfig entries & their handling in the Makefile.

This reverts commit c1a0e9bc ("MIPS: Allow compact branch policy to
be changed").
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: c1a0e9bc ("MIPS: Allow compact branch policy to be changed")
Cc: stable <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14241/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The VZ guest register & TLB access macros introduced in commit "MIPS:
Add guest CP0 accessors" use VZ ASE specific instructions that aren't
understood by versions of binutils prior to 2.24.

Add a check for whether the toolchain supports the -mvirt option,
similar to the MSA toolchain check, and implement the accessors using
.word if not.

Due to difficulty in converting compiler specified registers (e.g. "$3")
to usable numbers (e.g. "3") in inline asm, we need to copy to/from a
temporary register, namely the assembler temporary (at/$1), and specify
guest CP0 registers numerically in the gc0 macros.

Fixes: 7eb91118 ("MIPS: Add guest CP0 accessors")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-next@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13255/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When CONFIG_RELOCATABLE is enabled (added in later patch) add
--emit-relocs to vmlinux LDFLAGS so that fully linked vmlinux contains
relocation information.

Run the previously added relocs tool to fill in the .data.relocs section
of vmlinux with a table of relocations. The relocs tool will also remove
(mark as 0 length) the relocation sections added to vmlinux.

When vmlinux is passed to the boot makefile for conversion into a boot
image the now empty relocation sections will be removed and the
populated relocation table will be included in the binary image.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12983/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Build the relocs tool as part of the kbuild
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12980/
Patchwork: https://patchwork.linux-mips.org/patch/13242/
Patchwork: https://patchwork.linux-mips.org/patch/13233/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise
we use -march=mips64r2, this can slightly improve performance. Besides,
arch/mips/loongson64/Platform is a better location rather than arch/
mips/Makefile.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12161/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When debugging it can be helpful to change the policy for compiler use
of MIPSr6 compact branches, in order to rule out or home in on their
involvement in bugs. Allow the GCC -mcompact-branches= flag to be set
via Kconfig under the "Kernel hacking" menu.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11178/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pass 1 parts had a number of significant erratas and were only available
in small numbers and under NDA.  Full support also required the use of a
special toolchain that kept branches properly aligned.  These workarounds
were never upstreamed and the only toolchain known to have them is
Montavista's GCC 3.0-based toolchain which completly obsoleted if not
useless these days.

So now that automated testing has tripped over the user of the
-msb1-pass1-workarounds option, rather than fixing it remove support for
pass 1 parts.

Probably nobody will notice.  I seem to own the last know pass 1 board
and I haven't noticed another one in the wild in the past decade, at
least.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse
command line (and build fails with: /bin/sh: syntax error:
unexpected "(") since make tries to expand starting with the dollar
sign with a make variable. Prevent that by using double dollar sign.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10025/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 32098ec7 ("MIPS: Makefile: Move the ASEs checks after
setting the core's CFLAGS") re-arranged the MIPS ASE detection code
and also added the current cflags to the detection logic. However,
this introduced a few bugs. First of all, the mips-cflags should not
be quoted since that ends up being passed as a string to subsequent
commands leading to broken detection from the cc-option-* tools.
Moreover, in order to avoid duplicating the cflags-y because of how
cc-option works, we rework the logic so we pass only those cflags which
are needed by the selected ASE. Finally, fix some typos resulting in MSA
not being detected correctly.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Fixes: Commit 32098ec7 ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS")
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9661/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
"--include-dir=$(srctree)" becomes effective when Make enters into
sub Makefiles.

To use relative path in any places, this commit moves the option
above the "sub-make" target.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add the dtbs_install Makefile target to install the dtb files into
$INSTALL_DTBS_PATH.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Tested-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8836/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move the MIPS device-trees into the appropriate vendor sub-directories.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Tested-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8835/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Allow more compression algorithms as well as uncompressed uImage.bin
to be generated. An uncompressed image might be useful to rule out
problems in the decompression code in the bootloader or even speed
up the boot process at the expense of a bigger uImage file.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9271/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We need to check the ASEs support against the core's CFLAGS instead
of depending to the default -march option from the toolchain.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9180/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>