According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is
supported only if dmfs_ipoib bit is set.

If it isn't set we want to ensure allocating NET_IF QPs fail. We do so
by filling out the allocation bitmap. By thus, the NET_IF QPs allocating
function won't find any free QP and will fail.

Fixes: c1c98501 ('IB/mlx4: Add support for steerable IB UD QPs')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Report the correct speed in the port attributes when using a 56Gbps
ethernet link.  Without this change the field is incorrectly set to 10.

Fixes: a9c766bb ('IB/mlx4: Fix info returned when querying IBoE ports')
Fixes: 2e96691c ('IB: Use central enum for speed instead of hard-coded values')
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use INT_MAX since this is the max value the attribute can hold, though
hardware capability is unlimited.

Fixes: 225c7b1f ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In MLX qp packets, the LRH (built by the driver) has both a VL field
and an SL field. When building a QP1 packet, the VL field should
reflect the SLtoVL mapping and not arbitrarily contain zero (as is
done now). This bug causes credit problems in IB switches at
high rates of QP1 packets.

The fix is to cache the SL to VL mapping in the driver, and look up
the VL mapped to the SL provided in the send request when sending
QP1 packets.

For FW versions which support generating a port_management_config_change
event with subtype sl-to-vl-table-change, the driver uses that event
to update its sl-to-vl mapping cache.  Otherwise, the driver snoops
incoming SMP mads to update the cache.

There remains the case where the FW is running in secure-host mode
(so no QP0 packets are delivered to the driver), and the FW does not
generate the sl2vl mapping change event. To support this case, the
driver updates (via querying the FW) its sl2vl mapping cache when
running in secure-host mode when it receives either a Port Up event
or a client-reregister event (where the port is still up, but there
may have been an opensm failover).
OpenSM modifies the sl2vl mapping before Port Up and Client-reregister
events occur, so if there is a mapping change the driver's cache will
be properly updated.

Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves mlx4 vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx4) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces
deprecated create_singlethread_workqueue(). This is the identity
conversion.

The workqueue "wq" queues work items &dm[i]->work, &ew->work.
It has been identity converted.

WQ_MEM_RECLAIM has been set to ensure forward progress under
memory pressure.
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add validation check that all set fields in flow specification
are supported by vendor.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of exposing ib_get_dma_mr to ULPs and letting them use it more or
less unchecked, this moves the capability of creating a global rkey into
the RDMA core, where it can be easily audited.  It also prints a warning
everytime this feature is used as well.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify the mlx4_ib_diag_counters() to avoid the following error in the
hypervisor when the slave tries to query the hardware counters in SR-IOV
mode.

mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1

Fixes: 3f85f2aa ("IB/mlx4: Add diagnostic hardware counters")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Expose IB diagnostic hardware counters.
The counters count IB events and are applicable for IB and RoCE.

The counters can be divided into two groups, per device and per port.
Device counters are always exposed.
Port counters are exposed only if the firmware supports per port counters.

rq_num_dup and sq_num_to are only exposed if we have firmware support
for them, if we do, we expose them per device and per port.
rq_num_udsdprd and num_cqovf are device only counters.

rq - denotes responder.
sq - denotes requester.

|-----------------------|---------------------------------------|
|	Name		|	Description			|
|-----------------------|---------------------------------------|
|rq_num_lle		| Number of local length errors		|
|-----------------------|---------------------------------------|
|sq_num_lle		| number of local length errors		|
|-----------------------|---------------------------------------|
|rq_num_lqpoe		| Number of local QP operation errors	|
|-----------------------|---------------------------------------|
|sq_num_lqpoe		| Number of local QP operation errors	|
|-----------------------|---------------------------------------|
|rq_num_lpe		| Number of local protection errors	|
|-----------------------|---------------------------------------|
|sq_num_lpe		| Number of local protection errors	|
|-----------------------|---------------------------------------|
|rq_num_wrfe		| Number of CQEs with error		|
|-----------------------|---------------------------------------|
|sq_num_wrfe		| Number of CQEs with error		|
|-----------------------|---------------------------------------|
|sq_num_mwbe		| Number of Memory Window bind errors	|
|-----------------------|---------------------------------------|
|sq_num_bre		| Number of bad response errors		|
|-----------------------|---------------------------------------|
|sq_num_rire		| Number of Remote Invalid request	|
|			| errors				|
|-----------------------|---------------------------------------|
|rq_num_rire		| Number of Remote Invalid request	|
|			| errors				|
|-----------------------|---------------------------------------|
|sq_num_rae		| Number of remote access errors	|
|-----------------------|---------------------------------------|
|rq_num_rae		| Number of remote access errors	|
|-----------------------|---------------------------------------|
|sq_num_roe		| Number of remote operation errors	|
|-----------------------|---------------------------------------|
|sq_num_tree		| Number of transport retries exceeded	|
|			| errors				|
|-----------------------|---------------------------------------|
|sq_num_rree		| Number of RNR NAK retries exceeded	|
|			| errors				|
|-----------------------|---------------------------------------|
|rq_num_rnr		| Number of RNR NAKs sent		|
|-----------------------|---------------------------------------|
|sq_num_rnr		| Number of RNR NAKs received		|
|-----------------------|---------------------------------------|
|rq_num_oos		| Number of Out of Sequence requests	|
|			| received				|
|-----------------------|---------------------------------------|
|sq_num_oos		| Number of Out of Sequence NAKs	|
|			| received				|
|-----------------------|---------------------------------------|
|rq_num_udsdprd		| Number of UD packets silently		|
|			| discarded on the Receive Queue due to	|
|			| lack of receive descriptor		|
|-----------------------|---------------------------------------|
|rq_num_dup		| Number of duplicate requests received	|
|-----------------------|---------------------------------------|
|sq_num_to		| Number of time out received		|
|-----------------------|---------------------------------------|
|num_cqovf		| Number of CQ overflows		|
|-----------------------|---------------------------------------|
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

And remove the sysfs in favor of common core version.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In procedure mlx4_ib_create_flow, passing an invalid port number
will cause an out-of-bounds array access. Data passed to this procedure
can come from user-space.  Therefore, need to validate port number
before proceeding onwards.

Note that we check against the number of physical ports declared at
the verbs (ib core) level; When bonding is active, the verbs level
sees one physical port, even though the low-level driver sees two ports.

Fixes: f77c0162 ("IB/mlx4: Add receive flow steering support")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Perform the test for device managed flow steering support even if
memory windows are not supported. I noticed this because smatch
reported inconsistent indentation for the device managed flow
steering support test.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Cc: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

fix spelling mistake, argumant -> argument
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

fix spelling mistake, argumant -> argument
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Implement newly introduced devlink interface. Add devlink port instances
for every port and set the port types accordingly.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
v2->v3:
-add dev param to devlink_register (api change)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for receiving multicast/unicast traffic with
the don't trap rule.

Sniffing these packets requires a flow steering rule of type NORMAL
at priority 0 with flag IB_FLOW_ATTR_FLAGS_DONT_TRAP set.
Choosing between multicast or unicast is done via ethernet L2 dest_mac
mask and value:
- If mask is all zeros - unicast and multicast are set.
- If mask non zero - only mask with multicast bit 1 and rest 0 is
                     supported, the mac value will choose if it is
                     multicast or unicast rule.

If the mask multicast bit is on and some other bits are on too, it means
a request for specific multicast or unicast, this is not supported,
either receive all multicast or all unicast.

Only when limitations are met registered QP will receive requested type
but other QPs can receive same traffic if registered for it.
Otherwise, if limitations are not met, an error will be returned.

Limitations:
- Rule must be with priority 0.
- A0 mode is not supported.
- Sniffer QP cannot appear in any other flow steering rule.
Signed-off-by: NMarina Varshaver <marinav@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Don't trap flag (i.e. IB_FLOW_ATTR_FLAGS_DONT_TRAP) indicates that QP
will receive traffic, but will not steal it.

When a packet matches a flow steering rule that was created with
the don't trap flag, the QPs assigned to this rule will get this
packet, but matching will continue to other equal/lower priority
rules. This will let other QPs assigned to those rules to get the
packet too.

If both don't trap rule and other rules have the same priority
and match the same packet, the behavior is undefined.

The don't trap flag can't be set with default rule types
(i.e. IB_FLOW_ATTR_ALL_DEFAULT, IB_FLOW_ATTR_MC_DEFAULT) as default rules
don't have rules after them and don't trap has no meaning here.
Signed-off-by: NMarina Varshaver <marinav@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Advertise RoCE v2 support in port_immutable attributes according to
the hardware's capabilities. This enables the verbs stack to use
RoCE v2 mode.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the hardware supports RoCE v2, we configure the hardware UDP
port according to the RoCE v2 Annex when mlx4_ib device is added.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To tell hardware about a gid with type RoCEv2, software needs a new
modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can
replace the old method, MLX4_SET_PORT_GID_TABLE, for  RoCEv1 gids.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

IB core driver adds a property of type to struct ib_gid_attr.
The mlx4 driver should take that in consideration when modifying or
querying the hardware gid table.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

mlx4 devices (ConnectX-2, ConnectX-3) has a limitation
where rdma read work queue entries cannot exceed 512 bytes.
A rdma_read wqe needs to fit in 512 bytes:
- wqe control segment (16 bytes)
- rdma segment (16 bytes)
- scatter elements (16 bytes each)

So max_sge_rd should be: (512 - 16 - 16) / 16 = 30.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

No ULP uses it anymore, go ahead and remove it.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support the new memory registration API by allocating a
private page list array in mlx4_ib_mr and populate it when
mlx4_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by setting the exact WQE as IB_WR_FAST_REG_MR, just take the
needed information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (mlx4_ib_mr)
- key (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding an ability to query the IB cache by a netdev and get the
attributes of a GID. These parameters are necessary in order to
successfully resolve the required GID (when the netdevice is known)
and get the Ethernet L2 attributes from a GID.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is now supported downstream.

In addition, this flag was supported only for IB_QPT_UD, now, with the
new implementation it is supported for all QP types.

Support IB_USER_VERBS_EX_CMD_CREATE_QP in order to get the flag from
user space using the extension create qp command.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This is an infrastructure step for allocating and attaching more than
one counter to QPs on the same port. Allocate a counters table and
manage the insertion and removals of the counters in load and unload of
mlx4 IB.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NBodong Wang <bodong@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Implements the IB core disassociate_ucontext API. The driver detaches the HW
resources for a given user context to prevent a dependency between application
termination and device disconnecting. This is done by managing the VMAs that
were mapped to the HW bars such as door bell and blueflame. When need to detach
remap them to an arbitrary kernel page returned by the zap API.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Manage RoCE gid table with logic in IB/core, which is common to all
vendors, and remove the mechanism from the mlx4 IB driver.
Since management of the GID cache may lead to index mismatch with the
hardware GID table, a translation between indexes is required when
modifying a QP or creating an address handle.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

get_netdev: get the net_device on the physical port of the IB transport port. In
port aggregation mode it is required to return the netdev of the active port.

modify_gid: note for a change in the RoCE gid cache. Handle this by writing to
the harsware GID table. It is possible that indexes in cahce and hardware tables
won't match so a translation is required when modifying a QP or creating an
address handle.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Applications must not assume that max_sge and max_sge_rd are the same,
Hence expose max_sge_rd correctly as well.
Reported-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is little chance our memory allocation will fail, so we can
combine initializing the work structs with allocating them instead of
looping through all of them once to allocate and again to initialize.
Then when we need to actually find out if our device is up or in the
process of going down, have all of our work structs batched up, take the
spin_lock once and only once, and do all of the batch under the one
spin_lock invocation instead of incurring all of the locked memory cycles
we would otherwise incur to take/release the spin_lock over and over
again.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We create a number of work structs to be queued up to a workqueue, and
on completion of the workqueue handler, the workqueue handler frees the
allocated memory.  If, however, we don't queue the work struct because
the device is going down, then we need to free the memory ourselves.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

On failure, we loop through all possible pointers and test them before
calling kfree.  But really, why even attempt to free items we didn't
allocate when we can easily loop through exactly and only the devices
for which the original memory allocation succeeded and free just those.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

mlx4 VFs can provide CQE raw time-stamping services, but they
don't have the hca core clock mapped to their PCI bars.

As such, we should not attempt to query and report the clock offset
to user space for VFs. Doing so causes query_device over VFs to fail
with -ENOSUPP.

Fixes: 4b664c43 ('IB/mlx4: Add support for CQ time-stamping')
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>