We set "tgec->cfg" to NULL before passing it to kfree().  There is no
need to set it to NULL at all.  Let's just delete it.

Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET
command and likewise it shouldn't require the CAP_NET_ADMIN capability.
Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 35c55c98 ("tipc: add neighbor monitoring framework") we
added a data area to the link monitor STATE messages under the
assumption that previous versions did not use any such data area.

For versions older than Linux 4.3 this assumption is not correct. In
those version, all STATE messages sent out from a node inadvertently
contain a 16 byte data area containing a string; -a leftover from
previous RESET messages which were using this during the setup phase.
This string serves no purpose in STATE messages, and should no be there.

Unfortunately, this data area is delivered to the link monitor
framework, where a sanity check catches that it is not a correct domain
record, and drops it. It also issues a rate limited warning about the
event.

Since such events occur much more frequently than anticipated, we now
choose to remove the warning in order to not fill the kernel log with
useless contents. We also make the sanity check stricter, to further
reduce the risk that such data is inavertently admitted.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 81729810 ("tipc: fix link priority propagation") introduced a
compatibility problem between TIPC versions newer than Linux 4.6 and
those older than Linux 4.4. In versions later than 4.4, link STATE
messages only contain a non-zero link priority value when the sender
wants the receiver to change its priority. This has the effect that the
receiver resets itself in order to apply the new priority. This works
well, and is consistent with the said commit.

However, in versions older than 4.4 a valid link priority is present in
all sent link STATE messages, leading to cyclic link establishment and
reset on the 4.6+ node.

We fix this by adding a test that the received value should not only
be valid, but also differ from the current value in order to cause the
receiving link endpoint to reset.
Reported-by: NAmar Nv <amar.nv005@gmail.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it
actually does not. The hardware probably does support it, but there is
no code to configure the filter. As a quick and simple fix, remove the
flag. This will cause the core to fall back to promiscuous mode.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Fixes: b50b72de ("net: mvneta: enable features before registering the driver")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.9-20161123' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-11-23

this is a pull request for net/master.

The patch by Oliver Hartkopp for the broadcast manager (bcm) fixes the
CAN-FD support, which may cause an out-of-bounds access otherwise.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drop duplicate headers types.h and delay.h from dwc_eth_qos.c.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2016-11-23

Sorry about the late pull request for 4.9, but we have one more
important Bluetooth patch that should make it to the release. It fixes
connection creation for Bluetooth LE controllers that do not have a
public address (only a random one).

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Should pass valid filter handle, not the netlink flags.

Fixes: 30a391a1 ("net sched filters: pass netlink message flags in event notification")
Signed-off-by: NRoman Mashak <mrv@mojatatu.com>
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com>
Reported-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the link change and EEE is enabled or disabled, always try to
re-negotiate this with the link partner.

Fixes: 450b05c1 ("net: dsa: bcm_sf2: add support for controlling EEE")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When busy polling while a link is down (during a link-flap test), TX
timeouts were observed as well as the following messages in the ring
buffer:

bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51
bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free tx failed. rc:-1
bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51
bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free rx failed. rc:-1

These were resolved by checking for link status and returning if link
was not up.
Signed-off-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Tested-by: NRob Miller <rob.miller@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commits 93821778 ("udp: Fix rcv socket locking") and
f7ad74fe ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into
__udpv6_queue_rcv_skb") UDP backlog handlers were renamed, but UDPlite
was forgotten.

This leads to crashes if UDPlite header is pulled twice, which happens
starting from commit e6afc8ac ("udp: remove headers from UDP packets
before queueing")

Bug found by syzkaller team, thanks a lot guys !

Note that backlog use in UDP/UDPlite is scheduled to be removed starting
from linux-4.10, so this patch is only needed up to linux-4.9

Fixes: 93821778 ("udp: Fix rcv socket locking")
Fixes: f7ad74fe ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into __udpv6_queue_rcv_skb")
Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an ipv6 address has the tentative flag set, it can't be
used as source for egress traffic, while the associated route,
if any, can be looked up and even stored into some dst_cache.

In the latter scenario, the source ipv6 address selected and
stored in the cache is most probably wrong (e.g. with
link-local scope) and the entity using the dst_cache will
experience lack of ipv6 connectivity until said cache is
cleared or invalidated.

Overall this may cause lack of connectivity over most IPv6 tunnels
(comprising geneve and vxlan), if the first egress packet reaches
the tunnel before the DaD is completed for the used ipv6
address.

This patch bumps a new genid after that the IFA_F_TENTATIVE flag
is cleared, so that dst_cache will be invalidated on
next lookup and ipv6 connectivity restored.

Fixes: 0c1d70af ("net: use dst_cache for vxlan device")
Fixes: 468dfffc ("geneve: add dst caching support")
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure mlx4_en_free_resources is called under the netdev state lock.
This is needed since RCU dereference of XDP prog should be protected.

Fixes: 326fe02d ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NSagi Grimberg <sagi@grimberg.me>
CC: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 7c6ae610, because l2tp_xmit_skb() never
returns NET_XMIT_CN, it ignores the return value of l2tp_xmit_core().

Cc: Gao Feng <gfree.wind@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For RT netlink, calcit() function should return the minimal size for
netlink dump message. This will make sure that dump message for every
network device can be stored.

Currently, rtnl_calcit() function doesn't account the size of header of
netlink message, this patch will fix it.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Knowing that:
  #define TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN        (0x1UL << 0)
  #define TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE       (0x5UL << 0)
and that 'bnxt_hwrm_tunnel_dst_port_alloc()' is only called with one of
these 2 constants, the TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_GENEVE can not
trigger.

Replace the bit test that overlap by an equality test, just as in
'bnxt_hwrm_tunnel_dst_port_free()' above.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix kernel-doc warning in <linux/netdevice.h> (missing ':'):

..//include/linux/netdevice.h:1904: warning: No description found for parameter 'prio_tc_map[TC_BITMASK + 1]'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dev_set_promiscuity failed in macvlan_open, it always invokes
dev_set_allmulti without checking if necessary.
Now check the IFF_ALLMULTI flag firstly before rollback the multicast
setting in the error handler.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix setting of SUPPORTED_FIBRE bit as it was not present in features
of KSZ8041.
Signed-off-by: NKirill Esipov <yesipov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 6f3b911d ("can: bcm: add support for CAN FD frames") the
CAN broadcast manager supports CAN and CAN FD data frames.

As these data frames are embedded in struct can[fd]_frames which have a
different length the access to the provided array of CAN frames became
dependend of op->cfsiz. By using a struct canfd_frame pointer for the array of
CAN frames the new offset calculation based on op->cfsiz was accidently applied
to CAN FD frame element lengths.

This fix makes the pointer to the arrays of the different CAN frame types a
void pointer so that the offset calculation in bytes accesses the correct CAN
frame elements.

Reference: http://marc.info/?l=linux-netdev&m=147980658909653Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The hci_get_route() API is used to look up local HCI devices, however
so far it has been incapable of dealing with anything else than the
public address of HCI devices. This completely breaks with LE-only HCI
devices that do not come with a public address, but use a static
random address instead.

This patch exteds the hci_get_route() API with a src_type parameter
that's used for comparing with the right address of each HCI device.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Andre Noll reported panics after my recent fix (commit 34fad54c
"net: __skb_flow_dissect() must cap its return value")

After some more headaches, Alexander root caused the problem to
init_default_flow_dissectors() being called too late, in case
a network driver like IGB is not a module and receives DHCP message
very early.

Fix is to call init_default_flow_dissectors() much earlier,
as it is a core infrastructure and does not depend on another
kernel service.

Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndre Noll <maan@tuebingen.mpg.de>
Diagnosed-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull apparmor bugfix from James Morris:
 "This has a fix for a policy replacement bug that is fairly serious for
  apache mod_apparmor users, as it results in the wrong policy being
  applied on an network facing service"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix change_hat not finding hat after policy replacement

Pull sparc fixes from David Miller:

 1) With modern networking cards we can run out of 32-bit DMA space, so
    support 64-bit DMA addressing when possible on sparc64. From Dave
    Tushar.

 2) Some signal frame validation checks are inverted on sparc32, fix
    from Andreas Larsson.

 3) Lockdep tables can get too large in some circumstances on sparc64,
    add a way to adjust the size a bit. From Babu Moger.

 4) Fix NUMA node probing on some sun4v systems, from Thomas Tai.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: drop duplicate header scatterlist.h
  lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined
  config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc
  sunbmac: Fix compiler warning
  sunqe: Fix compiler warnings
  sparc64: Enable 64-bit DMA
  sparc64: Enable sun4v dma ops to use IOMMU v2 APIs
  sparc64: Bind PCIe devices to use IOMMU v2 service
  sparc64: Initialize iommu_map_table and iommu_pool
  sparc64: Add ATU (new IOMMU) support
  sparc64: Add FORCE_MAX_ZONEORDER and default to 13
  sparc64: fix compile warning section mismatch in find_node()
  sparc32: Fix inverted invalid_frame_pointer checks on sigreturns
  sparc64: Fix find_node warning if numa node cannot be found

Pull networking fixes from David Miller:

 1) Clear congestion control state when changing algorithms on an
    existing socket, from Florian Westphal.

 2) Fix register bit values in altr_tse_pcs portion of stmmac driver,
    from Jia Jie Ho.

 3) Fix PTP handling in stammc driver for GMAC4, from Giuseppe
    CAVALLARO.

 4) Fix udplite multicast delivery handling, it ignores the udp_table
    parameter passed into the lookups, from Pablo Neira Ayuso.

 5) Synchronize the space estimated by rtnl_vfinfo_size and the space
    actually used by rtnl_fill_vfinfo. From Sabrina Dubroca.

 6) Fix memory leak in fib_info when splitting nodes, from Alexander
    Duyck.

 7) If a driver does a napi_hash_del() explicitily and not via
    netif_napi_del(), it must perform RCU synchronization as needed. Fix
    this in virtio-net and bnxt drivers, from Eric Dumazet.

 8) Likewise, it is not necessary to invoke napi_hash_del() is we are
    also doing neif_napi_del() in the same code path. Remove such calls
    from be2net and cxgb4 drivers, also from Eric Dumazet.

 9) Don't allocate an ID in peernet2id_alloc() if the netns is dead,
    from WANG Cong.

10) Fix OF node and device struct leaks in of_mdio, from Johan Hovold.

11) We cannot cache routes in ip6_tunnel when using inherited traffic
    classes, from Paolo Abeni.

12) Fix several crashes and leaks in cpsw driver, from Johan Hovold.

13) Splice operations cannot use freezable blocking calls in AF_UNIX,
    from WANG Cong.

14) Link dump filtering by master device and kind support added an error
    in loop index updates during the dump if we actually do filter, fix
    from Zhang Shengju.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  tcp: zero ca_priv area when switching cc algorithms
  net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit
  ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC
  tipc: eliminate obsolete socket locking policy description
  rtnl: fix the loop index update error in rtnl_dump_ifinfo()
  l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()
  net: macb: add check for dma mapping error in start_xmit()
  rtnetlink: fix FDB size computation
  netns: fix get_net_ns_by_fd(int pid) typo
  af_unix: conditionally use freezable blocking calls in read
  net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
  net: ethernet: ti: cpsw: add missing sanity check
  net: ethernet: ti: cpsw: fix secondary-emac probe error path
  net: ethernet: ti: cpsw: fix of_node and phydev leaks
  net: ethernet: ti: cpsw: fix deferred probe
  net: ethernet: ti: cpsw: fix mdio device reference leak
  net: ethernet: ti: cpsw: fix bad register access in probe error path
  net: sky2: Fix shutdown crash
  cfg80211: limit scan results cache size
  net sched filters: pass netlink message flags in event notification
  ...

We need to zero out the private data area when application switches
connection to different algorithm (TCP_CONGESTION setsockopt).

When congestion ops get assigned at connect time everything is already
zeroed because sk_alloc uses GFP_ZERO flag.  But in the setsockopt case
this contains whatever previous cc placed there.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tc could return NET_XMIT_CN as one congestion notification, but
it does not mean the packe is lost. Other modules like ipvlan,
macvlan, and others treat NET_XMIT_CN as success too.
So l2tp_eth_dev_xmit should add the NET_XMIT_CN check.
Signed-off-by: NGao Feng <gfree.wind@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's not much point, except compile test, enabling the stmmac
platform drivers unless the STM32 SoC is enabled. It's not
useful without it.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After a policy replacement, the task cred may be out of date and need
to be updated. However change_hat is using the stale profiles from
the out of date cred resulting in either: a stale profile being applied
or, incorrect failure when searching for a hat profile as it has been
migrated to the new parent profile.

Fixes: 01e2b670 (failure to find hat)
Fixes: 898127c3 (stale policy being applied)
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287
Cc: stable@vger.kernel.org
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Pull ARM fixes from Russell King:
 "A few more ARM fixes:

   - the assembly backtrace code suffers problems with the new printk()
     implementation which assumes that kernel messages without KERN_CONT
     should have newlines inserted between them. Fix this.
   - fix a section naming error - ".init.text" rather than ".text.init"
   - preallocate DMA debug memory at core_initcall() time rather than
     fs_initcall(), as we have some core drivers that need to use DMA
     mapping - and that triggers a kernel warning from the DMA debug
     code.
   - fix XIP kernels after the ro_after_init changes made this data
     permanently read-only"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: Fix XIP kernels
  ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
  ARM: 8624/1: proc-v7m.S: fix init section name
  ARM: fix backtrace

The comment block in socket.c describing the locking policy is
obsolete, and does not reflect current reality. We remove it in this
commit.

Since the current locking policy is much simpler and follows a
mainstream approach, we see no need to add a new description.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the link is filtered out, loop index should also be updated. If not,
loop index will not be correct.

Fixes: dc599f76 ("net: Add support for filtering link dump by master device and kind")
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind().
Without lock, a concurrent call could modify the socket flags between
the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way,
a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it
would then leave a stale pointer there, generating use-after-free
errors when walking through the list or modifying adjacent entries.

BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8
Write of size 8 by task syz-executor/10987
CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0
 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc
 ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0
Call Trace:
 [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15
 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
 [<     inline     >] print_address_description mm/kasan/report.c:194
 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283
 [<     inline     >] kasan_report mm/kasan/report.c:303
 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329
 [<     inline     >] __write_once_size ./include/linux/compiler.h:249
 [<     inline     >] __hlist_del ./include/linux/list.h:622
 [<     inline     >] hlist_del_init ./include/linux/list.h:637
 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239
 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
 [<ffffffff813774f9>] task_work_run+0xf9/0x170
 [<ffffffff81324aae>] do_exit+0x85e/0x2a00
 [<ffffffff81326dc8>] do_group_exit+0x108/0x330
 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
 [<ffffffff811b49af>] do_signal+0x7f/0x18f0
 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
 [<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448
Allocated:
PID = 10987
 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0
 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20
 [ 1116.897025] [<     inline     >] slab_post_alloc_hook mm/slab.h:417
 [ 1116.897025] [<     inline     >] slab_alloc_node mm/slub.c:2708
 [ 1116.897025] [<     inline     >] slab_alloc mm/slub.c:2716
 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721
 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326
 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388
 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182
 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153
 [ 1116.897025] [<     inline     >] sock_create net/socket.c:1193
 [ 1116.897025] [<     inline     >] SYSC_socket net/socket.c:1223
 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203
 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6
Freed:
PID = 10987
 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0
 [ 1116.897025] [<     inline     >] slab_free_hook mm/slub.c:1352
 [ 1116.897025] [<     inline     >] slab_free_freelist_hook mm/slub.c:1374
 [ 1116.897025] [<     inline     >] slab_free mm/slub.c:2951
 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973
 [ 1116.897025] [<     inline     >] sk_prot_free net/core/sock.c:1369
 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444
 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452
 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460
 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471
 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589
 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243
 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170
 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00
 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330
 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0
 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
 [ 1116.897025] [<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Memory state around the buggy address:
 ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                    ^
 ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

==================================================================

The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table.

Fixes: c51ce497 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case")
Reported-by: NBaozeng Ding <sploving1@gmail.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Tested-by: NBaozeng Ding <sploving1@gmail.com>
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARM SoC fixes from Olof Johansson:
 "Again a set of smaller fixes across several platforms (OMAP, Marvell,
  Allwinner, i.MX, etc).

  A handful of typo fixes and smaller missing contents from device
  trees, with some tweaks to OMAP mach files to deal with CPU feature
  print misformatting, potential NULL ptr dereference and one setup
  issue with UARTs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
  ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
  ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
  ARM: omap3: Add missing memory node in SOM-LV
  arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
  arm64: dts: marvell: fix clocksource for CP110 slave SPI0
  arm64: dts: marvell: Fix typo in label name on Armada 37xx
  ASoC: omap-abe-twl6040: fix typo in bindings documentation
  dts: omap5: board-common: enable twl6040 headset jack detection
  dts: omap5: board-common: add phandle to reference Palmas gpadc
  ARM: OMAP2+: avoid NULL pointer dereference
  ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
  ARM: dts: omap3: Fix memory node in Torpedo board
  ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
  ARM: OMAP3: Fix formatting of features printed
  ARM: dts: imx53-qsb: Fix regulator constraints
  ARM: dts: sun8i: fix the pinmux for UART1

Pull ext4 fixes from Ted Ts'o:
 "A security fix (so a maliciously corrupted file system image won't
  panic the kernel) and some fixes for CONFIG_VMAP_STACK"

* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: sanity check the block and cluster size at mount time
  fscrypto: don't use on-stack buffer for key derivation
  fscrypto: don't use on-stack buffer for filename encryption

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by: NBorislav Petkov <bp@alien8.de>
Reported-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename.  Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>