- 25 5月, 2010 3 次提交
-
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warnings: arch/xtensa/kernel/vectors.S: asm/processor.h is included more than once. arch/xtensa/kernel/vectors.S: asm/ptrace.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Also remove lots of unused irq_cpustat fields. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 5月, 2010 25 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: cmd640: fix kernel oops in test_irq() method pdc202xx_old: ignore "FIFO empty" bit in test_irq() method pdc202xx_old: wire test_irq() method for PDC2026x IDE: pass IRQ flags to the IDE core ide: fix comment typo in ide.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits) Blackfin: SMP: fix continuation lines Blackfin: acvilon: fix timeout usage for I2C Blackfin: fix typo in BF537 IRQ comment Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options Blackfin: set ARCH_KMALLOC_MINALIGN Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic Blackfin: another year of changes (update copyright in boot log) Blackfin: optimize strncpy a bit Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests Blackfin: move string functions to normal lib/ assembly Blackfin: SIC: cut down on IAR MMR reads a bit Blackfin: bf537-minotaur: fix build errors due to header changes Blackfin: kgdb: pass up the CC register instead of a 0 stub Blackfin: handle HW errors in the new "FAULT" printing code Blackfin: show the whole accumulator in the pseudo DBG insn Blackfin: support all possible registers in the pseudo instructions Blackfin: add support for the DBG (debug output) pseudo insn Blackfin: change the BUG opcode to an unused 16-bit opcode Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg Blackfin: add support for the DBGA (debug assert) pseudo insn ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing由 Linus Torvalds 提交于
* 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: ds2760_battery: Document ABI change ds2760_battery: Make charge_now and charge_full writeable power_supply: Add support for writeable properties power_supply: Use attribute groups power_supply: Add test_power driver tosa_battery: Fix build error due to direct driver_data usage wm97xx_battery: Quieten sparse warning (bat_set_pdata not declared) ds2782_battery: Get rid of magic numbers in driver_data ds2782_battery: Add support for ds2786 battery gas gauge pda_power: Add function callbacks for suspend and resume wm831x_power: Use genirq Driver for Zipit Z2 battery chip ds2782_battery: Fix clientdata on removal
-
由 Linus Torvalds 提交于
Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: Fix slack calculation for expired timers timekeeping: Fix timezone update
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: confusion between kmap() and kmap_atomic() api exofs: Add default address_space_operations
-
由 Linus Torvalds 提交于
This reverts commit 03ceedea, since it breaks resume from suspend-to-ram on Rafael's Acer Ferrari One. NetworkManager thinks everything is ok, but it can't connect to the AP to get an IP address after the resume. In fact, it even breaks resume for non-ath9k chipsets: reverting it also fixes Rafael's Toshiba Protege R500 with the iwlagn driver. As Johannes says: "Indeed, this patch needs to be reverted. That mac80211 change is wrong and completely unnecessary." Reported-and-requested-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Daniel Yingqiang Ma <yma.cool@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6: fat: convert to unlocked_ioctl fat: Cleanup nls_unload() usage fat: use pack_hex_byte() instead of custom one
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: Optimize TCREATE by eliminating a redundant fid clone. 9p: cleanup: remove unneeded assignment 9p: Add mksock support fs/9p: Make sure we properly instantiate dentry. 9p: add 9P2000.L rename operation 9p: add 9P2000.L statfs operation 9p: VFS switches for 9p2000.L: VFS switches 9p: VFS switches for 9p2000.L: protocol and client changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (59 commits) ceph: reuse mon subscribe message instead of allocated anew ceph: avoid resending queued message to monitor ceph: Storage class should be before const qualifier ceph: all allocation functions should get gfp_mask ceph: specify max_bytes on readdir replies ceph: cleanup pool op strings ceph: Use kzalloc ceph: use common helper for aborted dir request invalidation ceph: cope with out of order (unsafe after safe) mds reply ceph: save peer feature bits in connection structure ceph: resync headers with userland ceph: use ceph. prefix for virtual xattrs ceph: throw out dirty caps metadata, data on session teardown ceph: attempt mds reconnect if mds closes our session ceph: clean up send_mds_reconnect interface ceph: wait for mds OPEN reply to indicate reconnect success ceph: only send cap releases when mds is OPEN|HUNG ceph: dicard cap releases on mds restart ceph: make mon client statfs handling more generic ceph: drop src address(es) from message header [new protocol feature] ...
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: of: change of_match_device to work with struct device of: Remove duplicate fields from of_platform_driver drivercore: Add of_match_table to the common device drivers arch/microblaze: Move dma_mask from of_device into pdev_archdata arch/powerpc: Move dma_mask from of_device into pdev_archdata of: eliminate of_device->node and dev_archdata->{of,prom}_node of: Always use 'struct device.of_node' to get device node pointer. i2c/of: Allow device node to be passed via i2c_board_info driver-core: Add device node pointer to struct device of: protect contents of of_platform.h and of_device.h of/flattree: Make unflatten_device_tree() safe to call from any arch of/flattree: make of_fdt.h safe to unconditionally include.
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Use alloc_pages_exact_node() for page allocation slub: __kmalloc_node_track_caller should trace kmalloc_large_node case slub: Potential stack overflow crypto: Use ARCH_KMALLOC_MINALIGN for CRYPTO_MINALIGN now that it's exposed mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slub_def.h> mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slob_def.h> mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slab_def.h> slab: Fix missing DEBUG_SLAB last user slab: add memory hotplug support slab: Fix continuation lines
-
由 Randy Dunlap 提交于
Add build testing using 'O=builddir'. Add build testing with various kconfig symbols disabled, listing common ones that are known to cause build problems. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Hutchings 提交于
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
scsi_scan.c: fix incorrectly formatted kernel-doc notation & convert documentation of 2 functions into kernel-doc. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
documentation: slightly more correct value for MAP_HUGETLB in map_hugetlb.c still not correct for alpha, mips, parisc or xtensa but working out of the box in the most common architectures without having to deal with complicated macros or including architecture specific headers. Signed-off-by: NCarlo Marcelo Arenas Belon <carenas@sajinet.com.pe> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Gelmini 提交于
Documentation/timers/hpet_example.c: fcntl.h is included more than once. Documentation/timers/hpet_example.c: signal.h is included more than once. Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Update explanation of mmotm. Add explanation of drivers/staging/. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Add info on maintainers and persistent posting. Update git home page. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H Hartley Sweeten 提交于
In the example the module_init function should be static. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Chua 提交于
commit 3bbb9ec9 (timers: Introduce the concept of timer slack for legacy timers) does not take the case into account when the timer is already expired. This broke wireless drivers. The solution is not to apply slack to already expired timers. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com>
-
由 Thomas Gleixner 提交于
commit 64ce4c2f (time: Clean up warp_clock()) breaks the timezone update in a very subtle way. To avoid the direct access to timekeeping internals it adds the timezone delta to the current time with timespec_add_safe(). This works nicely when the timezone delta is > 0. If timezone delta is < 0 then the wrap check in timespec_add_safe() triggers and timespec_add_safe() returns TIME_MAX and screws up timekeeping completely. The comment above timespec_add_safe() says: It's assumed that both values are valid (>= 0) Add the timezone seconds adjustment directly. Reported-by: NRafael J. Wysocki <rjw@sisk.pl> Tested-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Paul Mundt 提交于
The build scripts inadvertently dropped this down to 29-bit, fix it back up. Reported-by: NRaul Porcel <armin76@gentoo.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Andrea Gelmini 提交于
arch/sh/lib/strlen.S:38: ERROR: trailing whitespace Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 23 5月, 2010 12 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Wolfram Sang 提交于
The timeout value is in jiffies, so it should be using HZ, not a plain number. As '10000' is ambiguous, 1HZ is used as conservative default. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Valentin Yakovenkov <yakovenkov@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Reported-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 FUJITA Tomonori 提交于
Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Some drivers allocate L1 SRAM in atomic contexts, so make sure these functions also use GFP_ATOMIC to avoid BUG()'s. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
Add a little strncpy optimization which can easily cut boot time by 20%. When the kernel is booting with initramfs, it builds up the filesystem from a cpio archive by calling strncpy_from_user() via fs/namei.c's do_getname() on every file in the archive (which can be lots) with a length of PATH_MAX (1024). This causes the dest of the strncpy to be padded with many NUL bytes. This optimization mostly causes these NUL bytes to be padded with a call to memset() which is already optimized for filling memory quickly, but the hardware loop helps a little bit as well. Boot time measured with 'loglevel=0' so UART speed doesn't get in the way. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The IADDR2DTEST() macro had some duplicated logic with bit 11 and some incorrect comments, so scrub all of that. In order to verify these aren't a problem (and won't be in the future), extend the self tests to operate on as much L1 SRAM as possible. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
Since 'extern inline' doesn't work correctly in the context of the Linux kernel (too many overriding defines), move the string functions to normal lib/ assembly files (like the existing mem funcs). This avoids the forced inline all over the kernel and allows us to place them constantly in L1. This also avoids some module failures when gcc inserts calls to string functions but the kernel build system doesn't fully consult the library archives. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Tweak the for loops that operate on the SIC IAR system MMRs to avoid re-reading them multiple times in a row. System MMRs are a little slower to access, so avoid the penalty when possible. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-