- 20 10月, 2014 1 次提交
-
-
由 Wolfram Sang 提交于
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 25 1月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 22 2月, 2013 1 次提交
-
-
由 Doug Anderson 提交于
There is simply no reason to be manually setting the private driver data to NULL in the remove/fail to probe cases. This is just extra cruft code that can be removed. A few notes: * Nothing relies on drvdata being set to NULL. * The __device_release_driver() function eventually calls dev_set_drvdata(dev, NULL) anyway, so there's no need to do it twice. * I verified that there were no cases where xxx_get_drvdata() was being called in these drivers and checking for / relying on the NULL return value. This could be cleaned up kernel-wide but for now just take the baby step and remove from the i2c subsystem. Reported-by: NWolfram Sang <wsa@the-dreams.de> Reported-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NDoug Anderson <dianders@chromium.org> Reviewed-by: NJean Delvare <khali@linux-fr.org> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: NMarek Vasut <marex@denx.de> Signed-off-by: NWolfram Sang <wolfram@the-dreams.de>
-
- 23 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: NJean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
-
- 19 7月, 2012 1 次提交
-
-
由 Theodore Ts'o 提交于
With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a no-op; interrupt randomness is now collected unconditionally in a very low-overhead fashion; see commit 775f4b29. The IRQF_SAMPLE_RANDOM flag was scheduled to be removed in 2009 on the feature-removal-schedule, so this patch is preparation for the final removal of this flag. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de>
-
- 13 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
Convert the drivers in drivers/i2c/busses/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: NJochen Friedrich <jochen@scram.de> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 29 10月, 2011 1 次提交
-
-
由 Yong Zhang 提交于
Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NBarry Song <21cnbao@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 22 5月, 2010 1 次提交
-
-
由 H Hartley Sweeten 提交于
As warned by checkpatch.pl, <linux/io.h> should be used instead of <asm/io.h>. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 17 6月, 2009 1 次提交
-
-
由 Linus Walleij 提交于
This replace all instances in the i2c busses tree of res->end - res->start + 1 with the handy macro resource_size(res) from ioport.h (coming in from platform_device.h). This was created with a simple sed -i -e 's/\([a-z]*\)->end *- *[a-z]*->start *+ *1/resource_size(\1)/g' Then manually replacing the PXA redefiniton of the same kind of macro manually. Recompiled some ARM defconfigs I could find to make a rough test so it shouldn't break anything, though I couldn't see exactly which configs you need for all the drivers. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 11 12月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
tmp is used as host-endian and is loaded from a be64, fix the cast and the endian accessor used. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 15 7月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Let general purpose I2C/SMBus bus drivers add SPD to their class. Once this is done, we will be able to tell the eeprom driver to only probe for SPD EEPROMs and similar on these buses. Note that I took a conservative approach here, adding I2C_CLASS_SPD to many drivers that have no idea whether they can host SPD EEPROMs or not. This is to make sure that the eeprom driver doesn't stop probing buses where SPD EEPROMs or equivalent live. So, bus driver maintainers and users should feel free to remove the SPD class from drivers those buses never have SPD EEPROMs or they don't want the eeprom driver to bind to them. Likewise, feel free to add the SPD class to any bus driver I might have missed. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 23 4月, 2008 2 次提交
-
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable I2C platform drivers, to allow module auto loading. [ db: add some more drivers ] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 25 2月, 2008 1 次提交
-
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 19 10月, 2007 1 次提交
-
-
由 Joe Perches 提交于
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: NJoe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 7月, 2007 1 次提交
-
-
由 Marc St-Jean 提交于
Add TWI driver for the PMC-Sierra MSP71xx devices. [JD: Drop the probe hack, don't set algo_data as we never use it, return the right error code if the driver registration fails.] Signed-off-by: NMarc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-