Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The latter is used as part of gfs2-private part of struct inode.
It actually stores a lot of fields differently; for now the
declaration is just cloned, inode field is swtiched and changes
propagated.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix the OOM error handling in inode.c where it was possible for
a NULL pointer to be dereferenced.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch has gfs2_security_init declared as a static function, which
is correct. As a result, the declaration of this function in inode.h is
removed (and thus inode.h is unchanged). Also removed #include eaops.h,
which is not needed.
Signed-Off-By: NRyan O'Hara <rohara@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This does nothing atm, but will be required for later support of
r/o bind mounts.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

In many places GFS2 was calling the endian conversion routines
for an inode even when only a single field, or a few fields might
have changed. As a result we were copying lots of data needlessly.

This patch replaces those calls with conversion of just the
required fields in each case. This should be faster and easier
to understand. There are still other places which suffer from this
problem, but this is a start in the right direction.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86.  (It would be more on an x86_64 system).  This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).

This patch:

The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer.  Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer.  This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

As per Andrew Morton's request, removed trailing whitespace.

Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.

Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.

Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.
Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The remains of the changes for Jan Engelhardt's third email. Remove
a cast and tidy up gfs2_inode_attr_in.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This makes all fixed size types have consistent names.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As per Jan Engelhardt's third set of comments, this make various
code style changes and moves the structures from format.h into
super.c, which was the only place that format.h was actually used.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Tidy up some files and remove an unused routine in meta_io.h. Also
added a bit of extra debugging in meta_io.h.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

A missing initialisation when creating a new on disk inode.
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds a generation number for the eventual use of NFS to the
ondisk inode. Its backward compatible with the current code since
it doesn't really matter what the generation number is to start with,
and indeed since its set to zero, due to it being taken from padding
in both the inode and rgrp header, it should be fine.

The eventual plan is to use this rather than no_formal_ino in the
NFS filehandles. At that point no_formal_ino will be unused.

At the same time we also add a releasepages call back to the
"normal" address space for gfs2 inodes. Also I've removed a
one-linrer function thats not required any more.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This really is the correct fix this time. We just ignore all
glocks associated with inodes until the inodes are pushed
from the inode cache. At that point the glocks are queued for
reclaim, so we don't need to do it here.

Also fix one or two other minor bugs.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The flag GIF_MIN_INIT is no longer used or required.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

gfs2_repermission is just a wrapper for permission, so remove it and
call permission directly where required.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes the way we have been dealing with unlinked,
but still open files. It removes all limits (other than memory
for inodes, as per every other filesystem) on numbers of these
which we can support on GFS2. It also means that (like other
fs) its the responsibility of the last process to close the file
to deallocate the storage, rather than the person who did the
unlinking. Note that with GFS2, those two events might take place
on different nodes.

Also there are a number of other changes:

 o We use the Linux inode subsystem as it was intended to be
used, wrt allocating GFS2 inodes
 o The Linux inode cache is now the point which we use for
local enforcement of only holding one copy of the inode in
core at once (previous to this we used the glock layer).
 o We no longer use the unlinked "special" file. We just ignore it
completely. This makes unlinking more efficient.
 o We now use the 4th block allocation state. The previously unused
state is used to track unlinked but still open inodes.
 o gfs2_inoded is no longer needed
 o Several fields are now no longer needed (and removed) from the in
core struct gfs2_inode
 o Several fields are no longer needed (and removed) from the in core
superblock

There are a number of future possible optimisations and clean ups
which have been made possible by this patch.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds some extra debugging to glock.c and changes
inode.c's deallocation code to call the debugging code
at a suitable moment. I'm chasing down a particular bug
to do with deallocation at the moment and the code can
go again once the bug is fixed.

Also this includes the first part of some changes to unify
the Linux struct inode and GFS2's struct gfs2_inode. This
transformation will happen in small parts over the next short
period.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We no longer use semaphores, everything has been converted to
mutex or rwsem, so we don't need to include this header any more.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The ref count of certain glock's got elevated too far during unlink
which caused umount to fail. This fixes it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The gh_owner field shouldn't be set or reset outside the glock code.
These were left over from when recursive locking was allowed. It
isn't any more, so they are not needed.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds readpages support (and also corrects a small bug in
the readpage error path at the same time). Hopefully this will
improve performance by allowing GFS to submit larger lumps of
I/O at a time.

In order to simplify the setting of BH_Boundary, it currently gets
set when we hit the end of a indirect pointer block. There is
always a boundary at this point with the current allocation code.
It doesn't get all the boundaries right though, so there is still
room for improvement in this.

See comments in fs/gfs2/ops_address.c for further information about
readpages with GFS2.

Signed-off-by: Steven Whitehouse

Despite my earlier careful search, there was a recursive lock left
in the deallocation code. This removes it. It also should speed up
deallocation be reducing the number of locking operations which take
place by using two "try lock" operations on the two locks involved in
inode deallocation which allows us to grab the locks out of order
(compared with NFS which grabs the inode lock first and the iopen
lock later). It is ok for us to fail while doing this since if it
does fail it means that someone else is still using the inode and
thus it wouldn't be possible to deallocate anyway.

This fixes the bug reported to me by Rob Kenna.

Cc: Rob Kenna <rkenna@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

At some stage, a mutex was added to gfs2_glock_put() without
checking all its call sites. Two of them were called from
under a spinlock causing random delays at various points and
crashes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This reduces the size of the directory code by about 3k and gets
readdir() to use the functions which were introduced in the previous
directory code update.

Two memory allocations are merged into one. Eliminates zeroing of some
buffers which were never used before they were initialised by
other data.

There is still scope for further improvement in the directory code.

On the logging side, a hand created mutex has been replaced by a
standard Linux mutex in the log allocation code.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Due to a typo, the dir leaf split operation was (for the first
split in a directory) writing the new hash vaules at the
wrong offset. This is now fixed.

Also some other tidy ups are included:

 - We use GFS2's hash function for dentries (see ops_dentry.c) so that
   we don't have to keep recalculating the hash values.
 - A lot of common code is eliminated between the various directory
   lookup routines.
 - Better error checking on directory lookup (previously different
   routines checked for different errors)
 - The leaf split operation has a couple of redundant operations
   removed from it, so it should be faster.

There is still further scope for further clean ups in the directory
code, and readdir in particular could do with slimming down a bit.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We no longer lookup ".gfs2_admin" in the root directory in order to
find it, but instead use the inode number given in the superblock.
Both the root directory and the admin directory are now looked up using
the same routine, so the redundant code is removed.

Also, there is no longer a reference to the root inode in the
GFS2 super block. When required this can be retreived via
sb->s_root->d_inode instead.

Assuming that we introduce a metadata filesystem type for GFS, then
this is a first step towards that goal.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As suggested by Pekka Enberg <penberg@cs.helsinki.fi>.

The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h
The other macros are gone from gfs2.h as (although not requested
by Pekka Enberg) are a number of included header file which are now
included individually. The inode number comparison function is
now an inline function.

The DT2IF and IF2DT may be addressed in a future patch.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Requested by:
Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As well as a number of minor bug fixes, this patch changes GFS
to use mutices rather than semaphores. This results in better
information in case there are any locking problems.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Umount is now working correctly again. The bug was due to
not getting an extra ref count when mounting the fs. We
should have bumped it by two (once for the internal pointer
to the root inode from the super block and once for the
inode hanging off the dcache entry for root).

Also this patch tidys up the code dealing with looking up
and creating inodes. We now pass Linux inodes (with gfs2_inodes
attached) rather than the other way around and this reduces code
duplication in various places.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Add the new external read function. Its temporarily in jdata.c
even though the protoype is in ops_file.h - this will change
shortly. The current implementation will change to a page cache
one when that happens.

In order to effect the above changes, the various internal inodes
now have Linux inodes attached to them. We keep the references to
the Linux inodes, rather than the gfs2_inodes in the super block.

In order to get everything to work correctly I've had to reorder
the init sequence on mount (which I should probably have done
earlier when .gfs2_admin was made visible).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

A two line fix to get endian conversion correct.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds an extra argument to gfs2_trans_add_bh() to indicate whether the
bh being added to the transaction is metadata or data. Its currently unused
since all existing callers set it to 1 (metadata) but following patches will
make use of it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We no longer allocate a dinode on the stack in init_dinode()
and we no longer use gfs2_dinode_out (eliminating one copy) and
gfs2_meta_header_in (eliminating another copy). The meta_header_in
fucntion is now no longer referenced from outside gfs2_ondisk.c, so
make it static.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>