sharing.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26248a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26247a
Signed-off-by: NNathan Scott <nathans@sgi.com>

Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26201a
Signed-off-by: NNathan Scott <nathans@sgi.com>

getting decremented by 1.  Since nused never reaches 0, the "if
(!free->hdr.nused)" check in xfs_dir2_leafn_remove() fails every time and
xfs_dir2_shrink_inode() doesn't get called when it should.  This causes
extra blocks to be left on an empty directory and the directory in unable
to be converted back to inline extent mode.

SGI-PV: 951958
SGI-Modid: xfs-linux-melb:xfs-kern:211382a
Signed-off-by: NMandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

test hang.

SGI-PV: 953563
SGI-Modid: xfs-linux-melb:xfs-kern:26182a
Signed-off-by: NNathan Scott <nathans@sgi.com>

fsstress warnings.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26111a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904192
SGI-Modid: xfs-linux-melb:xfs-kern:26110a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26109a
Signed-off-by: NNathan Scott <nathans@sgi.com>

porters.

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26108a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26107a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 9533338
SGI-Modid: xfs-linux-melb:xfs-kern:26106a
Signed-off-by: NNathan Scott <nathans@sgi.com>

originally by Glen.

SGI-PV: 932952
SGI-Modid: xfs-linux-melb:xfs-kern:26105a
Signed-off-by: NNathan Scott <nathans@sgi.com>

interface.

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26103a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26102a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26101a
Signed-off-by: NNathan Scott <nathans@sgi.com>

truncate down followed by delayed allocation (buffered writes) - worst
case scenario for the notorious NULL files problem.  This reduces the
window where we are exposed to that problem significantly.

SGI-PV: 917976
SGI-Modid: xfs-linux-melb:xfs-kern:26100a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26099a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26097a
Signed-off-by: NNathan Scott <nathans@sgi.com>

shutdown vop flags consistent with sync vop flags declarations too.

SGI-PV: 939911
SGI-Modid: xfs-linux-melb:xfs-kern:26096a
Signed-off-by: NNathan Scott <nathans@sgi.com>

layers.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26095a
Signed-off-by: NNathan Scott <nathans@sgi.com>

anymore here.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26094a
Signed-off-by: NNathan Scott <nathans@sgi.com>

init_rwsem() has no return value.  This is not a problem if init_rwsem()
is a function, but it's a problem if it's a do { ...  } while (0) macro. 
(which lockdep introduces) 

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26082a
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NNathan Scott <nathans@sgi.com>

logged version of di_next_unlinked which is actually always stored in the
correct ondisk format. This was pointed out to us by Shailendra Tripathi.
And is evident in the xfs qa test of 121.

SGI-PV: 953263
SGI-Modid: xfs-linux-melb:xfs-kern:26044a
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

transaction completion from marking the inode dirty while it is being
cleaned up on it's way out of the system.

SGI-PV: 952967
SGI-Modid: xfs-linux-melb:xfs-kern:26040a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

64bit kernels allow recovery to handle both versions and do the necessary
decoding

SGI-PV: 952214
SGI-Modid: xfs-linux-melb:xfs-kern:26011a
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

transaction within each such operation may involve multiple locking of AGF
buffer. While the freeing extent function has sorted the extents based on
AGF number before entering into transaction, however, when the file system
space is very limited, the allocation of space would try every AGF to get
space allocated, this could potentially cause out-of-order locking, thus
deadlock could happen. This fix mitigates the scarce space for allocation
by setting aside a few blocks without reservation, and avoid deadlock by
maintaining ascending order of AGF locking.

SGI-PV: 947395
SGI-Modid: xfs-linux-melb:xfs-kern:210801a
Signed-off-by: NYingping Lu <yingping@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 953061
SGI-Modid: xfs-linux-melb:xfs-kern:25986a
Signed-off-by: NBarry Naujok <bnaujok@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

mmap only.

SGI-PV: 952736
SGI-Modid: xfs-linux-melb:xfs-kern:25922a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:25921a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 952291
SGI-Modid: xfs-linux-melb:xfs-kern:209807a
Signed-off-by: NMandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

ATTR_NOLOCK flag, but this was split off some time ago, as ATTR_DMI needed
to be used separately.	Two asserts were added to guard correctness of the
code during the transition.  These are no longer required.

SGI-PV: 952145
SGI-Modid: xfs-linux-melb:xfs-kern:209633a
Signed-off-by: NOlaf Weber <olaf@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25808a
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25807a
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25806a
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NNathan Scott <nathans@sgi.com>

the range spanned by modifications to the in-core extent map.  Add
XFS_BUNMAPI() and XFS_SWAP_EXTENTS() macros that call xfs_bunmapi() and
xfs_swap_extents() via the ioops vector. Change all calls that may modify
the in-core extent map for the data fork to go through the ioops vector. 
This allows a cache of extent map data to be kept in sync.

SGI-PV: 947615
SGI-Modid: xfs-linux-melb:xfs-kern:209226a
Signed-off-by: NOlaf Weber <olaf@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: remove risky prefetch on next_skb->data
  e1000: fix ethtool test irq alloc as "probe"
  [PATCH] bcm43xx: add DMA rx poll workaround to DMA4

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

__futex_atomic_op needs to do an atomic operation in the user address space,
not the kernel address space.  Add the missing sacf 256/sacf 0 to switch to
the secondary mode before doing the compare-and-swap.  In addition add
another fixup for catch specification exceptions if the compare-and-swap
address is not aligned.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Looking at the reiser4 crash, I found a leak in debugfs. In
debugfs_mknod(), we create the inode before checking if the dentry
already has one attached. We don't free it if that is the case.

These bugs happen quite often, I'm starting to think we should disallow
such coding in CodingStyle.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>