- 15 1月, 2006 5 次提交
-
-
由 Ingo Molnar 提交于
- Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Panagiotis Christeas 提交于
- Workaround to fix a known regression at cx88-tvaudio.c - provide a module parameter workaround to always enable analog output. Signed-off-by: NPanagiotis Christeas <p_christ@hol.gr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
- This patch makes some needlessly global code static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
- Cx88 alsa is experimental. - Removed need of PCM OSS for an ALSA module. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
- Enabled audio PLL. This is mandatory for NICAM sound - modify FM IF frequency to 5.5MHz for SAA7133/35 if tuner is tda8290 Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 14 1月, 2006 8 次提交
-
-
由 Hans Verkuil 提交于
- Add support for Samsung tuner TCPN 2121P30A, used in Hauppauge PVR-500 cards. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Tunertype struct redefined to allow one or more tuner_params structs per tuner definition, one for each video standard. - Each tuner_params struct has an element containing an arbitrary amount of tuner_ranges. (this is needed for dvb tuners - to be handled later) - A tuner_range may be referenced by multiple tuner_params structs. There are many duplicates in here. Reusing tuner_range structs, rather than defining new ones for each tuner, will cut down on memory usage, and is preferred when possible. - tunertype struct contains an element, has_tda988x. We must set this for all tunertypes that contain a tda988x chip, and then we can remove this setting from the various card structs. - Improves tuners array memory usage efficiency. - Right now, all tuners are using the first tuner_params[] array element for analog mode. In the future, we will be merging similar tuner definitions together, such that each tuner definition will have a tuner_params struct for each available video standard. At that point, the tuner_params[] array element will be chosen based on the video standard in use. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Updated MODULE_AUTHOR Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Build cx88-alsa when CONFIG_VIDEO_CX88_ALSA is selected. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
- Include missing MODULE_* macros. - Fixed cx88_vp3054_i2c: module license 'unspecified' taints kernel. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. build-tested. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
Changes MODULE_PARM usage to module_param Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
- Static vars are equal to zero by default. Removed unnecessary =0 from them, saving some data space Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 1月, 2006 27 次提交
-
-
由 John W. Linville 提交于
At least some versions of the via-velocity hardware only support checksumming IPv4 frames in hardware. However, the driver is currently setting the NETIF_F_HW_CSUM flag, which indicates support for more than just IPv4. This results in errors when trying to use IPv6 over via-velocity hardware. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jay Vosburgh 提交于
I believe I see the race Michael refers to (tlb_choose_channel may set head, which tlb_init_slave clears), although I was not able to reproduce it. I have updated his patch for the current netdev-2.6.git tree and added a version update. His original comment follows: Our systems have been crashing during testing of PCI HotPlug support in the various networking components. We've faulted in the bonding driver due to a bug in bond_alb.c:tlb_clear_slave() In that routine, the last modification to the TLB hash table is made without protection of the lock, allowing a race that can lead tlb_choose_channel() to select an invalid table element. -J Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Dan Williams 提交于
This patch allows the Atmel driver to work correctly with wpa_supplicant and other programs that require some conformance with WEXT-18. It should not affect current behavior of the driver. The patch does four things: 1) Implements SIOCSIWENCODEEXT, SIOCGIWENCODEEXT, SIOCSIWAUTH, and SIOCGIWAUTH calls for unencrypted and WEP operation 2) Accepts zero-filled addresses for SIOCSIWAP, which are legal and should turn off any previous forced WAP address 3) Sends association and de-association events to userspace at most of the appropriate times 4) Fixes erroneous order of CIPHER_SUITE_WEP_* arguments in one location which are actually unused anyway Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
Replace the MODULE_PARM usage in uli526x.c with module_param. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Kumar Gala 提交于
Make the driver produce the string used by phy_connect and have board specific code pass the integer mii bus id and phy device id for the specific controller instance. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Kumar Gala 提交于
Add the PHY_ID_FMT macro to ensure that the format of the id string used by a driver to match to its specific phy is consistent between the mdio_bus and the driver. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Kumar Gala 提交于
We can now have the gianfar mii platform device have a proper resource for the IO memory region for its registers. Previously we passed this information that the platform_data structure because we couldn't handle overlapping memory regions for platform devices. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Kumar Gala 提交于
Missing include of <linux/in.h> to get definition of IPPROTO_UDP. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 dann frazier 提交于
airo.c currently has MICSUPPORT enabled, which requires CONFIG_CRYPTO. A user reported a build failure which is due to the lack of a Kconfig dependency. See http://bugs.debian.org/344205. This patch makes Kconfig enforce this dependency. Signed-off-by: Ndann frazier <dannf@debian.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 ODonnell, Michael 提交于
We have identified two related bugs in the e100 driver. Both bugs are related to manipulation of the MDI control register. The first problem is that the Ready bit is being ignored when writing to the Control register; we noticed this because the Linux bonding driver would occasionally come to the spurious conclusion that the link was down when querying Link State. It turned out that by failing to wait for a previous command to complete it was selecting what was essentially a random register in the MDI register set. When we added code that waits for the Ready bit (as shown in the patch file below) all such problems ceased. The second problem is that, although access to the MDI registers involves multiple steps which must not be intermixed, nothing was defending against two or more threads attempting simultaneous access. The most obvious situation where such interference could occur involves the watchdog versus ioctl paths, but there are probably others, so we recommend the locking shown in our patch file. Signed-off-by: NMichael O'Donnell <Michael.ODonnell@stratus.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jens Axboe 提交于
There's a problem with the REQ_BLOCK_PC handling as well (bad ->data_len handling) where it could actually complete a request ahead of time. I suggest we just back this out for now, I will resubmit it later when I'm fully confident in it. This reverts commit 8672d571Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
Turn several drivers/serial/ semaphores-used-as-mutex into mutexes Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Arjan van de Ven 提交于
convert mfd and mmc to mutexes Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dominik Brodowski 提交于
With the "power/state" sysfs interface being deprecated, make another one available which is compatible to what was discussed on the linux PM mailinglist. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Add IDs for Sierra Aircard 55 CDMA 1xrtt Modem -- a CIS update is required for this card. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Al Viro 提交于
we always set ->SCp.ptr to physical address of buffer; for DMA that's just what we need, but we end up using it as virtual address in PIO case of esp_do_data(), with obvious breakage as soon as memory mapping becomes non-trivial. The fix is obvious. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
To be used by module_init() function should return int; same for functions that have "return -ENODEV;" in them, actually ;-) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Cast is not an lvalue Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
extern declaration before the static one Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-