[ Upstream commit 20edec38 ]

Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.

Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Fixes: 570d30c2 ("firmware: coreboot: Expose the coreboot table as a bus")
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NJulius Werner <jwerner@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c50535ed ]

alsa_conformance_test -C hw:0,4 -p 1024 --debug
would sometime show:
TIME_DIFF(s)    HW_LEVEL       READ              RATE
0.000095970         1024       1024    10670001.041992
0.042609555         1024       2048       24032.168372
0.021330364         1024       3072       48006.681930
0.021339559         1024       4096       47985.996337
The issue is that in dma pointer function we can have stale value
of the register for current descriptor of channel.
The register retains the number of the last descriptor that
was transferred.

Fix ensures that we report position, 0, till the one period worth of
data is transferred.  After one period of data, in handler of period
completion interrupt we update the config and correct value of descriptor
starts reflecting.
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cfb03be6 ]

The following lockdep splat was observed:

[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660]  ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743]  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
   :
[ 1223.524987] Chain exists of:
[ 1223.524987]   (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082]  Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630]        CPU0                    CPU1
[ 1223.645080]        ----                    ----
[ 1223.667404]   lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535]                                lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657]                                lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122]   lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095]  *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677]  #0:  (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310]  #1:  (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604]  #2:  (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000]  #3:  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]

In the ioat_shutdown() function:

	spin_lock_bh(&ioat_chan->prep_lock);
	set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
	del_timer_sync(&ioat_chan->timer);
	spin_unlock_bh(&ioat_chan->prep_lock);

According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.

The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.
Signed-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dcb569cf ]

This fixes a pair of problems in the Smack ptrace checks
related to checking capabilities. In both cases, as reported
by Lukasz Pawelczyk, the raw capability calls are used rather
than the Smack wrapper that check addition restrictions.
In one case, as reported by Jann Horn, the wrong task is being
checked for capabilities.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]

The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.

Fixes: be6b0c1b ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: NLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit aae733a3f46f5ef338fbdde26e14cbb205a23de0 ]

Fix the following sparse endianness warnings:

drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __le32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __le32 [usertype] <noident>
drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __be32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __be32 [usertype] <noident>

drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32
drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32

Fixes: 261ea058 ("crypto: caam - handle core endianness != caam endianness")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 726d75a6d243bf6730da3216f3592503f6f0f588 ]

Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC
and EP. Make sure driver probe does not fail in case the workaround is not
applied for RC mode in order to maintain DT backward compatibility.
Reported-by: NChris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: NVignesh R <vigneshr@ti.com>
[lorenzo.pieralisi@arm.com: reworded the log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 987d1e8d ]

If the ETB is already enabled in sysfs mode, the ETB reports
success even if a perf mode is requested. Fix this by checking
the requested mode.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4c1ef72e9b71a19fb405ebfcd37c0a5e16fa44ca ]

It is a serious driver defect to enable MSI or MSI-X more than once.  Doing
so may panic the kernel as in the stack trace below:

  Call Trace:
    sysfs_add_one+0xa5/0xd0
    create_dir+0x7c/0xe0
    sysfs_create_subdir+0x1c/0x20
    internal_create_group+0x6d/0x290
    sysfs_create_groups+0x4a/0xa0
    populate_msi_sysfs+0x1cd/0x210
    pci_enable_msix+0x31c/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ---[ end trace 11042e2848880209 ]---
    Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa056b4fa

We want to keep the WARN_ON() and stack trace so the driver can be fixed,
but we can avoid the kernel panic by returning an error.  We may still get
warnings like this:

  Call Trace:
    pci_enable_msix+0x3c9/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ------------[ cut here ]------------
    WARNING: at fs/sysfs/dir.c:526 sysfs_add_one+0xa5/0xd0()
    sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:01:00.1/msi_irqs'
Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com>
[bhelgaas: changelog, fix patch whitespace, remove !!]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 19c73a691ccf6fb2f12d4e9cf9830023966cec88 ]

Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr /mnt/f2fs/file

-----------------N- /mnt/f2fs/file

But actually, we expect the corrct result is:

-------A---------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_flags field during mount,
fix it.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5cd1f387 ]

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O inode_crtime /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. xfs_io -f /mnt/f2fs/file -c "fsync"
5. godown /mnt/f2fs
6. umount /mnt/f2fs
7. mount -t f2fs /dev/sdd /mnt/f2fs
8. xfs_io -f /mnt/f2fs/file -c "statx -r"

stat.btime.tv_sec = 0
stat.btime.tv_nsec = 0

This patch fixes to recover inode creation time fields during
mount.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 710bc78f829d014eca95ed7ccc4052bc064b1320 ]

This patch prevents user space mailbox request from doing chip reset if the
mailbox timed out. The chip reset is only reserved for the DPC thread to
ensure all mailbox requests are flushed properly. The DPC thread is
responsible for the flushing all MBs and chip reset.

Fixes: b2000805 ("scsi: qla2xxx: Flush mailbox commands on chip reset")
Cc: <stable@ger.kernel.org>
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 330e2d61cdd58363eb5e66b2e72f76fe3c5492e0 ]

When USB bus host controller root hub resumes from autosuspend,
it immediately tries to enter auto-suspend, but there can be a
scenario when root hub is resuming its usb2 ports, in that particular
case USB host controller auto suspend fails since it is busy
to resuming its usb2 ports.

This makes multiple failed cycles of auto-suspend until all usb2
ports of host controller root hub do not resume.

This patch uses USB core framework usb_hcd_start_port_resume,
usb_hcd_end_port_resume API's in order to  autoresume/autosuspend
root hub properly.
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fa72d847d68d7833b77a4bef944cf2c5baf56f49 ]

This function can fail so check its return value in nvmem_register()
and act accordingly.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit aa77e55d48124d0d78456eabf872fffb5decdbe1 ]

Test the correct value to see whether the PHY get failed.

Use devm_phy_get() instead of devm_phy_optional_get(), since it is
only called if phy name is given in devicetree and so should exist.
If failure when getting or linking PHY, put any PHYs which were
already got and unlink them.

Fixes: dfb80534 ("PCI: cadence: Add generic PHY support to host and EP drivers")
Reported-by: NColin King <colin.king@canonical.com>
Signed-off-by: NAlan Douglas <adouglas@cadence.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]

If we change the number of array's device after device is removed from array,
then add the device back to array, we can see that device is added as active
role instead of spare which we expected.

Please see the below link for details:
https://marc.info/?l=linux-raid&m=153736982015076&w=2

This is caused by that we prefer to use device's previous role which is
recorded by saved_raid_disk, but we should respect the new number of
conf->raid_disks since it could be changed after device is removed.
Reported-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Tested-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f18b2b83 ]

If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.

Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around.  This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.

Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bb80e4fa57eb75ebd64ae9be4155da6d12c1a997 ]

The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has
its own compatible string. Add support for that.

Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible")
Acked-by: NCristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 41ee1ea21052583eaf5487dfa0d0c907c9667548 ]

There's a race with root hub resume, when using external vbus supply.
Root hub gets resumed, but runtime pm autosuspend runs as external vbus
supply isn't enabled. So, host never exit from power down properly.
Initialize vbus external supply before, rater that after hub resume.

Fixes: 531ef5eb ("usb: dwc2: add support for host mode external
vbus supply")
Tested-by: NArtur Petrosyan <arturp@synopsys.com>
Acked-by: NMinas Harutyunyan <hminas@synopsys.com>
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5aa678c7fd5371769efde30763fb43a43a118cd0 ]

dwc2_vbus_supply_exit() may call regulator_disable(). It shouldn't be
called with interrupts disabled as it might sleep.
This is seen with DEBUG_ATOMIC_SLEEP=y.

Fixes: 531ef5eb ("usb: dwc2: add support for host mode external
vbus supply")
Tested-by: NArtur Petrosyan <arturp@synopsys.com>
Acked-by: NMinas Harutyunyan <hminas@synopsys.com>
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7bae48b22c8d38c5cd50f52b6e15d134e2bb3935 ]

The PDC irqchp can convert a falling edge or level low interrupt to a
rising edge or level high interrupt at the GIC. We just need to setup
the GIC correctly. Set up the interrupt type for the IRQ_TYPE_EDGE_BOTH
as IRQ_TYPE_EDGE_RISING at the GIC.

Fixes: f55c73ae ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Reported-by: NEvan Green <evgreen@chromium.org>
Reviewed-by: NEvan Green <evgreen@chromium.org>
Signed-off-by: NLina Iyer <ilina@codeaurora.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ef739b2175dde9c05594f768cb78149f1ce2ac36 ]

On a fresh connection, an RPC/RDMA client is supposed to send only
one RPC Call until it gets a credit grant in the first RPC Reply
from the server [RFC 8166, Section 3.3.3].

There is a bug in the Linux client's credit accounting mechanism
introduced by commit e7ce710a ("xprtrdma: Avoid deadlock when
credit window is reset"). On connect, it simply dumps all pending
RPC Calls onto the new connection.

Servers have been tolerant of this bad behavior. Currently no server
implementation ever changes its credit grant over reconnects, and
servers always repost enough Receives before connections are fully
established.

To correct this issue, ensure that the client resets both the credit
grant _and_ the congestion window when handling a reconnect.

Fixes: e7ce710a ("xprtrdma: Avoid deadlock when credit ... ")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6299cf9e ]

We enable power management automatically for bridges where
pci_bridge_d3_possible() returns true. However, these bridges may have
ACPI methods such as _DSW that need to be called before D3 entry. For
example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare
D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is
not enabled _DSW method is never called and the port does not enter
D3cold properly consuming more power than necessary.

Users can work this around by writing "enabled" to "wakeup" sysfs file
under the device in question but that is not something an ordinary user
is expected to do.

Since we already automatically enable power management for PCIe ports
with ->bridge_d3 set extend that to enable wake for them as well,
assuming the port has any ACPI wakeup related objects implemented in the
namespace (adev->wakeup.flags.valid is true). This ensures the necessary
ACPI methods get called at appropriate times and allows the root port in
Thinkpad X1 Carbon 6th to go into D3cold.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 11924ba5e671d6caef1516923e2bd8c72929a3fe ]

When adding a VMCI resource, the check for an existing entry
would ignore that the new entry could be a wildcard. This could
result in multiple resource entries that would match a given
handle. One disastrous outcome of this is that the
refcounting used to ensure that delayed callbacks for VMCI
datagrams have run before the datagram is destroyed can be
wrong, since the refcount could be increased on the duplicate
entry. This in turn leads to a use after free bug. This issue
was discovered by Hangbin Liu using KASAN and syzkaller.

Fixes: bc63dedb ("VMCI: resource object implementation")
Reported-by: NHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NVishnu Dasa <vdasa@vmware.com>
Signed-off-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 25355252607ca288f329ee033f387764883393f6 ]

A cpumask structure on the stack can cause a warning with
CONFIG_NR_CPUS=8192 (e.g. Ubuntu 16.04 and 18.04 use this):

drivers/hv//channel_mgmt.c: In function ‘init_vp_index’:
drivers/hv//channel_mgmt.c:702:1: warning: the frame size of 1032 bytes
  is larger than 1024 bytes [-Wframe-larger-than=]

Nowadays it looks most distros enable CONFIG_CPUMASK_OFFSTACK=y, and
hence we can work around the warning by using cpumask_var_t.
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fb7d70db ]

When running fault injection test, I hit somewhat wrong behavior in f2fs_gc ->
gc_data_segment():

0. fault injection generated some PageError'ed pages

1. gc_data_segment
 -> f2fs_get_read_data_page(REQ_RAHEAD)

2. move_data_page
 -> f2fs_get_lock_data_page()
  -> f2f_get_read_data_page()
   -> f2fs_submit_page_read()
    -> submit_bio(READ)
  -> return EIO due to PageError
  -> fail to move data
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]

For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:

  * Active: Security chip is functional
  * Inactive: Security chip is visible, but is not functional
  * Disabled: Security chip is hidden and is not functional

When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.

Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  tpm tpm0: TPM is disabled/deactivated (0x6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random

Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.

In that case the kernel log is cleaner and less confusing for users, i.e:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: TPM is disabled/deactivated (0x6)
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
Reported-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 554fab6dbf20ee7298ed2d4e8398b85e6058abb7 ]

Currently when requesting a specific voltage or current through
the psy interface, for PPS, when reading back from that interface
the values will always be the same as previously given, if the
request was successful. However PPS only allows for 20mV voltage
steps and 50mA current steps, and the psy class expects microvolt
and micro amp requests, so inbetween values can be provided through
this interface. Really when reading back the true values negotiated
should be given, and not the ones originally asked for.

To report the actual values negotiated with the Source, the values
stored are now rounded down to the relevant step units prior to
building the PPS request, so that those values are later correctly
reported through the psy interface. In addition this improves the
adjustments made to meet the operating power requirements of the
platform, which previously could have been slightly out due to not
using valid PPS units of voltage and current.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0652d4b6b56f73c81abbdbc7e26f772cb2dfe370 ]

The IRQ physical address is allocated from region 0, rather than
the highest region. Update the driver to reserve this region in
the bitmap and to use region 0 for all types of interrupt.

This corrects a problem which prevents the interrupt being
signalled correctly if using the first address in the AXI region,
since an offset of zero will always be mapped to region 0.

Fixes: 37dddf14 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: NAlan Douglas <adouglas@cadence.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 074d6f32689ce05a084b6fa3db38445745bf11cc ]

The Mediatek's host controller has two slots, each with its own control
registers. The host driver needs to identify what slot is connected to
what port in order to access the device's configuration space.

Current code retrieving slot connected to a given endpoint device.

Assuming each slot is connected to one endpoint device as below:

                host bridge
  bus 0 --> __________|_______
           |                  |
           |                  |
         slot 0             slot 1
  bus 1 -->|        bus 2 --> |
           |                  |
         EP 0               EP 1

During PCI enumeration, system software will scan all the PCI devices on
every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an
endpoint to its slot is erroneous in that the devfn does not contain the
hierarchical bus numbering in it. In order to match an endpoint with its
slot (and related port), the PCI tree must be walked up to the root bus
(where the root ports are situated) and then the PCI_SLOT(devfn)
matching logic can be correctly applied for matching.

This patch fixes the mtk_pcie_find_port() slot matching logic by adding
appropriate PCI tree walking code to retrieve the slot/port a given
endpoint is connected to.
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 325b9313ec3be56c8e2fe03f977fee19cec75820 ]

atmel,oc-gpio is optional. Request its irq only when atmel,oc is set
in device tree.

devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its
return value for NULL before error, because it is more probable that
atmel,oc is not set.

This fixes the following errors on boards where atmel,oc is not set in
device tree:
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d455f29f6d76a5f94881ca1289aaa1e90617ff5d ]

Fix possible recursive lock warning. Its a false warning as the locks are
part of two differnt HW Queue data structure - cmdq and creq. Debug kernel
is throwing the following warning and stack trace.

[  783.914967] ============================================
[  783.914970] WARNING: possible recursive locking detected
[  783.914973] 4.19.0-rc2+ #33 Not tainted
[  783.914976] --------------------------------------------
[  783.914979] swapper/2/0 is trying to acquire lock:
[  783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.914999]
but task is already holding lock:
[  783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915013]
other info that might help us debug this:
[  783.915016]  Possible unsafe locking scenario:

[  783.915019]        CPU0
[  783.915021]        ----
[  783.915034]   lock(&(&hwq->lock)->rlock);
[  783.915035]   lock(&(&hwq->lock)->rlock);
[  783.915037]
 *** DEADLOCK ***

[  783.915038]  May be due to missing lock nesting notation

[  783.915039] 1 lock held by swapper/2/0:
[  783.915040]  #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915044]
stack backtrace:
[  783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33
[  783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[  783.915048] Call Trace:
[  783.915049]  <IRQ>
[  783.915054]  dump_stack+0x90/0xe3
[  783.915058]  __lock_acquire+0x106c/0x1080
[  783.915061]  ? sched_clock+0x5/0x10
[  783.915063]  lock_acquire+0xbd/0x1a0
[  783.915065]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915069]  _raw_spin_lock_irqsave+0x4a/0x90
[  783.915071]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915073]  bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915078]  tasklet_action_common.isra.17+0x197/0x1b0
[  783.915081]  __do_softirq+0xcb/0x3a6
[  783.915084]  irq_exit+0xe9/0x100
[  783.915085]  do_IRQ+0x6a/0x120
[  783.915087]  common_interrupt+0xf/0xf
[  783.915088]  </IRQ>

Use nested notation for the spin_lock to avoid this warning.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ed51efd2 ]

In the failure path, nq->bar_reg_iomem gets accessed without
initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the
initialization is complete.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b103 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ]

IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:

[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G           O      4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888]  dump_stack+0x9a/0xeb
[ 1083.036031]  print_address_description+0xe3/0x2e0
[ 1083.036213]  kasan_report+0x18a/0x2e0
[ 1083.036356]  ? __ip_options_echo+0xf08/0x1310
[ 1083.036522]  __ip_options_echo+0xf08/0x1310
[ 1083.036688]  icmp_send+0x7b9/0x1cd0
[ 1083.036843]  ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018]  ? netif_schedule_queue+0x5/0x200
[ 1083.037180]  ? debug_show_all_locks+0x310/0x310
[ 1083.037341]  ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519]  ? debug_locks_off+0x11/0x80
[ 1083.037673]  ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841]  ? check_flags.part.27+0x450/0x450
[ 1083.037995]  ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169]  ? debug_locks_off+0x11/0x80
[ 1083.038318]  ? skb_dequeue+0x10e/0x1a0
[ 1083.038476]  ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642]  ? netif_schedule_queue+0xa8/0x200
[ 1083.038820]  ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996]  ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174]  process_one_work+0x912/0x1830
[ 1083.039336]  ? wq_pool_ids_show+0x310/0x310
[ 1083.039491]  ? lock_acquire+0x145/0x3a0
[ 1083.042312]  worker_thread+0x87/0xbb0
[ 1083.045099]  ? process_one_work+0x1830/0x1830
[ 1083.047865]  kthread+0x322/0x3e0
[ 1083.050624]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354]  ret_from_fork+0x3a/0x50

For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB

[  762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[  762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[  762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[  762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[  762.140269] ==================================================================
[  762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[  762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[  762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7
Signed-off-by: NDenis Drozdov <denisd@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e54b6a3bcd1ec972b25a164bdf495d9e7120b107 ]

Add missing check for failure of cm_init_av_by_path

Fixes: e1444b5a ("IB/cm: Fix automatic path migration support")
Reported-by: NSlava Shwartsman <slavash@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]

If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.

Fixes: 35c4cbb1 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ]

In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.

This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Acked-by: NSumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cfb634fe ]

According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit
qualification field for debug exceptions are reserved (cleared to
0). However, the SDM is incorrect about bit 16 (corresponding to
DR6.RTM). This bit should be set if a debug exception (#DB) or a
breakpoint exception (#BP) occurred inside an RTM region while
advanced debugging of RTM transactional regions was enabled. Note that
this is the opposite of DR6.RTM, which "indicates (when clear) that a
debug exception (#DB) or breakpoint exception (#BP) occurred inside an
RTM region while advanced debugging of RTM transactional regions was
enabled."

There is still an issue with stale DR6 bits potentially being
misreported for the current debug exception.  DR6 should not have been
modified before vectoring the #DB exception, and the "new DR6 bits"
should be available somewhere, but it was and they aren't.

Fixes: b96fb439 ("KVM: nVMX: fixes to nested virt interrupt injection")
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9607871f ]

The following code in the linux/ndctl header file:

	static inline const char *nvdimm_bus_cmd_name(unsigned cmd)
	{
		static const char * const names[] = {
			[ND_CMD_ARS_CAP] = "ars_cap",
			[ND_CMD_ARS_START] = "ars_start",
			[ND_CMD_ARS_STATUS] = "ars_status",
			[ND_CMD_CLEAR_ERROR] = "clear_error",
			[ND_CMD_CALL] = "cmd_call",
		};

		if (cmd < ARRAY_SIZE(names) && names[cmd])
			return names[cmd];
		return "unknown";
	}

is broken in a number of ways:

 (1) ARRAY_SIZE() is not generally defined.

 (2) g++ does not support "non-trivial" array initialisers fully yet.

 (3) Every file that calls this function will acquire a copy of names[].

The same goes for nvdimm_cmd_name().

Fix all three by converting to a switch statement where each case returns a
string.  That way if cmd is a constant, the compiler can trivially reduce it
and, if not, the compiler can use a shared lookup table if it thinks that is
more efficient.

A better way would be to remove these functions and their arrays from the
header entirely.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f4bb7704699beee9edfbee875daa9089c86cf724 ]

With commit 10e5e375 ("scsi: ufs: Add clock ungating to a separate
workqueue"), clock gating work was moved to a separate work queue with
WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim
context. Unfortunately, clk_gating.gate_work was left queued via
schedule_delayed_work, which is a system workqueue that does not have
WQ_MEM_RECLAIM set.  Because ufshcd_ungate_work attempts to cancel
gate_work, the following warning appears:

[   14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work
[   14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118
[   14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1
[   14.212437] Hardware name: Google Cheza (rev1) (DT)
[   14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work
[   14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000
[   14.229195] PC is at check_flush_dependency+0x110/0x118
[   14.234569] LR is at check_flush_dependency+0x110/0x118
[   14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9
[   14.333050] Call trace:
[   14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118
[   14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc
[   14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94
[   14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8
[   14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30
[   14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0
[   14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690
[   14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338
[   14.475361] [<ffffff80080d527c>] kthread+0x120/0x130
[   14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18

The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM
work queue as the ungate_work.

Fixes: 10e5e375 ("scsi: ufs: Add clock ungating to a separate workqueue")
Signed-off-by: NEvan Green <evgreen@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>