- 09 6月, 2006 1 次提交
-
-
由 David Howells 提交于
As fs/nfs/inode.c is rather large, heterogenous and unwieldy, the attached patch splits it up into a number of files: (*) fs/nfs/inode.c Strictly inode specific functions. (*) fs/nfs/super.c Superblock management functions for NFS and NFS4, normal access, clones and referrals. The NFS4 superblock functions _could_ move out into a separate conditionally compiled file, but it's probably not worth it as there're so many common bits. (*) fs/nfs/namespace.c Some namespace-specific functions have been moved here. (*) fs/nfs/nfs4namespace.c NFS4-specific namespace functions (this could be merged into the previous file). This file is conditionally compiled. (*) fs/nfs/internal.h Inter-file declarations, plus a few simple utility functions moved from fs/nfs/inode.c. Additionally, all the in-.c-file externs have been moved here, and those files they were moved from now includes this file. For the most part, the functions have not been changed, only some multiplexor functions have changed significantly. I've also: (*) Added some extra banner comments above some functions. (*) Rearranged the function order within the files to be more logical and better grouped (IMO), though someone may prefer a different order. (*) Reduced the number of #ifdefs in .c files. (*) Added missing __init and __exit directives. Signed-Off-By: NDavid Howells <dhowells@redhat.com>
-
- 21 3月, 2006 4 次提交
-
-
由 Trond Myklebust 提交于
Same callback hierarchy inversion as for the NFS write calls. This patch is not strictly speaking needed by the O_DIRECT code, but avoids confusing differences between the asynchronous read and write code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This patch inverts the callback hierarchy for NFS write calls. Instead of having the NFSv2/v3/v4-specific code set up the RPC callback ops, we allow the original caller to do so. This allows for more flexibility w.r.t. how to set up and tear down the nfs_write_data structure while still allowing the NFSv3/v4 code to perform error handling. The greater flexibility is needed by the asynchronous O_DIRECT code, which wants to be able to hold on to the original nfs_write_data structures after the WRITE RPC call has completed in order to be able to replay them if the COMMIT call determines that the server has rebooted. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: replace rpc_call() helper with direct call to rpc_call_sync. This makes NFSv2 and NFSv3 synchronous calls more computationally efficient, and reduces stack consumption in functions that used to invoke rpc_call more than once. Test plan: Compile kernel with CONFIG_NFS enabled. Connectathon on NFS version 2, version 3, and version 4 mount points. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Make an inode or an nfs_server struct available in the logic that handles JUKEBOX/DELAY type errors so the NFS client can account for them. This patch is split out from the main nfs iostat patch to highlight minor architectural changes required to support this statistic. Test plan: None. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 1月, 2006 2 次提交
-
-
由 J. Bruce Fields 提交于
Thanks to Ed Keizer for bug and root cause. He says: "... we could only mount the top-level Solaris share. We could not mount deeper into the tree. Investigation showed that Solaris allows UNIX authenticated FSINFO only on the top level of the share. This is a problem because we share/export our home directories one level higher than we mount them. I.e. we share the partition and not the individual home directories. This prevented access to home directories." We still may need to try auth_sys for the case where the client doesn't have appropriate credentials. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 10月, 2005 3 次提交
-
-
由 Trond Myklebust 提交于
Since we almost always call nfs_end_data_update() after we called nfs_refresh_inode(), we now end up marking the inode metadata as needing revalidation immediately after having updated it. This patch rearranges things so that we mark the inode as needing revalidation _before_ we call nfs_refresh_inode() on those operations that need it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 10月, 2005 1 次提交
-
-
由 Trond Myklebust 提交于
Make NFSv4 return the fully initialized file pointer with the stateid that it created in the lookup w/intent. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 9月, 2005 1 次提交
-
-
由 Nishanth Aravamudan 提交于
Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use helper functions to convert between human time units and jiffies rather than constant HZ division to avoid rounding errors. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 8月, 2005 1 次提交
-
-
由 Trond Myklebust 提交于
When the client performs an exclusive create and opens the file for writing, a Netapp filer will first create the file using the mode 01777. It does this since an NFSv3/v4 exclusive create cannot immediately set the mode bits. The 01777 mode then gets put into the inode->i_mode. After the file creation is successful, we then do a setattr to change the mode to the correct value (as per the NFS spec). The problem is that nfs_refresh_inode() no longer updates inode->i_mode, so the latter retains the 01777 mode. A bit later, the VFS notices this, and calls remove_suid(). This of course now resets the file mode to inode->i_mode & 0777. Hey presto, the file mode on the server is now magically changed to 0777. Duh... Fixes http://bugzilla.linux-nfs.org/show_bug.cgi?id=32Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2005 4 次提交
-
-
由 Andreas Gruenbacher 提交于
Attach acls to inodes in the icache to avoid unnecessary GETACL RPC round-trips. As long as the client doesn't retrieve any acls itself, only the default acls of exiting directories and the default and access acls of new directories will end up in the cache, which preserves some memory compared to always caching the access and default acl of all files. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andreas Gruenbacher 提交于
NFSv3 has no concept of a umask on the server side: The client applies the umask locally, and sends the effective permissions to the server. This behavior is wrong when files are created in a directory that has a default ACL. In this case, the umask is supposed to be ignored, and only the default ACL determines the file's effective permissions. Usually its the server's task to conditionally apply the umask. But since the server knows nothing about the umask, we have to do it on the client side. This patch tries to fetch the parent directory's default ACL before creating a new file, computes the appropriate create mode to send to the server, and finally sets the new file's access and default acl appropriately. Many thanks to Buck Huppmann <buchk@pobox.com> for sending the initial version of this patch, as well as for arguing why we need this change. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andreas Gruenbacher 提交于
This adds acl support fo nfs clients via the NFSACL protocol extension, by implementing the getxattr, listxattr, setxattr, and removexattr iops for the system.posix_acl_access and system.posix_acl_default attributes. This patch implements a dumb version that uses no caching (and thus adds some overhead). (Another patch in this patchset adds caching as well.) Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
ACL support will require supporting additional inode operations in v4 (getxattr, setxattr, listxattr). This patch allows different protocol versions to support different inode operations by adding a file_inode_ops to the nfs_rpc_ops (to match the existing dir_inode_ops). Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-