Pending page flips must be cancelled when closing the device, otherwise
their completion at next vblank will result in nasty effects, including
possible oopses due to resources required to complete the page flip
being freed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm can't use drm_irq_install() and drm_irq_uninstall() as it
delegates IRQ handling to the omapdss driver. However, the code still
declares IRQ-related operations used by the DRM IRQ helpers, and calls
them indirectly.

Simplify the implementation by calling the functions directly or
inlining them. The irq_enabled checks can then also be simplified as
the call stacks guarantees that omap_drm_irq_install() and
omap_drm_irq_uninstall() will never run concurrently.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The old_fb field is only used to indicate whether a page flip is
pending. Turn it into a bool named flip_pending. Rename event and
page_flip_work to flip_event and flip_work for consistency.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The operation is called page_flip, rename its implementation
accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm driver implements a mechanism to apply new settings (due to
plane update, plane disable, plane property set, CRTC mode set or CRTC
DPMS) asynchronously. While this improves performance, it adds a level
of complexity that makes transition to the atomic update API close to
impossible. Furthermore the atomic update API requires part of the apply
operations to be synchronous (such as pinning the framebuffers), so the
current implementation needs to be changed.

Simplify the CRTC and plane code by making updates synchronous to
prepare for the switch to the atomic update API. Asynchronous update
will be implemented in a second step.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Rotation is a standard property, store it in
dev->mode_config.rotation_property. While at it, extract the properties
initialization code to a separate function instead of running it for
every plane.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Merge tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel into drm-next

firmware name fix

* tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/skl: Fix DMC API version in firmware file name

Merge tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- Make the reset wavefronts action be per process per device instead of
  per process, because one device can be stuck but the other one won't be

- Add some missing properties to the CZ device_info structure

- Rename symbols to not have CONFIG_ prefix

- Some more cleanups and debug prints

* tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: remove not used defines from cik_regs.h
  drm/amdkfd: Add missing properties to CZ device info
  drm/amdkfd: make reset wavefronts per process per device
  drm/amdkfd: add debug print to kfd_events.c
  drm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols

Merge branch '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

Mainly it is fixing timing on HDMI to be compliant with CEA-861E spec.

* '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm/sti: vtg fix CEA-861E video format timing error
  drm/sti: hdmi fix CEA-861E video format timing error
  drm/sti: VTG interrupt names are badly displayed
  drm/sti: missing first pixel column on HDMI display
  drm/sti: correctly test devm_ioremap() return

The goto is correct, and we never reach the return statement so just
delete the dead code.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

virtio_gpu_alloc_object() returns an error pointer, it never returns
NULL.

Fixes: dc5698e8 ('Add virtio gpu driver.')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

More fixes for amdgpu for 4.2.  We've integrated Jerome's comments
about the interface among other things.  I'll be on vacation next week
so Christian will be handling any updates next week.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  drm/amdgpu: fix a amdgpu_dpm=0 bug
  drm/amdgpu: don't enable/disable display twice on suspend/resume
  drm/amdgpu: fix UVD/VCE VM emulation
  drm/amdgpu: enable vce powergating
  drm/amdgpu/iceland: don't call smu_init on resume
  drm/amdgpu/tonga: don't call smu_init on resume
  drm/amdgpu/cz: don't call smu_init on resume
  drm/amdgpu: update to latest gfx8 golden register settings
  drm/amdgpu: whitespace cleanup in gmc8 golden regs
  drm/admgpu: move XDMA golden registers to dce code
  drm/amdgpu: fix the build on big endian
  drm/amdgpu: cleanup UAPI comments
  drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
  drm/amdgpu: remove the VI hardware semaphore in ring sync
  drm/amdgpu: set the gfx config properly for all CZ variants (v2)
  drm/amdgpu: also print the pci revision when printing the pci ids
  drm/amdgpu: cleanup VA IOCTL
  drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
  drm/amdgpu: fix amdgpu_vm_bo_map
  drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
  ...

Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

We were doing it in the common code and in the IP specific code.
Remove the IP specific code.  The common code handles the
ordering properly.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: NSonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: NSonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: NSonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Already moved other display registers.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some leftover copy and pastes from radeon that never
got updated.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No functional change.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Not used.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDavid Zhang <david1.zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Need to adjust the number of CUs and RBs.

v2: get proper values
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver makes use of this information so print if to aid in
debugging.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the unnecessary returned status and make the IOCTL write only.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

We need to reset the bo_va address, otherwise new mappings
wouldn't be updated in the page table.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

HDMI analyzer tests showed that Vsync and Hsync signal were not
compliant with the HDMI protocol.

HDMI_DELAY should be taken into account in the VTG Vsync
programming to reflect the 6 pixels shift introduced in the VTG
Hsync programming.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

HDMI analyzer tests showed that Vsync and Hsync signal were not
compliant with the HDMI protocol.

The first active pixel of a line is defined by HDMI_ACTIVE_VID_XMIN.
The last active pixel of a line is defined by HDMI_ACTIVE_VID_XMAX.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

VTG interrupt names are badly displayed using "cat /proc/interrupts".
Simply use the VTG device name while registering the VTG interrupts
to fix it.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

VTG programing updated to fix the shift of one column observed
on HDMI display.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

In case of error, the function devm_ioremap_nocache() returns NULL
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds two missing properties initializations to the device
info structure of CZ.

As we don't have CZ support yet, it isn't critical, but its important to
fix this now instead of forgetting about it later.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This commit moves the reset wavefront flag to per process per device
data structure, so we can support multiple devices.
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>