A negative status has the "do not retry" bit set, which makes it not
retryable.  Use a fake status that can potentially be retried on reset.

An aborted command's status is overridden by the timeout handler so
that it won't be retried, which is necessary to keep initialization from
getting into a reset loop.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The tag set queue depth needs to be one less than the h/w queue depth
so we don't wrap the circular buffer. This conforms to the specification
defined "Full Queue" condition.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Nothing pci specific about them and We'll need them exported
in other transports too.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Requests enabling pcie aer support. Shuts down the controller on error
detected with io frozen state prior to requesting slot reset; resumes
controller after reset completes.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Merge the two per-request structures in the nvme driver into a single
one.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We need to move freeing of resources to the ->complete handler to ensure
they are also freed when we cancel the command.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that all commands are executed as block layer requests we can remove the
internal completion in the NVMe driver.  Note that we can simply call
blk_mq_complete_request to abort commands as the block layer will protect
against double copletions internally.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

AEN requests are different from other requests in that they don't time out
or can easily be cancelled.  Because of that we should not use the blk-mq
infrastructure but just special case them in the completion path.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

And remove the now unused nvme_submit_cmd helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We'll need them in other places later.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The number in tag_set->queue depth includes the reserved tags.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We don't want to allow new references to open on a device that is
removed. This ties the lifetime of these handles to the physical device's
presence rather than to the open reference count.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Removes all usage of the global work queue so work can't be
scheduled on two different work queues, and removes nvme's work queue
singlethreadedness so controllers can be driven in parallel.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[hch: keep the dead controller removal on the system workqueue to avoid
 deadlocks]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The NVMe 1.1 specification provides an identify mode to return a
list of active namespaces. This is more efficient to discover which
namespace identifiers are active on a controller, providing potentially
significant improvement in scan time for controllers with sparesly
populated namespaces.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[hch: add quirk for the broken Qemu Identify implementation.  To be relaxed
 later]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

There is no lock to sychronize access to the abort_limit field of
struct nvme_ctrl, so switch it to an atomic_t.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Compared to the kthread this gives us multiple call prevention for free.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If we're using two work queues we're always going to run into races where
one item is tearing down what the other one is initializing.  So insted
merge the two work queues, and let the old probe_work also tear the
controller down first if it was alive.  Together with the better detection
of the probe path using a flag this gives us a properly serialized
reset/probe path that also doesn't accidentally trigger when two commands
time out and the second one tries to reset the controller while the first
reset is still in progress.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Otherwise we're never going to complete a command when it is restarted just
after we completed all other outstanding commands in nvme_clear_queue.

The controller must be disabled prior to completing a presumed lost
command, do this by directly shutting down the controller before
queueing the reset work, and return EH_HANDLED from the timeout handler
after we shut the controller down.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[hch: split and rebase]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Don't delete the controller from dev_list before queuing a reset, instead
just check for it being reset in the polling kthread.  This allows to remove
the dev_list_lock in various places, and in addition we can simply rely on
checking the queue_work return value to see if we could reset a controller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

To properly document how we are using a negative Linux error value to
communicate request cancellations inside the driver.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We want to be able to return bettern error values frmo nvme_timeout, which
is significantly easier if the two functions are merged.  Also clean up and
reduce the printk spew so that we only get one message per abort.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

There is nothing it protects, but it makes lockdep unhappy in many different
ways.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NKeith Busch <keith.busch@intel.com>
[hch: split from a larger patch]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Without this we can easily get bad derferences on nvmeq->d_db when the nvme
kthread tries to poll the CQs for controllers that are in half initialized
state.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Half initialized queues due to kernel error returns or timeout are still a
good reason to give up on initializing a controller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Split out a helper that just issues the Set Features and interprets the
result which can go to common code, and document why we are ignoring
non-timeout error returns in the PCIe driver.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

For this we need to add a proper controller init routine and a list of
all controllers that is in addition to the list of PCIe controllers,
which stays in pci.c.  Note that we remove the sysfs device when the
last reference to a controller is dropped now - the old code would have
kept it around longer, which doesn't make much sense.

This requires a new ->reset_ctrl operation to implement controleller
resets, and a new ->write_reg32 operation that is required to implement
subsystem resets.  We also now store caches copied of the NVMe compliance
version and the flag if a controller is attached to a subsystem or not in
the generic controller structure now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
[Fixes for pr merge]
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The namespace scanning code has been mostly generic already, we just
need to store a pointer to the tagset in the nvme_ctrl structure, and
add a method to check if a controller is I/O incapable.  The latter
will hopefully be replaced by a proper controller state machine soon.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
[Fixed pr conflicts]
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We want to record the identify and CAP values even if no I/O queue
is available.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

And add the 64-bit register read operation for it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Remove the calculation of all the bits written into the CC register into
nvme_enable_ctrl, so that they can be moved into the core NVMe driver in
the future.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add an enum for all workarounds not in the spec and identify the affected
controllers at probe time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This moves the block_device_operations over to common code mostly
as-is.  The only change is that the ns and ctrl refcounting got some
small refcounting to have wrappers around the kref_put operations.

A new free_ctrl operation is added to allow the PCI driver to free
it's ressources on the final drop.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
[Moved the integrity and pr changes due to merge conflict]
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Use the integrity API to pass through metadata from userspace.  For PI
enabled devices this means that we now validate the reftag, which seems
like an unintentional ommission in the old code.

Thanks to Keith Busch for testing and fixes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
[Skip metadata setup on admin commands]
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add a separate nvme_submit_user_cmd for commands that directly DMA
to or from userspace.  We'll add metadata support to that soon and
the common version would become too messy.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

And mark them inline so that we don't slow down the I/O submission path by
having to turn it into a forced out of line call.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

And mark it inline so that we don't slow down the completion path by
having to turn it into a forced out of line call.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>