- 28 7月, 2017 12 次提交
-
-
由 Arnd Bergmann 提交于
We get a link error trying to access the w100fb_gpio_read/write functions from the platform when the driver is a loadable module or not built-in, so the platform already uses 'select' to hard-enable the driver. However, that fails if the framebuffer subsystem is disabled altogether. I've considered various ways to fix this properly, but they all seem like too much work or too risky, so this simply adds another 'select' to force the subsystem on as well. Fixes: 82427de2 ("ARM: pxa: PXA_ESERIES depends on FB_W100.") Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
An empty macro definition can cause unexpected behavior, in case of the ixp4xx ioport_unmap, we get two warnings: drivers/net/wireless/marvell/libertas/if_cs.c: In function 'if_cs_release': drivers/net/wireless/marvell/libertas/if_cs.c:826:3: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] ioport_unmap(card->iobase); drivers/vfio/pci/vfio_pci_rdwr.c: In function 'vfio_pci_vga_rw': drivers/vfio/pci/vfio_pci_rdwr.c:230:15: error: the omitted middle operand in ?: will always be 'true', suggest explicit middle operand [-Werror=parentheses] is_ioport ? ioport_unmap(iomem) : iounmap(iomem); This uses an inline function to define the macro in a safer way. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NKrzysztof Halasa <khalasa@piap.pl>
-
由 Arnd Bergmann 提交于
Just like ARCH_MULTIPLATFORM, we want to use ARM_PATCH_PHYS_VIRT when possible, but that fails for NOMMU or XIP_KERNEL configurations. Using 'imply' instead of 'select' gets this right and only uses the symbol when we don't have to hardcode the address anyway. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NAlexander Sverdlin <alexander.sverdlin@gmail.com>
-
由 Arnd Bergmann 提交于
This variable may be used by some devices that each have their on Kconfig symbol, or by none of them, and that causes a build warning: arch/arm/mach-mmp/devices.c:241:12: error: 'usb_dma_mask' defined but not used [-Werror=unused-variable] Marking it __maybe_unused avoids the warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
The omap_generic_init() and omap_hwmod_init_postsetup() functions are used in the initialization for all OMAP2+ SoC types, but in the extreme case that those are all disabled, we get a warning about unused code: arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function] arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function] This annotates both as __maybe_unused to shut up that warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
-
由 Arnd Bergmann 提交于
The osk_mistral_init() contains code that is only compiled when CONFIG_PM is set, but it uses a variable that is declared outside of the #ifdef: arch/arm/mach-omap1/board-osk.c: In function 'osk_mistral_init': arch/arm/mach-omap1/board-osk.c:513:7: warning: unused variable 'ret' [-Wunused-variable] This removes the #ifdef around the user of the variable, make it always used. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Suggested-by: NTony Lindgren <tony@atomide.com> Acked-by: NAaro Koskinen <aaro.koskinen@iki.fi>
-
由 Arnd Bergmann 提交于
sirfsoc_init_late is called by each of the three individual SoC definitions, but in a randconfig build, we can encounter a situation where they are all disabled: arch/arm/mach-prima2/common.c:18:123: warning: 'sirfsoc_init_late' defined but not used [-Wunused-function] While that is not a useful configuration, the warning also doesn't help, so this patch marks the function as __maybe_unused to let the compiler know it is there intentionally. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
ixp4xx defines the arguments to its __indirect_writesb() and other functions as pointers to fixed-size data. This is not necessarily wrong, and it works most of the time, but it causes warnings in at least one driver: drivers/net/ethernet/smsc/smc91x.c: In function 'smc_rcv': drivers/net/ethernet/smsc/smc91x.c:495:21: error: passing argument 2 of '__indirect_readsw' from incompatible pointer type [-Werror=incompatible-pointer-types] SMC_PULL_DATA(lp, data, packet_len - 4); All other definitions of the same functions pass void pointers, so doing the same here avoids the warnings. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NKrzysztof Halasa <khalasa@piap.pl>
-
由 Arnd Bergmann 提交于
The modem pm handler in the ams-delta board uses regulator_enable() but does not check for a successful return code: board-ams-delta.c:521:3: error: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Werror=unused-result] It is not easy to propagate that return code to the callers in uart_configure_port/uart_suspend_port/uart_resume_port, unless we change all UART drivers, and it is unclear what those would do with the return code. Instead, this patch uses a runtime warning to replace the compiletime warning. I have checked that the regulator in question is hardcoded to a fixed-voltage GPIO regulator, and that should never fail to get enabled if I understand the code right. Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NAaro Koskinen <aaro.koskinen@iki.fi> Link: https://patchwork.kernel.org/patch/8391981/Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
The RAM_SIZE macro in mach/hardware.h conflicts with macros of the same name in multiple drivers, leading to annoying build warnings: In file included from drivers/net/ethernet/cirrus/cs89x0.c:79:0: drivers/net/ethernet/cirrus/cs89x0.h:324:0: error: "RAM_SIZE" redefined [-Werror] #define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */ ^ In file included from /git/arm-soc/arch/arm/mach-rpc/include/mach/io.h:16:0, from /git/arm-soc/arch/arm/include/asm/io.h:194, from /git/arm-soc/include/linux/scatterlist.h:8, from /git/arm-soc/include/linux/dmaengine.h:24, from /git/arm-soc/include/linux/netdevice.h:38, from /git/arm-soc/drivers/net/ethernet/cirrus/cs89x0.c:54: arch/arm/mach-rpc/include/mach/hardware.h:28:0: note: this is the location of the previous definition #define RAM_SIZE 0x10000000 We don't use RAM_SIZE/RAM_START at all, so we could just remove them, but it might be nice to leave them for documentation purposes, so this renames them to RPC_RAM_SIZE/RPC_RAM_START in order to avoid the build warnings Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
w90x900 still provides its own variant of the clk API rather than using the generic COMMON_CLK API. This generally works, but it causes some link errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent or clk_round_rate functions when a platform lacks those interfaces. This adds empty stub implementations for each of them, and I don't even try to do something useful here but instead just print a WARN() message to make it obvious what is going on if they ever end up being called. The drivers that call these won't be used on these platforms (otherwise we'd get a link error today), so the added code is harmless bloat and will warn about accidental use. A while ago there was a proposal to change w90x900 to use the common-clk implementation, which would be the way it should be handled properly. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Alexander Sverdlin 提交于
It's a combination of the patch from Arnd Bergmann, which added empty stubs for clk_round_rate() and clk_set_parent() and a working trivial implementation of clk_get_parent(). The later is required for ADC driver. Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 27 7月, 2017 10 次提交
-
-
由 Arnd Bergmann 提交于
sa1100 provides its own variant of the clk API rather than using the generic COMMON_CLK API. This generally works, but it causes some link errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent or clk_round_rate functions when a platform lacks those interfaces. This adds trivial stub implementations for each of them, based on the behavior of the COMMON_CLK implementation: - set_rate() and set_parent() report success without doing anything - round_rate() returns the clk rate - get_parent() returns NULL. This adds the minimal bloat and should do the right thing for the simple clock hardware in this SoC. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
davinci still has its own clk implementation, but lacks a clk_get_parent() helper, which can lead to link errors in randconfig builds. This adds the usual implementation. Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
In commit 3169663a "ARM: sa11x0/pxa: convert OS timer registers to IOMEM", the definition of the OSCR macro was changed to be an __iomem pointer, but the same register is also used by the XIP code. This patch does the corresponding change here as well. On PXA, the IRQ register definitions were removed even earlier, in commit 5d284e35 ("ARM: pxa: avoid accessing interrupt registers directly"). This patch unfortunately brings some of that back. An earlier version of my patch moved the code into an external function, which could not work for CONFIG_XIP_KERNEL+CONFIG_MTD_XIP, so this restores something close to the original code. Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-March/241716.htmlAcked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
A change to the platform data definitions caused a warning in the board code: arch/arm/mach-davinci/board-da850-evm.c:1221:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] arch/arm/mach-davinci/board-da850-evm.c:1231:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] This is a bit unfortunate, since we generally like structure definitions to be const, but as this is legacy code, the easiest way out is still to remove the 'const' annotation here. Fixes: 4a5f8ae5 ("[media] davinci: vpif_capture: get subdevs from DT when available") Fixes: 231ce279 ("ARM: davinci: fix const warnings") Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Geert Uytterhoeven 提交于
The ZTE SoC drivers are only useful when building for a ZTE ZX platform. Fixes: 4c2c2e39 ("soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NBaoyou Xie <baoyou.xie@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.infradead.org/linux-mvebu由 Arnd Bergmann 提交于
Pull "mvebu fixes for 4.13 (part 1)" from Gregory CLEMENT: - Fix wrong irq type for gpio expeander on Armada 388 GP - Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform SMP code * tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: Fix irq type for pca955 ARM: mvebu: use __pa_symbol in the mv98dx3236 platform SMP code
-
由 Krzysztof Kozlowski 提交于
Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock controller block. This allows driver to keep EPLL enabled before accessing any MAUDIO registers thus fixing silent hang. This silent hang appeared with commit 6edfa11c ("clk: samsung: Add enable/disable operation for PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated) messages: [ 2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci [ 2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653) Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Second Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman: Correct order of sound clock frequencies for ULCB boards used by r8a7795 and r8a7796 SoCs. These sounds clock frequencies are used as the ADG clock (output clocks for audio module) initial setting and sound codec's initial system clock which needs the maximum clock frequency. Thus, descending order is required. * tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: ulcb: sound clock-frequency needs descending order
-
由 Arnd Bergmann 提交于
Merge tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "Few fixes for omaps for issues found recently" from Tony Lindgren: - Fix disable_irq related shared IRQ warnings for omap3 PRM - Fix omap4 legacy code regression that accidentally removed code that we still need for PRM interrupts - Fix dm8168-evm NAND pins and MMC write protect pin direction - Fix dra71-evm mdio impedance values * tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra71-evm: mdio: Fix impedance values ARM: dts: dm816x: Correct the state of the write protect pin ARM: dts: dm816x: Correct NAND support nodes ARM: OMAP4: Fix legacy code clean-up regression ARM: OMAP2+: Fix omap3 prm shared irq
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Fixes for v4.13" from Simon Horman: Correct order of sound clock frequencies for Salvator boards used by r8a7795 and r8a7796 SoCs. These sounds clock frequencies are used as the ADG clock (output clocks for audio module) initial setting and sound codec's initial system clock which needs the maximum clock frequency. Thus, descending order is required. * tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: renesas: salvator-common: sound clock-frequency needs descending order
-
- 24 7月, 2017 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This adds a perl script to actually parse the MAINTAINERS file, clean up some whitespace in it, warn about errors in it, and then properly sort the end result. My perl-fu is atrocious, so the script has basically been created by randomly putting various characters in a pile, mixing them around, and then looking it the end result does anything interesting when used as a perl script. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Prepping for scripting the MAINTAINERS file cleanup (and possible split) showed a couple of cases where the headers for a couple of entries were bogus. There's a few different kinds of bogosities: - the X-GENE SOC EDAC case was confused and split over two lines - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all different things. - the NOKIA N900 CAMERA SUPPORT" was duplicated all of which were more obvious when you started doing associative arrays in perl to track these things by the header (so that we can alphabetize this thing properly, and so that we might split it up by the data too). Cc: Joe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: "Some fixes and cleanups for running under Xen" * tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't online new memory initially xen/x86: fix cpu hotplug xen/grant-table: log the lack of grants xen/x86: Don't BUG on CPU0 offlining
-
- 23 7月, 2017 6 次提交
-
-
由 Juergen Gross 提交于
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Juergen Gross 提交于
Commit dc6416f1 ("xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()") introduced an error leading to a stack overflow of the idle task when a cpu was brought offline/online many times: by calling cpu_startup_entry() instead of returning at the end of xen_play_dead() do_idle() would be entered again and again. Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing to return from xen_play_dead(). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Wengang Wang 提交于
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a leftover from ancient times when CPU0 hotplug was impossible, it works just fine for HVM. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
-
- 22 7月, 2017 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for reported issues for 4.13-rc2. Also in here is a new driver, the virtualbox DRM driver. It's stand-alone and got acks from the DRM developers to go in through this tree. It's a new thing, but it should be fine for this point in the rc cycle due to it being independent. All of this has been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: add TL-WN722N v2 support staging: speakup: safely register and unregister ldisc staging: speakup: add functions to register and unregister ldisc staging: speakup: safely close tty staging: sm750fb: avoid conflicting vesafb staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code staging: vboxvideo: Add vboxvideo to drivers/staging staging: sm750fb: fixed a assignment typo staging: rtl8188eu: memory leak in rtw_free_cmd_obj() staging: vchiq_arm: fix error codes in probe staging: comedi: ni_mio_common: fix AO timer off-by-one regression
-
由 Randy Dunlap 提交于
Fix major alphabetic errors. No attempt to fix items that all begin with the same word (like ARM, BROADCOM, DRM, EDAC, FREESCALE, INTEL, OMAP, PCI, SAMSUNG, TI, USB, etc.). (diffstat +/- is different by one line because TI KEYSTONE MULTICORE had 2 blank lines after it.) Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Anna Schumaker: "Stable bugfix: - Fix error reporting regression Bugfixes: - Fix setting filelayout ds address race - Fix subtle access bug when using ACLs - Fix setting mnt3_counts array size - Fix a couple of pNFS commit races" * tag 'nfs-for-4.13-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS/filelayout: Fix racy setting of fl->dsaddr in filelayout_check_deviceid() NFS: Be more careful about mapping file permissions NFS: Store the raw NFS access mask in the inode's access cache NFSv3: Convert nfs3_proc_access() to use nfs_access_set_mask() NFS: Refactor NFS access to kernel access mask calculation net/sunrpc/xprt_sock: fix regression in connection error reporting. nfs: count correct array for mnt3_counts array size Revert commit 722f0b89 ("pNFS: Don't send COMMITs to the DSes if...") pNFS/flexfiles: Handle expired layout segments in ff_layout_initiate_commit() NFS: Fix another COMMIT race in pNFS NFS: Fix a COMMIT race in pNFS mount: copy the port field into the cloned nfs_server structure. NFS: Don't run wake_up_bit() when nobody is waiting... nfs: add export operations
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs fixes from Miklos Szeredi: "This fixes a crash with SELinux and several other old and new bugs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: check for bad and whiteout index on lookup ovl: do not cleanup directory and whiteout index entries ovl: fix xattr get and set with selinux ovl: remove unneeded check for IS_ERR() ovl: fix origin verification of index dir ovl: mark parent impure on ovl_link() ovl: fix random return value on mount
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A small set of fixes for -rc2 - two fixes for BFQ, documentation and code, and a removal of an unused variable in nbd. Outside of that, a small collection of fixes from the usual crew on the nvme side" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: don't report 0-bytes in serial number nvmet: preserve controller serial number between reboots nvmet: Move serial number from controller to subsystem nvmet: prefix version configfs file with attr nvme-pci: Fix an error handling path in 'nvme_probe()' nvme-pci: Remove nvme_setup_prps BUG_ON nvme-pci: add another device ID with stripe quirk nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association nvme: fix byte swapping in the streams code nbd: kill unused ret in recv_work bfq: dispatch request to prevent queue stalling after the request completion bfq: fix typos in comments about B-WF2Q+ algorithm
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull more rdma fixes from Doug Ledford: "As per my previous pull request, there were two drivers that each had a rather large number of legitimate fixes still to be sent. As it turned out, I also missed a reasonably large set of fixes from one person across the stack that are all important fixes. All in all, the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull request. There were some other random fixes that I didn't send in the last pull request that I added to this one. This catches the rdma stack up to the fixes from up to about the beginning of this week. Any more fixes I'll wait and batch up later in the -rc cycle. This will give us a good base to start with for basing a for-next branch on -rc2. Summary: - i40iw fixes - bnxt_re fixes - Dan Carpenter bugfixes across stack - ten more random fixes, no more than two from any one person" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) RDMA/core: Initialize port_num in qp_attr RDMA/uverbs: Fix the check for port number IB/cma: Fix reference count leak when no ipv4 addresses are set RDMA/iser: don't send an rkey if all data is written as immadiate-data rxe: fix broken receive queue draining RDMA/qedr: Prevent memory overrun in verbs' user responses iw_cxgb4: don't use WR keys/addrs for 0 byte reads IB/mlx4: Fix CM REQ retries in paravirt mode IB/rdmavt: Setting of QP timeout can overflow jiffies computation IB/core: Fix sparse warnings RDMA/bnxt_re: Fix the value reported for local ack delay RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq RDMA/bnxt_re: Fix return value of poll routine RDMA/bnxt_re: Enable atomics only if host bios supports RDMA/bnxt_re: Specify RDMA component when allocating stats context RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP RDMA/bnxt_re: Report supported value to IB stack in query_device RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext ...
-