- 19 10月, 2011 1 次提交
-
-
由 stephen hemminger 提交于
Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2011 5 次提交
-
-
-
由 Matthew Daley 提交于
x25_find_listener does not check that the amount of call user data given in the skb is big enough in per-socket comparisons, hence buffer overreads may occur. Fix this by adding a check. Signed-off-by: NMatthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Daley 提交于
There are multiple locations in the X.25 packet layer where a skb is assumed to be of at least a certain size and that all its data is currently available at skb->data. These assumptions are not checked, hence buffer overreads may occur. Use pskb_may_pull to check these minimal size assumptions and ensure that data is available at skb->data when necessary, as well as use skb_copy_bits where needed. Signed-off-by: NMatthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Daley 提交于
X.25 call user data is being copied in its entirety from incoming messages without consideration to the size of the destination buffers, leading to possible buffer overflows. Validate incoming call user data lengths before these copies are performed. It appears this issue was noticed some time ago, however nothing seemed to come of it: see http://www.spinics.net/lists/linux-x25/msg00043.html and commit 8db09f26. Signed-off-by: NMatthew Daley <mattjd@gmail.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NAndrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
Commit 903ab86d of 1 March this year ("udp: Add lockless transmit path") introduced a new fast TX path that broke the checksum coverage computation of UDP-lite, which so far depended on up->len (only set if the socket is locked and 0 in the fast path). Fixed by providing both fast- and slow-path computation of checksum coverage. The latter can be removed when UDP(-lite)v6 also uses a lockless transmit path. Reported-by: NThomas Volkert <thomas@homer-conferencing.com> Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2011 1 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Properly report thermal diode sensors
-
- 14 10月, 2011 8 次提交
-
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio-pca953x: fix gpio_base gpio/omap: fix build error with certain OMAP1 configs
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: revert to using a kthread for AIL pushing xfs: force the log if we encounter pinned buffers in .iop_pushbuf xfs: do not update xa_last_pushed_lsn for locked items
-
git://github.com/cmetcalf-tilera/linux-tile由 Linus Torvalds 提交于
* 'stable' of git://github.com/cmetcalf-tilera/linux-tile: tile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files
-
git://tesla.tglx.de/git/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86: Default to vsyscall=native for now
-
由 Mika Westerberg 提交于
SFI tables reside in RAM and should not be modified once they are written. Current code went to set pentry->irq to zero which causes subsequent reads to fail with invalid SFI table checksum. This will break kexec as the second kernel fails to validate SFI tables. To fix this we use temporary variable for irq number. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
The w83627ehf driver is improperly reporting thermal diode sensors as type 2, instead of 3. This caused "sensors" and possibly other monitoring tools to report these sensors as "transistor" instead of "thermal diode". Furthermore, diode subtype selection (CPU vs. external) is only supported by the original W83627EHF/EHG. All later models only support CPU diode type, and some (NCT6776F) don't even have the register in question so we should avoid reading from it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Hartmut Knaack 提交于
gpio_base was set to 0 if no system platform data or open firmware platform data was provided. This led to conflicts, if any other gpiochip with a gpiobase of 0 was instantiated already. Setting it to -1 will automatically use the first one available. Signed-off-by: NHartmut Knaack <knaack.h@gmx.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Janusz Krzysztofik 提交于
With commit f64ad1a0, "gpio/omap: cleanup _set_gpio_wakeup(), remove ifdefs", access to build time conditionally omitted 'suspend_wakeup' member of the 'gpio_bank' structure has been placed unconditionally in function _set_gpio_wakeup(), which is always built. This resulted in the driver compilation broken for certain OMAP1, i.e., non-OMAP16xx, configurations. Really required or not in previously excluded cases, define this structure member unconditionally as a fix. Tested with a custom OMAP1510 only configuration. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NKevin Hilman <khilman@ti.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 13 10月, 2011 5 次提交
-
-
由 Chris Metcalf 提交于
The 32-bit TILEPro support uses some #defines in <asm/atomic_32.h> for atomic support routines in assembly. To make this more explicit, I've turned those includes into includes of <asm/atomic_32.h>, which should hopefully make it clear that they shouldn't be bombed into <linux/atomic.h> in any cleanups. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: mscan: too much data copied to CAN frame due to 16 bit accesses gro: refetch inet6_protos[] after pulling ext headers bnx2x: fix cl_id allocation for non-eth clients for NPAR mode mlx4_en: fix endianness with blue frame support
-
由 Johann Felix Soden 提交于
Fix file references in drivers/ide/ There are a lot of file references to now moved or deleted files in the whole tree, especially in documentation and Kconfig files. This patch fixes the references in drivers/ide/. Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/chrismason/linux由 Linus Torvalds 提交于
* 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: make sure not to defrag extents past i_size Btrfs: fix recursive auto-defrag
-
由 Hans Schillstrom 提交于
ip_vs_mutext is used by both netns shutdown code and startup and both implicit uses sk_lock-AF_INET mutex. cleanup CPU-1 startup CPU-2 ip_vs_dst_event() ip_vs_genl_set_cmd() sk_lock-AF_INET __ip_vs_mutex sk_lock-AF_INET __ip_vs_mutex * DEAD LOCK * A new mutex placed in ip_vs netns struct called sync_mutex is added. Comments from Julian and Simon added. This patch has been running for more than 3 month now and it seems to work. Ver. 3 IP_VS_SO_GET_DAEMON in do_ip_vs_get_ctl protected by sync_mutex instead of __ip_vs_mutex as sugested by Julian. Signed-off-by: NHans Schillstrom <hans@schillstrom.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 12 10月, 2011 3 次提交
-
-
由 Christoph Hellwig 提交于
Currently we have a few issues with the way the workqueue code is used to implement AIL pushing: - it accidentally uses the same workqueue as the syncer action, and thus can be prevented from running if there are enough sync actions active in the system. - it doesn't use the HIGHPRI flag to queue at the head of the queue of work items At this point I'm not confident enough in getting all the workqueue flags and tweaks right to provide a perfectly reliable execution context for AIL pushing, which is the most important piece in XFS to make forward progress when the log fills. Revert back to use a kthread per filesystem which fixes all the above issues at the cost of having a task struct and stack around for each mounted filesystem. In addition this also gives us much better ways to diagnose any issues involving hung AIL pushing and removes a small amount of code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NStefan Priebe <s.priebe@profihost.ag> Tested-by: NStefan Priebe <s.priebe@profihost.ag> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
We need to check for pinned buffers even in .iop_pushbuf given that inode items flush into the same buffers that may be pinned directly due operations on the unlinked inode list operating directly on buffers. To do this add a return value to .iop_pushbuf that tells the AIL push about this and use the existing log force mechanisms to unpin it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NStefan Priebe <s.priebe@profihost.ag> Tested-by: NStefan Priebe <s.priebe@profihost.ag> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
If an item was locked we should not update xa_last_pushed_lsn and thus skip it when restarting the AIL scan as we need to be able to lock and write it out as soon as possible. Otherwise heavy lock contention might starve AIL pushing too easily, especially given the larger backoff once we moved xa_last_pushed_lsn all the way to the target lsn. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NStefan Priebe <s.priebe@profihost.ag> Tested-by: NStefan Priebe <s.priebe@profihost.ag> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 11 10月, 2011 7 次提交
-
-
由 Chris Mason 提交于
The btrfs file defrag code will loop through the extents and force COW on them. But there is a concurrent truncate in the middle of the defrag, it might end up defragging the same range over and over again. The problem is that writepage won't go through and do anything on pages past i_size, so the cow won't happen, so the file will appear to still be fragmented. defrag will end up hitting the same extents again and again. In the worst case, the truncate can actually live lock with the defrag because the defrag keeps creating new ordered extents which the truncate code keeps waiting on. The fix here is to make defrag check for i_size inside the main loop, instead of just once before the looping starts. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Adrian Bunk 提交于
This UML breakage: linux-2.6.30.1[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790 linux-2.6.30.1[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790 Is caused by commit 3ae36655 ("x86-64: Rework vsyscall emulation and add vsyscall= parameter") - the vsyscall emulation code is not fully cooked yet as UML relies on some rather fragile SIGSEGV semantics. Linus suggested in https://lkml.org/lkml/2011/8/9/376 to default to vsyscall=native for now, this patch implements that. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NAndrew Lutomirski <luto@mit.edu> Cc: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/20111005214047.GE14406@localhost.pp.htv.fiSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Follow those steps: # mount -o autodefrag /dev/sda7 /mnt # dd if=/dev/urandom of=/mnt/tmp bs=200K count=1 # sync # dd if=/dev/urandom of=/mnt/tmp bs=8K count=1 conv=notrunc and then it'll go into a loop: writeback -> defrag -> writeback ... It's because writeback writes [8K, 200K] and then writes [0, 8K]. I tried to make writeback know if the pages are dirtied by defrag, but the patch was a bit intrusive. Here I simply set writeback_index when we defrag a file. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Wolfgang Grandegger 提交于
Due to the 16 bit access to mscan registers there's too much data copied to the zero initialized CAN frame when having an odd number of bytes to copy. This patch ensures that only the requested bytes are copied by using an 8 bit access for the remaining byte. Reported-by: NAndre Naujoks <nautsch@gmail.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan, Zheng 提交于
ipv6_gro_receive() doesn't update the protocol ops after pulling the ext headers. It looks like a typo. Signed-off-by: NZheng Yan <zheng.z.yan@intel.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
There are some consolidations of NPAR configuration when FCoE and iSCSI L2 clients will get the same id, in this case FCoE ring will be non-functional. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
The doorbell register was being unconditionally swapped. In x86, that meant it was being swapped to BE and written to the descriptor and to memory, depending on the case of blue frame support or writing to doorbell register. On PPC, this meant it was being swapped to LE and then swapped back to BE while writing to the register. But in the blue frame case, it was being written as LE to the descriptor. The fix is not to swap doorbell unconditionally, write it to the register as BE and convert it to BE when writing it to the descriptor. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Reported-by: NRichard Hendrickson <richhend@us.ibm.com> Cc: Eli Cohen <eli@dev.mellanox.co.il> Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2011 6 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.samba.org/sfrench/cifs-2.6: [CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2
-
git://git.linaro.org/people/arnd/arm-soc由 Linus Torvalds 提交于
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: mach-ux500: enable fix for ARM errata 754322 ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init ARM: OMAP: Fix i2c init for twl4030 ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
-
由 Marc Dietrich 提交于
This fixes a compilation error in cpu-tegra.c which was introduced in dc8d966b ("ARM: convert PCI defines to variables") which removed the now obsolete mach/hardware.h from the mach-tegra subtree. Signed-off-by: NMarc Dietrich <marvin24@gmx.de> Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1 drm/radeon/kms: fix dp_detect handling for DP bridge chips drm/radeon/kms: retry aux transactions if there are status flags
-
由 Olof Johansson 提交于
A couple of changes to the Tegra maintainership setup: I'm very glad to bring on Stephen Warren on board as a maintainer. The work he has done so far is excellent, and the fact that he works for Nvidia means he has long-term interest in the platform. Erik Gilling did an astounding amount of work on getting things up and running but has been a silent partner on the maintainership side for a while, and is stepping down. Thanks for your contributions so far, Erik. Finally, update the git URL since I'll take over running the main repo for a while. Overall maintainership model isn't changing much at this time: We'll all three review patches as appropriate, and one of us will collect the main repo (me at this time). Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Erik Gilling <konkers@android.com> Acked-by: NColin Cross <ccross@android.com> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits) MIPS: Call oops_enter, oops_exit in die staging/octeon: Software should check the checksum of no tcp/udp packets MIPS: Octeon: Enable C0_UserLocal probing. MIPS: No branches in delay slots for huge pages in handle_tlbl MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) MIPS: Compat: Use 32-bit wrapper for compat_sys_futex. MIPS: Do not use EXTRA_CFLAGS MIPS: Alchemy: DB1200: Disable cascade IRQ in handler SERIAL: Lantiq: Set timeout in uart_port MIPS: Lantiq: Fix setting the PCI bus speed on AR9 MIPS: Lantiq: Fix external interrupt sources MIPS: tlbex: Fix build error in R3000 code. MIPS: Alchemy: Include Au1100 in PM code. MIPS: Alchemy: Fix typo in MAC0 registration MIPS: MSP71xx: Fix build error. MIPS: Handle __put_user() sleeping. MIPS: Allow forced irq threading MIPS: i8259: Mark cascade interrupt non-threaded ...
-
- 09 10月, 2011 1 次提交
-
-
由 Arnd Bergmann 提交于
-
- 08 10月, 2011 1 次提交
-
-
由 Steve French 提交于
Microsoft has a bug with ntlmv2 that requires use of ntlmssp, but we didn't get the required information on when/how to use ntlmssp to old (but once very popular) legacy servers (various NT4 fixpacks for example) until too late to merge for 3.1. Will upgrade to NTLMv2 in NTLMSSP in 3.2 Signed-off-by: NSteve French <smfrench@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com>
-
- 07 10月, 2011 2 次提交
-
-
由 srinidhi kasagar 提交于
This applies ARM errata fix 754322 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
git://github.com/davem330/net由 Linus Torvalds 提交于
* git://github.com/davem330/net: net: fix typos in Documentation/networking/scaling.txt bridge: leave carrier on for empty bridge netfilter: Use proper rwlock init function tcp: properly update lost_cnt_hint during shifting tcp: properly handle md5sig_pool references macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
-