- 20 4月, 2015 13 次提交
-
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
remove_session_caps_cb() does not truncate dirty data in page cache, but zeros i_wrbuffer_ref/i_wrbuffer_ref_head. This will result negtive i_wrbuffer_ref/i_wrbuffer_ref_head Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
No i_auth_cap means reconnecting to MDS was denied. So don't add new dirty caps. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
when reconnecting to MDS is denied, we remove session caps forcibly. But it's possible there are ongoing write, the write code needs to reference i_snap_realm. So if there are ongoing write, we keep i_snap_realm. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Joe Perches 提交于
To avoid possible interleaving, add missing '\n' to formats. Convert pr_warning to pr_warn while there. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Sanidhya Kashyap 提交于
Currently, there is no check for the kstrdup() for r_path2, r_path1 and snapdir_name as various locations as there is a possibility of failure during memory pressure. Therefore, returning ENOMEM where the checks have been missed. Signed-off-by: NSanidhya Kashyap <sanidhya.gatech@gmail.com> Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Taesoo Kim 提交于
When ceph_update_writeable_page fails (including -EAGAIN), it unlocks (w/ unlock_page) the page but does not 'release' (w/ page_cache_release) properly. Upon error, properly set *pagep to NULL, indicating an error. Signed-off-by: NTaesoo Kim <tsgatesv@gmail.com> Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Ilya Dryomov 提交于
pr_info what exactly was the culprit: missing pool, image or snap. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Nicholas Mc Guire 提交于
return type of wait_for_completion_timeout is unsigned long not int. An appropriately named unsigned long is added and the assignment fixed up. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Fabian Frederick 提交于
ceph_aops was already defined extern in addr.c section Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
- 13 4月, 2015 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs and fs fixes from Al Viro: "Several AIO and OCFS2 fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ocfs2: _really_ sync the right range ocfs2_file_write_iter: keep return value and current position update in sync [regression] ocfs2: do *not* increment ->ki_pos twice ioctx_alloc(): fix vma (and file) leak on failure fix mremap() vs. ioctx_kill() race
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal由 Linus Torvalds 提交于
Pull last minute thermal-SoC management fixes from Eduardo Valentin: "Specifics: - Minor fixes on ST and RCAR thermal drivers. - Avoid flooding kernel log when driver returns -EAGAIN. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: drivers: thermal: st: remove several sparse warnings thermal: constify of_device_id array thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN thermal: rcar: Fix typo in r8a73a4 SoC name
-
- 12 4月, 2015 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Linus Torvalds 提交于
Pull last-minute ASoC fix from Mark Brown: "This patch backs out a change that came in during the merge window which selects a configuration for GPIO4 on pcm512x CODECs that may not be suitable for all systems using the device. Changes for v4.1 will make this properly configurable but for now it's safest to revert to the v3.19 behaviour and leave the pin configuration alone. Sorry for sending this direct at the last minute but due to the GPIO misuse it'd be really good to get it in the release and I'd not realised it hadn't been sent yet - between some travel, a job change and other non-urgent fixes coming in I'd lost track of the urgency. It's been in -next for several weeks now, is isolated to the driver and fairly clear to inspection" * tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
-
由 Howard Mitchell 提交于
Currently GPIO4 is hardcoded to output the pll-lock signal. Unfortunately this is after the pll-out GPIO is configured which is selectable in the device tree. Therefore it is not possible to use GPIO4 for pll-out. Therefore this patch removes the configuration of GPIO4. Signed-off-by: NHoward Mitchell <hm@hmbedded.co.uk> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Linus Torvalds 提交于
This reverts commit ecc19d17. It added a new warning to try to encourage driver writers to set the device capabities properly, but drivers haven't been updated and in the meantime it just generaters a scary message that users cannot actually do anything about. Warnings like these are appropriate if you actually expect to fix the code that causes them. They are not appropriate for releases. Requested-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Jan Engelhardt reports a strange oops with an invalid ->sense_buffer pointer in scsi_init_cmd_errh() with the blk-mq code. The sense_buffer pointer should have been initialized by the call to scsi_init_request() from blk_mq_init_rq_map(), but there seems to be some non-repeatable memory corruptor. This patch makes sure we initialize the whole struct request allocation (and the associated 'struct scsi_cmnd' for the SCSI case) to zero, by using __GFP_ZERO in the allocation. The old code initialized a couple of individual fields, leaving the rest undefined (although many of them are then initialized in later phases, like blk_mq_rq_ctx_init() etc. It's not entirely clear why this matters, but it's the rigth thing to do regardless, and with 4.0 imminent this is the defensive "let's just make sure everything is initialized properly" patch. Tested-by: NJan Engelhardt <jengelh@inai.de> Acked-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fix from Vinod Koul: "I have one more fix to fix the boot warning on cppi driver due to missing capabilities" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: cppi41: add missing bitfields
-
git://git.code.sf.net/p/openipmi/linux-ipmi由 Linus Torvalds 提交于
Pull late ipmi fixes from Corey Minyard: "Some annoying issues in the IPMI driver that would be good to have fixed before 4.0 is released. These got reported or discovered late, but they will avoid some situations that would cause lots of log spam and in one case a deadlock" * tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi_ssif: Use interruptible completion for waiting in the thread ipmi/powernv: Fix minor locking bug ipmi: Handle BMCs that don't allow clearing the rcv irq bit
-
- 11 4月, 2015 9 次提交
-
-
由 Felipe Balbi 提交于
Add missing directions, residue_granularity, srd_addr_widths and dst_addr_widths bitfields. Without those we will see a kernel WARN() when loading musb on am335x devices. Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Corey Minyard 提交于
The code was using an normal completion, but that caused stuck task errors after a while. Use an interruptible one to avoid that. Signed-off-by: NCorey Minyard <cminyard@mvista.com>
-
由 Alistair Popple 提交于
If ipmi_powernv_recv(...) is called without a current message it prints a warning and returns. However it fails to release the message lock causing the system to dead lock during any subsequent IPMI operations. This error path should never normally be taken unless there are bugs elsewhere in the system. Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NCorey Minyard <cminyard@mvista.com>
-
由 Corey Minyard 提交于
Some BMCs don't let you clear the receive irq bit in the global enables. This is kind of silly, but they give an error if you try to clear it. Compensate for this by detecting the situation and working around it. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Tested-by: NThomas D <whissi@whissi.de> Reviewed-by: NThomas D <whissi@whissi.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is our remaining set of three fixes for 4.0: two oops fixes(one for cable pulls triggering oopses and the other be2iscsi specific) and one warn on in sysfs on multipath devices using enclosures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Defer processing of REQ_PREEMPT requests for blocked devices be2iscsi: Fix kernel panic when device initialization fails enclosure: fix WARN_ON removing an adapter in multi-path devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Just a few small fixes: Two from Andy, the first addresses a v4.0 target specific regression to a user visible configfs attribute, and the second adds a set of missing brackets around IPv6 discovery portal information within iscsi-target. And one from Mike that fixes an OOPs regression in traditional iscsi-target when an iovec allocation fails, that has been present since v3.10.y code. (CC'd to stable)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi target: fix oops when adding reject pdu iscsi-target: TargetAddress in SendTargets should bracket ipv6 addresses target: Allow userspace to write 1 to attrib/emulate_fua_write
-
由 Mike Christie 提交于
This fixes a oops due to a double list add when adding a reject PDU for iscsit_allocate_iovecs allocation failures. The cmd has already been added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call iscsit_reject_cmd. Note that for ERL0 the reject PDU is not actually sent, so this patch is not completely tested. Just verified we do not oops. The problem is the add reject functions return -1 which is returned all the way up to iscsi_target_rx_thread which for ERL0 will drop the connection. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here are fixes gathered for 4.0-final; one FireFire endian fix, two USB-audio quirks, and three HD-audio quirks. All relatively small and device-specific fixes, should be pretty safe to apply" * tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support ALSA: hda - Fix headphone pin config for Lifebook T731 ALSA: bebob: fix to processing in big-endian machine for sending cue ALSA: hda/realtek - Make more stable to get pin sense for ALC283 ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate ALSA: hda/realtek - Support Dell headset mode for ALC256
-
git://git.rocketboards.org/linux-socfpga-next由 Linus Torvalds 提交于
Pull arch/nios2 fixes from Ley Foon Tan: "There are 3 arch/nios2 fixes for 4.0 final: - fix cache coherency issue when debugging with gdb - move restart_block to struct task_struct (aligned with other architectures) - fix for missing registers defines for ptrace" * tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix cache coherency issue when debug with gdb nios2: add missing ptrace registers defines nios2: signal: Move restart_block to struct task_struct
-
- 10 4月, 2015 4 次提交
-
-
由 Ley Foon Tan 提交于
Remove the end address checking for flushda function. We need to flush each address line for flushda instruction, from start to end address. This is because flushda instruction only flush the cache if tag and line fields are matched. Change to use ldwio instruction (bypass cache) to load the instruction that causing trap. Our interest is the actual instruction that executed by the processor, this should be uncached. Note, EA address might be an userspace cached address. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "These are stable-candidate fixes of some recently reported issues in the cpufreq core, cpuidle core, the ACPI cpuidle driver and the hibernate core. Specifics: - Revert a 3.17 hibernate commit that was supposed to fix an issue related to e820 reserved regions, but broke resume from hibernation on Lenovo x230 (Rafael J Wysocki). - Prevent the ACPI cpuidle driver from overwriting the name and description of the C0 state set by the core when the list of C-states changes (Thomas Schlichter). - Remove the no longer needed state_count field from struct cpuidle_device which prevents the list of C-states shown by the sysfs interface from becoming incorrect when the current number of them is different from the number of C-states on boot (Bartlomiej Zolnierkiewicz). - The cpufreq core updates the policy object of the only online CPU during system resume to make it reflect the current hardware state, but it always assumes that CPU to be CPU0 which need not be the case, so fix the code to avoid that assumption (Viresh Kumar)" * tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device cpufreq: Schedule work for the first-online CPU on resume
-
由 Rafael J. Wysocki 提交于
* pm-sleep: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" * pm-cpufreq: cpufreq: Schedule work for the first-online CPU on resume * pm-cpuidle: cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver
-
- 09 4月, 2015 5 次提交
-
-
由 Dmitry M. Fedin 提交于
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: NDmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Al Viro 提交于
"ocfs2 syncs the wrong range" had been broken; prior to it the code was doing the wrong thing in case of O_APPEND, all right, but _after_ it we were syncing the wrong range in 100% cases. *ppos, aka iocb->ki_pos is incremented prior to that point, so we are always doing sync on the area _after_ the one we'd written to. Spotted by Joseph Qi <joseph.qi@huawei.com> back in January; unfortunately, I'd missed his mail back then ;-/ Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Ley Foon Tan 提交于
These are all register available in nios2. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Final drm fixes: one core locking imbalance regression, and a bunch of i915 baytrail s/r fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fix drm_mode_getconnector() locking imbalance regression drm/i915/vlv: remove wait for previous GFX clk disable request drm/i915/chv: Remove Wait for a previous gfx force-off drm/i915/vlv: save/restore the power context base reg
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull ceph revert from Sage Weil: "This corrects a recent misadventure with __GFP_MEMALLOC and PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better off relying on dirty page throttling" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: Revert "libceph: use memalloc flags for net IO"
-