Commit d8630bb9 ('Serialize session deletion by using work_lock')
tries to fixup a deadlock when deleting sessions, but fails to take into
account the locking rules. This patch resolves the situation by
introducing a separate lock for processing the GNLIST response, and
ensures that sess_lock is released before calling
qlt_schedule_sess_delete().

Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: Quinn Tran <quinn.tran@cavium.com>
Fixes: d8630bb9 ("scsi: qla2xxx: Serialize session deletion by using work_lock")
Signed-off-by: NHannes Reinecke <hare@suse.com>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes NULL pointer crash due to active timer running for abort
IOCB.

From crash dump analysis it was discoverd that get_next_timer_interrupt()
encountered a corrupted entry on the timer list.

 #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8
    [exception RIP: get_next_timer_interrupt+440]
    RIP: ffffffff90ea3088  RSP: ffff95e1f6f0fdf0  RFLAGS: 00010013
    RAX: ffff95e1f6451028  RBX: 000218e2389e5f40  RCX: 00000001232ad600
    RDX: 0000000000000001  RSI: ffff95e1f6f0fdf0  RDI: 0000000001232ad6
    RBP: ffff95e1f6f0fe40   R8: ffff95e1f6451188   R9: 0000000000000001
    R10: 0000000000000016  R11: 0000000000000016  R12: 00000001232ad5f6
    R13: ffff95e1f6450000  R14: ffff95e1f6f0fdf8  R15: ffff95e1f6f0fe10
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

Looking at the assembly of get_next_timer_interrupt(), address came
from %r8 (ffff95e1f6451188) which is pointing to list_head with single
entry at ffff95e5ff621178.

 0xffffffff90ea307a <get_next_timer_interrupt+426>:      mov    (%r8),%rdx
 0xffffffff90ea307d <get_next_timer_interrupt+429>:      cmp    %r8,%rdx
 0xffffffff90ea3080 <get_next_timer_interrupt+432>:      je     0xffffffff90ea30a7 <get_next_timer_interrupt+471>
 0xffffffff90ea3082 <get_next_timer_interrupt+434>:      nopw   0x0(%rax,%rax,1)
 0xffffffff90ea3088 <get_next_timer_interrupt+440>:      testb  $0x1,0x18(%rdx)

 crash> rd ffff95e1f6451188 10
 ffff95e1f6451188:  ffff95e5ff621178 ffff95e5ff621178   x.b.....x.b.....
 ffff95e1f6451198:  ffff95e1f6451198 ffff95e1f6451198   ..E.......E.....
 ffff95e1f64511a8:  ffff95e1f64511a8 ffff95e1f64511a8   ..E.......E.....
 ffff95e1f64511b8:  ffff95e77cf509a0 ffff95e77cf509a0   ...|.......|....
 ffff95e1f64511c8:  ffff95e1f64511c8 ffff95e1f64511c8   ..E.......E.....

 crash> rd ffff95e5ff621178 10
 ffff95e5ff621178:  0000000000000001 ffff95e15936aa00   ..........6Y....
 ffff95e5ff621188:  0000000000000000 00000000ffffffff   ................
 ffff95e5ff621198:  00000000000000a0 0000000000000010   ................
 ffff95e5ff6211a8:  ffff95e5ff621198 000000000000000c   ..b.............
 ffff95e5ff6211b8:  00000f5800000000 ffff95e751f8d720   ....X... ..Q....

 ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080.

 CACHE            NAME                 OBJSIZE  ALLOCATED     TOTAL  SLABS  SSIZE
 ffff95dc7fd74d00 mnt_cache                384      19785     24948    594    16k
   SLAB              MEMORY            NODE  TOTAL  ALLOCATED  FREE
   ffffdc5dabfd8800  ffff95e5ff620000     1     42         29    13
   FREE / [ALLOCATED]
    ffff95e5ff621080  (cpu 6 cache)

Examining the contents of that memory reveals a pointer to a constant string
in the driver, "abort\0", which is set by qla24xx_async_abort_cmd().

 crash> rd ffffffffc059277c 20
 ffffffffc059277c:  6e490074726f6261 0074707572726574   abort.Interrupt.
 ffffffffc059278c:  00676e696c6c6f50 6920726576697244   Polling.Driver i
 ffffffffc059279c:  646f6d207325206e 6974736554000a65   n %s mode..Testi
 ffffffffc05927ac:  636976656420676e 786c252074612065   ng device at %lx
 ffffffffc05927bc:  6b63656843000a2e 646f727020676e69   ...Checking prod
 ffffffffc05927cc:  6f20444920746375 0a2e706968632066   uct ID of chip..
 ffffffffc05927dc:  5120646e756f4600 204130303232414c   .Found QLA2200A
 ffffffffc05927ec:  43000a2e70696843 20676e696b636568   Chip...Checking
 ffffffffc05927fc:  65786f626c69616d 6c636e69000a2e73   mailboxes...incl
 ffffffffc059280c:  756e696c2f656475 616d2d616d642f78   ude/linux/dma-ma

 crash> struct -ox srb_iocb
 struct srb_iocb {
           union {
               struct {...} logio;
               struct {...} els_logo;
               struct {...} tmf;
               struct {...} fxiocb;
               struct {...} abt;
               struct ct_arg ctarg;
               struct {...} mbx;
               struct {...} nack;
    [0x0 ] } u;
    [0xb8] struct timer_list timer;
    [0x108] void (*timeout)(void *);
 }
 SIZE: 0x110

 crash> ! bc
 ibase=16
 obase=10
 B8+40
 F8

The object is a srb_t, and at offset 0xf8 within that structure
(i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list.

Cc: <stable@vger.kernel.org> #4.4+
Fixes: 4440e46d ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.")
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch is based on Max's original patch.

When the qla2xxx firmware is unavailable, eventually
qla2x00_sp_timeout() is reached, which calls the timeout function and
frees the srb_t instance.

The timeout function always resolves to qla2x00_async_iocb_timeout(),
which invokes another callback function called "done".  All of these
qla2x00_*_sp_done() callbacks also free the srb_t instance; after
returning to qla2x00_sp_timeout(), it is freed again.

The fix is to remove the "sp->free(sp)" call from qla2x00_sp_timeout()
and add it to those code paths in qla2x00_async_iocb_timeout() which
do not already free the object.

This is how it looks like with KASAN:

BUG: KASAN: use-after-free in qla2x00_sp_timeout+0x228/0x250
Read of size 8 at addr ffff88278147a590 by task swapper/2/0

Allocated by task 1502:
save_stack+0x33/0xa0
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc+0xb8/0x1c0
mempool_alloc+0xd6/0x260
qla24xx_async_gnl+0x3c5/0x1100

Freed by task 0:
save_stack+0x33/0xa0
kasan_slab_free+0x72/0xc0
kmem_cache_free+0x75/0x200
qla24xx_async_gnl_sp_done+0x556/0x9e0
qla2x00_async_iocb_timeout+0x1c7/0x420
qla2x00_sp_timeout+0x16d/0x250
call_timer_fn+0x36/0x200

The buggy address belongs to the object at ffff88278147a440
which belongs to the cache qla2xxx_srbs of size 344
The buggy address is located 336 bytes inside of
344-byte region [ffff88278147a440, ffff88278147a598)
Reported-by: NMax Kellermann <mk@cm4all.com>
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Cc: Max Kellermann <mk@cm4all.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

[mkp: sparse warning]
Signed-off-by: NDarren Trapp <darren.trapp@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes following smatch warning:

drivers/scsi/qla2xxx/qla_init.c:1054 __qla24xx_handle_gpdb_event() warn: inconsistent indenting
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes following Smatch warning:

drivers/scsi/qla2xxx/qla_init.c:130 qla2x00_async_iocb_timeout() error: we previously assumed 'fcport' could be null (see line 107)

Fixes: 5c25d451 ("scsi: qla2xxx: Fix NULL pointer access for fcport structure")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

for session deletion, replace sess_lock with work_lock.
Under certain case sess_lock is not feasiable to acquire.
The lock is needed temporarily to make sure a single
call to schedule of the work element.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Immeadiate flag is not used for scheduling session deletion.
Remove it to simplfy session deletion code path.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds check for pending work event before queueing
relogin work to prevent redundant work to be active at the
same time.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add check to allow single discovery command per session to be sent
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Delay loop id allocation to login time
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When any kind of reset is issued, current code was setting
state of LOGIN pending too early. This resulted into driver
not retrying relogin until pervious reloin completes.
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

add ability to use gpnft/gnnft to handle RSCN.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes issue with extraction of ADISC error codes
for decoding the error returned
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

retry gpnft/gnnft if error is encountered.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Relogin stop moving forward due to improper check of scan_state flag.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Host lookup via btree is currently protected by the hardware_lock.
Add hardware_lock when modifying btree to store host pointer.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

- add "async" gpn_ft, gnn_ft, gfpn_id, gnn_id switch commands.
- For 8G and newer adapters, use async commands when it comes to
fabric scan to reduce bottle neck.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When connection type is N_Port to N_Port (point-to-point), there
is a possibilty where initiator will not send PLOGI request and
will directly send PRLI. In N2N connection the port has higher
port name sends the PLOGI but not allow to send PRLI if is a
target mode. Only initiator is allowed to send PRLI.

Current driver code deletes old session when it receives PLOGI
request. If we will not receive PLOGI request then we will not
delete old session and create new session. Add check for N2N
with PRLI receive only and trigger cleanup. For this case, the
cleanup requires individual cmd abort instead of using implicit
logout as a broad stroke flush.
Signed-off-by: NKrishna Kant <krishna.kant@purestorage.com>
Signed-off-by: NAlexei Potashnik <alexei@purestorage.com>
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For Dual Mode, Initiator side of the driver finish login,
target side receive PRLI, but driver terminates PRLI.
This patch allows target side to go ahead and accept PRLI.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The logo ELS command allocates dma coherent memory for the
data payload and serialize the completions. When this command
times out, the timeout routine completes the thread waiting
for completion which in turn cleanup resources allocated for
this ELS command processing. Don't call generic sp->free
routine when this ELS command times out to avoid to double
freeing of the same resources.
Signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add ability to send Implicit PRLO to flush IOs
from FW back to driver.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add option to tell FW to reserve 1/2 of emergency exchanges for ELS.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

DPC thread can stall during switch scan due to slow switch response.
This will stall other work element that needs attention. Moving work
element processing and relogin logic out of DPC thread and into its
own work queue.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Replace call to Get Port DataBase MB with PDO_FORCE_ADISC
flag with async ADISC command so driver can see ADISC command
has error or not.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adjusts and reallocates fw_dump memory for target mode
to save for extended login and exchange offload buffers into
dump captured.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use IOCB patch to submit Control VP MBX command to reduce
bottle-neck for mbx interface.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

when processing iocb in a timeout case, driver was trying to log messages
without verifying if the fcport structure could have valid data. This
results in a NULL pointer access.

Fixes: 726b8548("qla2xxx: Add framework for async fabric discovery")
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When driver is loaded in Target/Dual mode, it creates QPair to support
MQ and allocates resources for each QPair. This Qpair initialization is
delayed until the FW personality is changed to Dual/Target mode by
issuing chip reset. At the time of chip reset firmware is re-initilized
in correct personality all the QPairs are initialized by sending
MBC_INITIALIZE_MULTIQ (001Fh).

This patch fixes memory leak by adding check to issue
MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the
flag is set for initiator mode, and clean up QPair resources correctly
during the driver unload. This MBX does not need to be issued for
Target/Dual mode because chip reset will reset ISP.

Fixes: d65237c7 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch defers processing of GS IOCB calls from interrupt context to
avoid hardware spinlock recursion.

Following stack trace is seen

? mod_timer+0x193/0x330
? ql_dbg+0xa7/0xf0 [qla2xxx]
_raw_spin_lock_irqsave+0x31/0x40
qla2x00_start_sp+0x3b/0x250 [qla2xxx]
qla24xx_async_gnl+0x1d3/0x240 [qla2xxx]
qla24xx_fcport_handle_login+0x285/0x290 [qla2xxx]
? vprintk_func+0x20/0x50

Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If user swaps one target port for another target port for same switch
port, the new target port is not being recognized by the driver. Current
code assumes that old Target port has recovered from link down. The fix
will ask switch what is the WWPN of a specific NportID (GPNID) rather
than assuming it's the same Target port which has came back.

Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch returns discovery state machine back to Login Complete.

Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When NPort Handle is in use, driver needs to mark the handle as used and
pick another. Instead, the code clears the handle and re-pick the same
handle.

Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: qla2xxx-upstream@qlogic.com
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Tested-by: NBart Van Assche <Bart.VanAssche@wdc.com>

In some environments, user can choose to not enable SCSI-MQ but wants to
use FC-NVMe feature of the driver. Since driver relies on Q-Pairs to
allocate FC-NVMe resources, use existing module parameter to create
Q-Pairs when FC-NVMe is enabled.
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If we discovered a topology that is N2N then we will issue a login to
the target. If our WWPN is bigger than the target's WWPN then we will
initiate login, otherwise we will just wait for the target to initiate
login.

[mkp: many whitespace errors]
Signed-off-by: NDuane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Tested-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After relogin is sucessful, "send_els_logo" flag needs to be
reinitialized. This will allow next re-login to happen successfully.

In target mode, this flag was not reset correctly, causing IO's failure
during reset recovery and port ON/OFF test cases from initiator.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NSawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NDarren Trap <darren.trap@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When RSCN is delivered for specific remote port. Use ADISC to verify the
session is still valid or not.
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>