This is needed by things like USB storage that want to set up static
commands for later use at start of day.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Since the way we allocate commands with a separate sense buffer is
getting complicated, we should isolate setup and teardown to a single
routine so that if it gets even more complex, there's only one place
in the code that needs to be altered.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Adam Radford <linuxraid@amcc.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This rewrites tw_transfer_internal with scsi_sg_copy_from/to_buffer.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Adam Radford <linuxraid@amcc.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This replaces stex_internal_copy with scsi_sg_copy_to/from_buffer.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NEd Lin <ed.lin@promise.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This replaces aac_internal_transfer with scsi_sg_copy_to/from_buffer.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NMark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This rewrites ips_scmd_buf_write/read with scsi_sg_copy_from/to_buffer
respectively.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NSalyzyn, Mark <Mark_Salyzyn@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This replaces simscsi_fillresult with scsi_sg_copy_from_buffer.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Note that if scsi_bufflen(cmd) is not zero, the command always has an
sg list. So this patch doesn't do the error checking in
fill_from_dev_buffer and fetch_to_dev_buffer did.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Looks-OK-to: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Douglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

LLDs need to copies data between the SG table in struct scsi_cmnd and
liner buffer. So they use the helper functions like

sg_copy_from_buffer(scsi_sglist(sc), scsi_sg_count(sc), buf, buflen)
sg_copy_to_buffer(scsi_sglist(sc), scsi_sg_count(sc), buf, buflen)

This patch just adds wrapper functions:

scsi_sg_copy_from_buffer(sc, buf, buflen)
scsi_sg_copy_to_buffer(sc, buf, buflen)
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This patch adds new three helper functions to copy data between an SG
list and a linear buffer.

- sg_copy_from_buffer copies data from linear buffer to an SG list

- sg_copy_to_buffer copies data from an SG list to a linear buffer

When the APIs copy data from a linear buffer to an SG list,
flush_kernel_dcache_page is called. It's not necessary for everyone
but it's a no-op on most architectures and in general the API is not
used in performance critical path.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

We've verified that there are 64 bit and endianness problems in the
flashpoint driver.  Reverse the logic of CONFIG_OMIT_FLASHPOINT (make
it CONFIG_SCSI_FLASHPOINT) and make it depend on X86_32 so it can't
appear for any other architectures.  Long term, if someone chooses,
they could make FlashPoint 64 bit compliant (it looks like its a
question of fixing up the sizes in some of the packed descriptors)
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

When a FSF physical close returns the status boxed, this means that
another system already closed the port. For our system this is the
same status as in the good path, we have to send the normal close. So,
set the status for the boxed response to the same as for the good
status.
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NMartin Peschke <mp3@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

the semaphore inactive_list_mutex is used as a mutex, convert it to
the mutex API
Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net>
Acked-by: N"Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This patch modifies the driver to enable MSI by default for all SAS chips.
Signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

[based on proposal from Mike Christie <michaelc@cs.wisc.edu>, this
patch adds some simplifications to the handler functions]

With the new target reset handler callback in the SCSI midlayer, the
device reset handler in zfcp can be split in two parts. Now, zfcp does
not have to track anymore whether the device supports LUN resets, so
remove this flag and let the SCSI midlayer decide what to do.

The device reset handler simply issues a LUN reset and the target
reset handler a target reset.
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This patch adds target reset functionalty.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NDavid Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The problem is that serveral drivers are sending a target reset from the
device reset handler, and if we have multiple devices a target reset gets
sent for each device when only one would be sufficient. And if we do a target
reset it affects all the commands on the target so the device reset handler
code only cleaning up one devices's commands makes programming the driver a
little more difficult than it should be.

This patch adds a target reset handler, which drivers can use to send
a target reset. If successful it cleans up the commands for a devices
accessed through that starget.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

As we no longer need to calculate the data length of the whole scatterlist,
we can abort the loop earlier and coalesce req_len and act_len into one
variable, making fill_from_dev_buffer() more similar to fetch_to_dev_buffer().
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

scsi_debug.h just incldues some function declarations. This patch removes it
with moving the scsi_host_template.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This converts scsi_debug to include header files in include/scsi/
instead of drivers/scsi/scsi.h.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Lots of drivers set it to 0. Remove that. Patch should be a nop.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

When aacraid spoofs READ_CAPACITY_16, it assumes that the data length
in the sg list is equal to allocation length in cdb. But sg can put
any value in scb so the driver needs to check both the data length in
the sg list and allocation length in cdb.

If allocation length is larger than the response length that the
driver expects, it clears the data buffer in the sg list to zero but
it doesn't need to do. Just setting resid is fine.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NMark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Show the current binary tape driver and mode options is sysfs. A file
(options) is created in each directory in /sys/class/scsi_tape. The files
contain masks showing the options. The mask bit definitions are the same as
used when setting the options using the MTSETDRVBUFFER function in the
MTIOCTOP ioctl (defined in include/linux/mtio.h). For example:
> cat /sys/class/scsi_tape/nst0/options
0x00000d07

[jejb: updated doc with correction from Randy Dunlap]
Signed-off-by: NKai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Add new option MT_ST_SILI to enable setting the SILI bit in reads in variable
block mode. If SILI is set, reading a block shorter than the byte count does
not result in CHECK CONDITION. The length of the block is determined using the
residual count from the HBA. Avoiding the REQUEST SENSE command for every
block speeds up some real applications considerably.
Signed-off-by: NKai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

These are no longer necessary.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Tested-by: NJoerg Dorchain: <joerg@dorchain.net>
Tested-by: NStefan Priebe <s.priebe@allied-internet.ag>
Tested-by: NJon Chelton <jchelton@ffpglobal.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If the aic94xx chip doesn't have a SAS address in the chip's flash memory,
make libsas get one for us.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Provide a facility to use the request_firmware() interface to get a SAS
address from userspace.  This can be used by SAS LLDDs that cannot
obtain the address from the host adapter.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

I overlooked ips_scmd_buf_write and ips_scmd_buf_read when I converted
ips to use the data buffer accessors.

ips is unlikely to use sg chaining (especially in this path) since a)
this path is used only for non I/O commands (with little data
transfer), b) ips's sg_tablesize is set to just 17.

Thanks to Tim Pepper for testing this patch.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NMark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

- remove PCI device sort, which greatly simplifies PCI probe,
  permitting direct, per-HBA function calls rather than an indirect
  route to the same end result.

- remove need for pcistr[]
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

- Reduce uses of gdth_pci_str::pdev, preferring a local variable
  (or function arg) 'pdev' instead.

- Reduce uses of gdth_pcistr array, preferring local variable
  (or function arg) 'pcistr' instead.

- Eliminate lone use of gdth_pci_str::irq, using equivalent
  pdev->irq instead

- Eliminate assign-only gdth_pci_str::io_mm

Note:  If the indentation seems weird, that's because a line was
converted from spaces to tabs, when it was modified.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  fix endian lossage in forcedeth
  net/tokenring/olympic.c section fixes
  net: marvell.c fix sparse shadowed variable warning
  [VLAN]: Fix egress priority mappings leak.
  [TG3]: Add PHY workaround for 5784
  [NET]: srandom32 fixes for networking v2
  [IPV6]: Fix refcounting for anycast dst entries.
  [IPV6]: inet6_dev on loopback should be kept until namespace stop.
  [IPV6]: Event type in addrconf_ifdown is mis-used.
  [ICMP]: Ensure that ICMP relookup maintains status quo

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix user accesses in regset code.
  [SPARC64]: Fix FPU saving in 64-bit signal handling.

* 'pci_id_updates' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (7497): pvrusb2: add new usb pid for 73xxx models
  V4L/DVB (7496): pvrusb2: add new usb pid for 75xxx models

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (7499): v4l/dvb Kconfig: Fix bugzilla #10067
  V4L/DVB (7495): s5h1409: fix blown-away bit in function s5h1409_set_gpio
  V4L/DVB (7460): bttv: Bt832 - fix possible NULL pointer deref