- 05 6月, 2012 14 次提交
-
-
由 Arik Nemtsov 提交于
Define the FW pc in the 18xx register translation table. This specific register is only valid in the boot partition, so change the momentarily change partitions. This doesn't damage 12xx cards, where the FW pc is accessible via boot partition as well. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Add a HW op to add extra enabled rates for AP-mode data-rates. Since the rates might depend on channel properties, reconfigure AP-mode rates when these change. Implement the HW op for the 18xx family, where MIMO or wide-chan rates can be added. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Parse the peer ht_cap element containing MCS8-MCS15 rates and pass it to the FW. Rates unsupported by the HW will be sanitized by mac80211 before reaching us. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Enable wide-chan or MIMO rates when appropriate. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Translate the NL80211 channel type to a FW-specific channel type and send it to the FW as part of the role-start command. For wl12xx this has no effect - this element is treated as padding. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Track the current 802.11 channel type, defaulting to a NO_HT channel. Update the channel type element when changed by mac80211. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Some chip families can checksum certain classes of Rx packets in FW. Implement the Rx-checksum feature as a HW-op. For the 18xx chip-family, set Rx-checsum according to indication from FW. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Some chip families are capable of checksumming certain classes of Tx packets in HW. Indicate this fact in the netdev features and perform the HW checksum by protocol type for the 18xx family. Fix the location of the skb network header when we move it so we can rely on it when setting the checksum. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Add wl18xx-specific HW initialization operation and create acx.[ch] files to support that. Signed-off-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NArik Nemtsov <arik@wizery.com>
-
由 Arik Nemtsov 提交于
Implement immediate Tx completion for the 18xx family. Move 18xx specific Tx code to new tx.c/h files and create helper header files for definitions. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Implement the HW op for getting alignment state in wl18xx. The FW aligns the Rx Ethernet payload data. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Define HW-rate conversion tables for the 18xx chip. Initialize the appropriate wlcore elements with these tables and values to allow conversion of HW-rates. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Add the 18xx variant to the HW Tx descriptor union and set the 18xx specific values during Tx. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
At least in PG1, the wl18xx chips use the same SDIO vendor/device ID, so it's not possible to figure out which driver is to be used. As a workaround, we can check the SDIO revision number, because wl18xx uses 3.00 and wl12xx does not. Signed-off-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NArik Nemtsov <arik@wizery.com>
-
- 30 5月, 2012 1 次提交
-
-
由 Eyal Shapira 提交于
commit c21eebb5 "wl12xx: add RX filters ACX commands" breaks the build when CONFIG_PM isn't defined: ERROR: "wl1271_rx_filter_get_fields_size" [drivers/net/wireless/ti/wlcore/wlcore.ko] undefined! ERROR: "wl1271_rx_filter_flatten_fields" [drivers/net/wireless/ti/wlcore/wlcore.ko] undefined! code in drivers/net/wireless/ti/wlcore/acx.c is using these functions unconditionally while they are #ifdefed CONFIG_PM. Fix it by ifdefing all relevant RX filters code with CONFIG_PM. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NEyal Shapira <eyal@wizery.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 5月, 2012 2 次提交
-
-
由 Luciano Coelho 提交于
There were three sparse warnings in main.c due to missing static declaration: CHECK drivers/net/wireless/ti/wlcore/main.c drivers/net/wireless/ti/wlcore/main.c:1265:5: warning: symbol 'wl1271_validate_wowlan_pattern' was not declared. Should it be static? drivers/net/wireless/ti/wlcore/main.c:1408:5: warning: symbol 'wl1271_convert_wowlan_pattern_to_rx_filter' was not declared. Should it be static? drivers/net/wireless/ti/wlcore/main.c:4823:6: warning: symbol 'wl1271_connection_loss_work' was not declared. Should it be static? Fix these by adding the static declaration to those functions. Signed-off-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
The debug print in wl1271_acx_set_rx_filter() was causing the following warning: CC drivers/net/wireless/ti/wlcore/acx.o drivers/net/wireless/ti/wlcore/acx.c: In function ‘wl1271_acx_set_rx_filter’: drivers/net/wireless/ti/wlcore/acx.c:1759:2: warning: cast from pointer to integer of different size Instead of casting the pointer to an integer, use %p to print it our instead. Reported-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 5月, 2012 10 次提交
-
-
Make use of REGAINED_BSS_EVENT and instead of reporting connection loss immediately on each BEACON_LOSE event, try if not regained in reasonable period of time. Signed-off-by: Nbartosz.markowski <bartosz.markowski@tieto.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Jesper Juhl 提交于
We currently do this: int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, struct wl12xx_vif *wlvif) ... struct wl12xx_arp_rsp_template *tmpl; struct ieee80211_hdr_3addr *hdr; ... tmpl = (struct wl12xx_arp_rsp_template *)skb_put(skb, sizeof(*tmpl)); memset(tmpl, 0, sizeof(tmpl)); ... hdr = (struct ieee80211_hdr_3addr *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(hdr)); ... I believe we want to set the entire structures to 0 with those memset() calls, not just zero the initial part of them (size of the pointer bytes). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Randy Dunlap 提交于
wl12xx build fails with many undefined symbol errors when MAC80211 and CFG80211 are not enabled, so make WLCORE and WL12XX depend on MAC80211 (which already depends on CFG80211). Here are a few of the many build errors: drivers/built-in.o: In function `wl1271_register_hw': main.c:(.text+0x4197cd): undefined reference to `ieee80211_register_hw' drivers/built-in.o: In function `wl1271_rx_streaming_timer': main.c:(.text+0x419818): undefined reference to `ieee80211_queue_work' drivers/built-in.o: In function `wl1271_flush_deferred_work': main.c:(.text+0x419910): undefined reference to `ieee80211_rx' main.c:(.text+0x419938): undefined reference to `ieee80211_tx_status' drivers/built-in.o: In function `wl12xx_op_channel_switch': main.c:(.text+0x419afc): undefined reference to `ieee80211_chswitch_done' drivers/built-in.o: In function `wl1271_ssid_set': drivers/built-in.o: In function `wl1271_event_process': event.c:(.text+0x41fec4): undefined reference to `ieee80211_sched_scan_stopped' event.c:(.text+0x41ff88): undefined reference to `ieee80211_cqm_rssi_notify' event.c:(.text+0x42000d): undefined reference to `ieee80211_stop_rx_ba_session' event.c:(.text+0x420048): undefined reference to `ieee80211_stop_rx_ba_session' event.c:(.text+0x4200b8): undefined reference to `ieee80211_chswitch_done' event.c:(.text+0x4201ae): undefined reference to `ieee80211_find_sta' event.c:(.text+0x4201ba): undefined reference to `ieee80211_report_low_ack' event.c:(.text+0x42021b): undefined reference to `ieee80211_connection_loss' drivers/built-in.o: In function `wl1271_tx_complete_packet': tx.c:(.text+0x4206a6): undefined reference to `ieee80211_get_hdrlen_from_skb' drivers/built-in.o: In function `wl1271_tx_fill_hdr': tx.c:(.text+0x4208ca): undefined reference to `ieee80211_hdrlen' drivers/built-in.o: In function `wl1271_handle_tx_low_watermark': (.text+0x420e25): undefined reference to `ieee80211_wake_queue' drivers/built-in.o: In function `wl12xx_rearm_rx_streaming': (.text+0x420ed9): undefined reference to `ieee80211_queue_work' drivers/built-in.o: In function `wl1271_tx_work_locked': (.text+0x421008): undefined reference to `ieee80211_free_txskb' drivers/built-in.o: In function `wl1271_rx_status.clone.2': rx.c:(.text+0x421593): undefined reference to `ieee80211_channel_to_frequency' drivers/built-in.o: In function `wl1271_ps_filter_frames': ps.c:(.text+0x421a41): undefined reference to `ieee80211_tx_status' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Luciano Coelho <coelho@ti.com> Cc: linux-wireless@vger.kernel.org Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Dan Carpenter 提交于
GFP_DMA isn't supposed to be used by itself. This allocation is allowed to sleep so it should be ORing it with GFP_KERNEL. Also we should check for allocations errors. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Dan Carpenter 提交于
We should release this lock before returning. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eyal Shapira 提交于
Use FW RX data filters to support cfg80211 wowlan wakeup patterns. This enables to wake up the host from suspend following detection of certain configurable patterns within an incoming packet. Up to 5 patterns are supported. Once the host is resumed any configured RX data filter is cleared. A single pattern can match several bytes sequences with different offsets within a packet. Signed-off-by: NEyal Shapira <eyal@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eyal Shapira 提交于
More prep work to support wowlan wakeup patterns. Added some wrappers that also keep the current filters state updated in the driver. Signed-off-by: NEyal Shapira <eyal@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eyal Shapira 提交于
More prep work for wowlan patterns. Added ACXs to set global RX filter behavior and enable or disable a specific filter. Signed-off-by: NEyal Shapira <eyal@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eyal Shapira 提交于
This is prep work for the support of wowlan patterns using the FW data rx filters mechanism. Added an rx filter struct and some util functions required to manipulate it. Signed-off-by: NEyal Shapira <eyal@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
GFP_DMA should not be used by itself, it still needs GFP_KERNEL or such. Fix two occurrences of allocations with GFP_DMA only. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 12 4月, 2012 13 次提交
-
-
由 Arik Nemtsov 提交于
Add room for a private data struct at the end of the common FW status. Add a convenience "counters" struct inside the FW status. The wl12xx family does not currently use the FW status private data. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Allow preventing HW recovery from a module param. The driver/FW will remain stuck, to allow easier FW debugging. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Different chip families have different firmware versions, so we need to identify the firmware to enable quirks, reject the used version etc. in the lower drivers. This commit turns the fw_ver_quirks function into an identify_fw operation. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
The max Rx aggregation subframes configured to FW must be the same number given to the upper layers (mac80211). Derive both from the same value, given in the conf struct. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Set HT capabilities in the low-level HW driver. These are then used by wlcore when registering with mac80211. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
In some chip-families, there are operating modes where we must mask-out certain Tx rates, and/or tweak the rate-mask with special HW-specific bits. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Instead of having two memory configuration sets, one for wl127x and one for wl128x, we can use only one which should be correctly set by the lower driver. The wl12xx driver now uses the wl128x memory config by default but changes it when if it identifies the wl127x chips. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
The extended radio configuration parameters are only used by the wl127x chipsets, which are handled by the wl12xx driver. Move the rf configuration settings from wlcore to wl12xx. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
The configuration parameters vary with different chip families. Some of the parameters used only by some chip families, others should have different value depending on the family. Thus move the configuration values from wlcore to wl12xx. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Change the cmd_trigger op to include the write of the command buffer. Also, instead of letting the lower driver access the cmd_box_addr element directly, we now pass the address in the trigger_cmd operation, so it doesn't have to be exported. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Add an op for family-specific vif initialization. Currently unused, but will be needed when wl18xx support is implemented. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Move all the wl12xx-specific hw initialization procedures into a new hw_init op. Move some commands and ACX functions to wl12xx. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Inverting the quirk flag to indicate Tx-alignment. This aligns it with the similar Rx-side quirk. The call to wl1271_set_block_size() decides whether SDIO block size alignment can be used or not. In case we're using SPI, we can't use the block size alignment, so the function returns false. So we set the quirk when wl1271_set_block_size() returns true and let the wl12xx lower driver unset the bit for wl127x (since it doesn't support this quirk). Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-