Correct fix for the "ioremap() causes build failure on S390" should have been
a dependancy on HAS_IOMEM. So we add this dependancy also (and leave the driver
in the ARM section for now).
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch allows Watchdog timer to be selected for OMAP4 by fixing
Kconfig entry
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use of ioremap() causes build failure on S390.
Restrict the driver to ARM until another architecture comes along
and enables the driver for its own use.
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

This patch corrects author and copyright notices  following the split-up of
the GE Fanuc joint venture.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This driver adds support for the max63{69,70,71,72,73,74} family of
watchdog timer chips.

It has been tested on an Arcom Zeus (max6369).
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Technologic Systems TS-72xx SBCs have external glue logic
CPLD which includes watchdog timer. This driver implements
kernel support for that.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Replace ARCH_OMAP34XX with ARCH_OMAP3
Signed-off-by: NTony Lindgren <tony@atomide.com>

Convert ARCH_OMAP24XX to ARCH_OMAP2
Signed-off-by: NTony Lindgren <tony@atomide.com>

The mdelay function was used between I/O access commands, that causes peak
in CPU usage. Fix it by substitution mdelay to msleep.

Expand usage on fitPC2 compatible boards according to DMI identification.
Signed-off-by: NDenis Turischev <denis@compulab.co.il>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Update to the new cs5535_mfgpt* API.  The geode-specific wording should
eventually be dropped from this driver...
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The platform has never been fully merged 
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>

Remove the old WDT implementation.
Signed-off-by: NAlbrecht Dreß <albrecht.dress@arcor.de>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch adds support for the watchdog timer on Avionic Design Xanthos
boards.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The WM831x series of devices provide a watchdog with configurable
behaviour on timer expiry.

Currently this driver support refreshes via a register or GPIO line and
autonomous refreshes from a hardware source (eg, a clock).
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add watchdog device driver for the Nuvoton NUC900 series SoCs.
Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add support for watchdog found on SBC-FITPC2 board.
Signed-off-by: NDenis Turischev <denis@compulab.co.il>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Change the wdt_pci.c watchdog driver so that the code is the same for
both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501_PCI.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This add watchdog driver for broadcom 47xx device.
It uses the ssb subsytem to access embeded watchdog device.

Because the watchdog timeout is very short (about 2s), a soft timer is used
to increase the watchdog period.

Note : A patch for exporting the ssb_watchdog_timer_set will
be submitted on next linux-mips merge. Without this patch it can't 
be build as a module.
Signed-off-by: NAleksandar Radovanovic <biblbroks@sezampro.rs>
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Tested-by: NFlorian Fainelli <florian@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>                                                                                       
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Add watchdog timer support for Freescale STMP3xxx boards
Signed-off-by: NVitaly Wool <vital@embeddedalley.com>
Signed-off-by: NDmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Implementation of twl4030 watchdog driver.
Signed-off-by: NTimo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: NAtal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds support for the U300 COH 901 327 watchdog for the
U300 platform recently added to RMK:s ARM tree.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add support for PNX833x watchdog timer.
Signed-off-by: NDaniel Laird <daniel.j.laird@nxp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

.ko is normally not included in Kconfig help, make it consistent.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Orion watchdog driver is also used on Kirkwood.

Convention is to use orion5x for stuff specific to 88F5xxx Orion chips
and simply "orion" for shared stuff across SoCs including Kirkwood.
Signed-off-by: NNicolas Pitre <nico@marvell.com>

The Kirkwood architecture uses the same watchdog device as the Orion
architecture. This patch adds orion5x_wdt as a platform device for
Kirkwood.
Signed-off-by: NThomas Reitmayr <treitmayr@devbase.at>
Tested-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

Removes ARM26 sections from Kconfig and Makefile, because
ARM26 is long gone.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Change the wdt.c watchdog driver so that the code is the same for
both the WDT500 as the WDT501-P card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

bugzilla: #12363
commit 7cd5b08b added a second regression:
some Dell's and Compaq's lockup on boot. So we revert most of the code.
The ICH9 reboot issue remains in place and will need some more fixing... :-(
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's SBC310, a 3U single board
computer, based on Freescale's MPC8641D.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The driver was updated for OMAP34xx, but the Kconfig file was missed.
So this adds the missing parts from d99241c in Tony Lindgren's tree:

    Add watchdog timer support for TI OMAP3430.
Signed-off-by: NMadhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The FPGA based watchdog timer used by the Pika Warp appliance.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

GE Fanuc SBC610

Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.

This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This driver implements support for the watchdog functionality provided
by the Wolfson Microelectronics WM8350, a multi-function audio and
power management subsystem intended for use in embedded systems. It is
based on a driver originally written by Graeme Gregory, though it has
been extensively modified since then.

Use of a GPIO to kick the watchdog is not yet supported.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Add a watchdog driver for the hardware watchdog timer on the
SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset.
Tested-by: NMarco Chiappero <marco@absence.it>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and
CAP9 processors.
Update the configuration to indicate this and allow the driver to be selected.
Signed-off-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

This patch allows the use of the hardware watchdog in the
Marvell Orion series of ARM SoCs.
Signed-off-by: NSylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add a driver for the watchdog timer embedded into AT91SAM9X chips.
Signed-off-by: NRenaud Cerrato <r.cerrato@til-technologies.fr>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, 
found on MSI Fuzzy CX700 boards.

The method used is taken directly from the winbond datasheet and 
surprisingly it differs slightly from all the other winbond watchdogs.

So far it has only been tested on the CX700 board that I have, but it 
seems to work nicely.
Signed-off-by: NFlemming Frandsen <ff@nrvissing.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add it87xx watchdog driver
IT8716 IT8718 IT8726 IT8712-J IT8712-K
Signed-off-by: NOliver Schuster <olivers137@aol.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>