- 08 9月, 2006 4 次提交
-
-
由 Steven Whitehouse 提交于
This removes one of the typedefs from the locking interface. It is replaced by a forward declaration of the gfs2 superblock. The other two are not so easy to solve since in their case, they can refer to one of two possible structures. Cc: David Teigland <teigland@redhat.com> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Excatly as the subject line says. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
There are several reasons why we want to do this: - Firstly its large and thus we'll scale better with multiple GFS2 fs mounted at the same time - Secondly its easier to scale its size as required (thats a plan for later patches) - Thirdly, we can use kzalloc rather than vmalloc when allocating the superblock (its now only 4888 bytes) - Fourth its all part of my plan to eventually be able to use RCU with the glock hash. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This is another patch preparing for sharing of the glock hash table between different gfs2 mounts. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 07 9月, 2006 4 次提交
-
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's request. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Use snprintf(buf, PAGE_SIZE, ...) instead of sprintf in sysfs show methods. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Use snprintf(buf, PAGE_SIZE, ...) instead of sprintf for sysfs show methods. Per instructions in Documentation/filesystems/sysfs.txt Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Jan Engelhardt 提交于
Remove redundant brackets Signed-off-by: NJan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 06 9月, 2006 5 次提交
-
-
由 Steven Whitehouse 提交于
Ass a comment explaining the slightly odd construct used to pass error values back. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's follow up emails, here are a few small fixes which were missed earlier. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's request, some unused code is removed and some consts added in the quota code. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's comments, removed some unused code and removed some brackets which were not required. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's request and also a few of my own. It has been possible to add a few most const to the code as a result of the change in gfs2_ea_name2type. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 05 9月, 2006 13 次提交
-
-
由 Steven Whitehouse 提交于
Change one constant plus remove a redundant !!. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's request, I've added a ',' to the end of each of the multi-line structures which didn't already have one (most already did). Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's comments, this should make all the headers compile on their own by including and/or declaring structures early. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per comments from Jan Engelhardt, remove redundant casts, redundant endian conversions, add a smattering of const and rewrite the dirent_next function in order to avoid as many casts as possible. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Introduce a couple of new constants which make the NFS filehandle sizes that GFS2 uses a bit clearer. Also fix one or two minor issues as per Jan Engelhardt's sixth email. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's fifth email. This has most of the changes recommended, which is the removal of casts which are not required, some indenting fixes and similar. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per the remainder of Jan Engelhardt's fourth email comments, remove an cast thats not required. Also tidy up the "limit" code in stuck_releasepage(). Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
A spelling mistake (one of mine). Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Use const in endian conversion and printing of on-disk structures. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's fourth email, this is the first part of the change set with a few minor style points. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The remains of the changes for Jan Engelhardt's third email. Remove a cast and tidy up gfs2_inode_attr_in. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This makes all fixed size types have consistent names. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This makes everything consistent. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 04 9月, 2006 5 次提交
-
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's third set of comments, this make various code style changes and moves the structures from format.h into super.c, which was the only place that format.h was actually used. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
-
由 Steven Whitehouse 提交于
As per Jan Engelhardt's second email, this removes some unused code, and fixes up indenting in various places. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Linus Torvalds 提交于
-
由 Benjamin Herrenschmidt 提交于
New sparse caught that typo which could have caused erratic hardware behaviour on some machines if the platform functions are used by the firmware to change bits in some FCR registers. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 9月, 2006 4 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: constify some serial structs [SERIAL] Make uart_match_port() work with all memory mapped UARTs
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3762/1: Fix ptrace cache coherency bug for ARM1136 VIPT nonaliasing Harvard caches [ARM] 3765/1: S3C24XX: cleanup include/asm-arm/arch-s3c2410/dma.h [ARM] 3764/1: S3C24XX: change type naming to kernel style [ARM] 3763/1: add both rtcs to csb337 defconfig [ARM] Fix ARM __raw_read_trylock() implementation [ARM] 3750/3: Fix double VFP emulation for EABI kernels
-
由 Oleg Nesterov 提交于
It is not possible to find a sub-thread in ->children/->ptrace_children lists, ptrace_attach() does not allow to attach to sub-threads. Even if it was possible to ptrace the task from the same thread group, we can't allow to release ->group_leader while there are others (ptracer) threads in the same group. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 George G. Davis 提交于
Patch from George G. Davis Resolve ARM1136 VIPT non-aliasing cache coherency issues observed when using ptrace to set breakpoints and cleanup copy_{to,from}_user_page() while we're here as requested by Russell King because "it's also far too heavy on non-v6 CPUs". NOTES: 1. Only access_process_vm() calls copy_{to,from}_user_page(). 2. access_process_vm() calls get_user_pages() to pin down the "page". 3. get_user_pages() calls flush_dcache_page(page) which ensures cache coherency between kernel and userspace mappings of "page". However flush_dcache_page(page) may not invalidate I-Cache over this range for all cases, specifically, I-Cache is not invalidated for the VIPT non-aliasing case. So memory is consistent between kernel and user space mappings of "page" but I-Cache may still be hot over this range. IOW, we don't have to worry about flush_cache_page() before memcpy(). 4. Now, for the copy_to_user_page() case, after memcpy(), we must flush the caches so memory is consistent with kernel cache entries and invalidate the I-Cache if this mm region is executable. We don't need to do anything after memcpy() for the copy_from_user_page() case since kernel cache entries will be invalidated via the same process above if we access "page" again. The flush_ptrace_access() function (borrowed from SPARC64 implementation) is added to handle cache flushing after memcpy() for the copy_to_user_page() case. Signed-off-by: NGeorge G. Davis <gdavis@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 9月, 2006 5 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: uhci-hcd: fix list access bug USB: Support for ELECOM LD-USB20 in pegasus USB: Add VIA quirk fixup for VT8235 usb2 USB: rtl8150_disconnect() needs tasklet_kill() USB Storage: unusual_devs.h for Sony Ericsson M600i USB Storage: Remove the finecam3 unusual_devs entry UHCI: don't stop at an Iso error usb gadget: g_ether spinlock recursion fix USB: add all wacom device to hid-core.c blacklist hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist USB floppy drive SAMSUNG SFD-321U/EP detected 8 times
-
由 Benjamin Herrenschmidt 提交于
Fix some more problems (inverted use of semaphores in some places). He also moved my checks into within the protected section which is better. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Badari Pulavarty 提交于
Missed a place where I forgot to convert kfree() to kmem_cache_free() as part of jbd-manage-its-own-slab changes. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nishanth Aravamudan 提交于
Since vma->vm_pgoff is in units of smallpages, VMAs for huge pages have the lower HPAGE_SHIFT - PAGE_SHIFT bits always cleared, which results in badd offsets to the interleave functions. Take this difference from small pages into account when calculating the offset. This does add a 0-bit shift into the small-page path (via alloc_page_vma()), but I think that is negligible. Also add a BUG_ON to prevent the offset from growing due to a negative right-shift, which probably shouldn't be allowed anyways. Tested on an 8-memory node ppc64 NUMA box and got the interleaving I expected. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAdam Litke <agl@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Acked-by: NChristoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 John Keller 提交于
Fix some bugs in the patch that converted the IOC4 driver from port IO ops to memio ops. http://marc.theaimsgroup.com/?l=linux-ide&m=114895892231438&w=2 Problems fixed are: - Call to default_hwif_mmiops() was not being done until _after_ first IO operation, resulting in the first IO operation being done as a port IO op, instead of memio. - request_region() calls needed to be request_mem_region() - Incomplete error case handling. - Non-usage of ioremap() and __iomem. Signed-off-by: NJohn Keller <jpk@sgi.com> Signed-off-by: NJeremy Higdon <jeremy@sgi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-