Make the FRV arch use the generic IRQ code rather than having its own
routines for doing so.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the generic time stuff for FRV.
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce the use of asm-offsets into the FRV architecture.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add coredump capability for the ELF-FDPIC binfmt.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some FRV arch compile errors, including:

 (*) Marking nr_kernel_pages as __meminitdata so that references to it end up
     being properly calculated rather than being assumed to be in the small
     data section (and thus calculated wrt the GP register).  Not doing this
     causes the linker to emit errors as the offset is too big to fit into the
     load instruction.

 (*) Move pm_power_off into an unconditionally compiled .c file as it's now
     unconditionally accessed.

 (*) Declare frv_change_cmode() in a header file rather than in a .c file, and
     declare it asmlinkage.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/linux/version.h contained both actual KERNEL version
and UTS_RELEASE that contains a subset from git SHA1 for when
kernel was compiled as part of a git repository.
This had the unfortunate side-effect that all files including version.h
would be recompiled when some git changes was made due to changes SHA1.
Split it out so we keep independent parts in separate files.

Also update checkversion.pl script to no longer check for UTS_RELEASE.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: N"Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- When setting a sighandler using sigaction() call, if the flag
  SA_ONSTACK is set and no alternate stack is provided via sigaltstack(),
  the kernel still try to install the alternate stack.  This behavior is
  the opposite of the one which is documented in Single Unix Specifications
  V3.

- Also when setting an alternate stack using sigaltstack() with the flag
  SS_DISABLE, the kernel try to install the alternate stack on signal
  delivery.

These two use cases makes the process crash at signal delivery.
Signed-off-by: NLaurent Meyer <meyerlau@fr.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove duplicate EXPORT_SYMBOL annotations from the FRV arch.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The FRV arch should use fstatat64 not newfstatat.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add __user annotations to FRV-specific sysctl stuff.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add annotations to the FRV signal handling for sparse.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add general annotations to the FRV arch for sparse.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While cleaning up parisc_ksyms.c earlier, I noticed that strpbrk wasn't
being exported from lib/string.c.  Investigating further, I noticed a
changeset that removed its export and added it to _ksyms.c on a few more
architectures.  The justification was that "other arches do it."

I think this is wrong, since no architecture currently defines
__HAVE_ARCH_STRPBRK, there's no reason for any of them to be exporting it
themselves.  Therefore, consolidate the export to lib/string.c.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For some architectures, a few syscalls are not linked in noMMU mode.  In
that case, the MMU depending syscalls are needed to be defined as
'cond_syscall'.  For example, ARM architecture selectively links sys_mlock
by the mode configuration.

In case of FRV, it has been managed by #ifdef CONFIG_MMU macro in
arch/frv/kernel/entry.S.  However these conditional macros are just
duplicates if they were defined as cond_syscall.  Compilation test is done
with FRV toolchains for both of MMU and noMMU mode.
Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The only user of get_wchan is the proc fs - and proc can't be built modular.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all.  The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().

This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
few instances of this bug, if any.  But the patch converts lots of open-coded
test to use the preferred helper macros.

Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: NKyle McMartin <kyle@parisc-linux.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Christian Zankel <chris@zankel.net>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sam's tree includes a new check, which found that we're exporting strpbrk()
multiple times.

It seems that the convention is that this is exported from the arch files, so
reove the lib/string.c export.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the FRV arch use virtual interrupt disablement because accesses to the
processor status register (PSR) are relatively slow and because we will
soon have the need to deal with multiple interrupt controls at the same
time (separate h/w and inter-core interrupts).

The way this is done is to dedicate one of the four integer condition code
registers (ICC2) to maintaining a virtual interrupt disablement state
whilst inside the kernel.  This uses the ICC2.Z flag (Zero) to indicate
whether the interrupts are virtually disabled and the ICC2.C flag (Carry)
to indicate whether the interrupts are physically disabled.

ICC2.Z is set to indicate interrupts are virtually disabled.  ICC2.C is set
to indicate interrupts are physically enabled.  Under normal running
conditions Z==0 and C==1.

Disabling interrupts with local_irq_disable() doesn't then actually
physically disable interrupts - it merely sets ICC2.Z to 1.  Should an
interrupt then happen, the exception prologue will note ICC2.Z is set and
branch out of line using one instruction (an unlikely BEQ).  Here it will
physically disable interrupts and clear ICC2.C.

When it comes time to enable interrupts (local_irq_enable()), this simply
clears the ICC2.Z flag and invokes a trap #2 if both Z and C flags are
clear (the HI integer condition).  This can be done with the TIHI
conditional trap instruction.

The trap then physically reenables interrupts and sets ICC2.C again.  Upon
returning the interrupt will be taken as interrupts will then be enabled.
Note that whilst processing the trap, the whole exceptions system is
disabled, and so an interrupt can't happen till it returns.

If no pending interrupt had happened, ICC2.C would still be set, the HI
condition would not be fulfilled, and no trap will happen.

Saving interrupts (local_irq_save) is simply a matter of pulling the ICC2.Z
flag out of the CCR register, shifting it down and masking it off.  This
gives a result of 0 if interrupts were enabled and 1 if they weren't.

Restoring interrupts (local_irq_restore) is then a matter of taking the
saved value mentioned previously and XOR'ing it against 1.  If it was one,
the result will be zero, and if it was zero the result will be non-zero.
This result is then used to affect the ICC2.Z flag directly (it is a
condition code flag after all).  An XOR instruction does not affect the
Carry flag, and so that bit of state is unchanged.  The two flags can then
be sampled to see if they're both zero using the trap (TIHI) as for the
unconditional reenablement (local_irq_enable).

This patch also:

 (1) Modifies the debugging stub (break.S) to handle single-stepping crossing
     into the trap #2 handler and into virtually disabled interrupts.

 (2) Removes superseded fixup pointers from the second instructions in the trap
     tables (there's no a separate fixup table for this).

 (3) Declares the trap #3 vector for use in .org directives in the trap table.

 (4) Moves irq_enter() and irq_exit() in do_IRQ() to avoid problems with
     virtual interrupt handling, and removes the duplicate code that has now
     been folded into irq_exit() (softirq and preemption handling).

 (5) Tells the compiler in the arch Makefile that ICC2 is now reserved.

 (6) Documents the in-kernel ABI, including the virtual interrupts.

 (7) Renames the old irq management functions to different names.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make various alterations and fixes to the FRV arch:

 (1) Resyncs the FRV system call collection with the i386 arch.

 (2) Discards __iounmap() as it's not used.

 (3) Fixes the use of the SWAP/SWAPI instruction to get the arguments the right
     way around in atomic.h, and also to get the asm constraints correct.

 (4) Moves copy_to/from_user_page() to asm/cacheflush.h to be consistent with
     other archs.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled:

        [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc
        [PATCH] 3/3 Generic sys_rt_sigsuspend

It does the following:

 (1) Declares TIF_RESTORE_SIGMASK for FRV.

 (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set.

 (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved
     in current->saved_sigmask.

 (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead.

 (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK
     rather than attempting to fudge the return registers.

 (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping
     intrinsically.

 (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or
     -EFAULT rather than true/false to be consistent with the rest of the
      kernel.

Due to the fact do_signal() is then only called from one place:

 (8) Make do_signal() no longer have a return value is it was just being
     ignored; force_sig() takes care of this.

 (9) Discards the old sigmask argument to do_signal() as it's no longer
     necessary.

This patch depends on the FRV signalling patches as well as the
sys_rt_sigsuspend patch.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

)

From: Adrian Bunk <bunk@stusta.de>

- create one common dump_thread() prototype in kernel.h

- dump_thread() is only used in fs/binfmt_aout.c and can therefore be
  removed on all architectures where CONFIG_BINFMT_AOUT is not
  available
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a number of miscellanous items:

 (1) Declare lock sections in the linker script.

 (2) Recurse in the correct manner in the arch makefile.

 (3) asm/bug.h requires asm/linkage.h to be included first. One C file puts
     asm/bug.h first.

 (4) Add an empty RTC header file to avoid missing header file errors.

 (5) sg_dma_address() should use the dma_address member of a scatter list.

 (6) Add trivial pci_unmap support.

 (7) Add pgprot_noncached()

 (8) Discard u_quad_t.

 (9) Use ~0UL rather than ULONG_MAX in unistd.h in case the latter isn't
     declared.

(10) Add an empty VGA header file to avoid missing header file errors.

(11) Add an XOR header file to use the generic XOR stuff.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Force the 8230 serial driver to be built in if the on-CPU UARTs are to be
used.  It can't be used as a module because the arch setup needs to call into
it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add stubs for FRV module support.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Export a number of features required to build all the modules.  It also
implements the following simple features:

 (*) csum_partial_copy_from_user() for MMU as well as no-MMU.

 (*) __ucmpdi2().

so that they can be exported too.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch improves the signal handling:

 (1) It makes do_signal() static as it isn't called from anywhere outside of
     the arch code.

 (2) It removes the regs argument to all the static functions within that file,
     using __frame instead (which is the same thing held in a global register).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch makes FRV signal handling work properly:

 (1) After do_notify_resume() has been called, the work flags must be checked
     again (there may be another signal to deliver or the process might require
     rescheduling for instance).

 (2) After the signal frame is set up on the userspace stack, ptrace() should
     be given an opportunity to single-step into the signal handler.

 (3) The error state from setting up a signal frame should be passed back up
     the call chain.

 (4) The segfault handler shouldn't be preemptively reset in the arch if we
     fail to deliver a SEGV signal: force_sig() will take care of that.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch implements futex operations for the FRV architecture. The
operations are applicable to both MMU and no-MMU modes; though the EFAULT
handling will be a little bit of wasted space on the latter.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch implements a bunch of small changes to the FRV arch to
make it work again.

It deals with the following problems:

 (1) SEM_DEBUG should be SEMAPHORE_DEBUG.

 (2) The argument list to pcibios_penalize_isa_irq() has changed.

 (3) CONFIG_HIGHMEM can't be used directly in #if as it may not be defined.

 (4) page->private is no longer directly accessible.

 (5) linux/hardirq.h assumes asm/hardirq.h will include linux/irq.h

 (6) The IDE MMIO access functions are given pointers, not integers, and so
     get type casting errors.

 (7) __pa() is passed an explicit u64 type in drivers/char/mem.c, but that
     can't be cast directly to a pointer on a 32-bit platform.

 (8) SEMAPHORE_DEBUG should not be contingent on WAITQUEUE_DEBUG as that no
     longer exists.

 (9) PREEMPT_ACTIVE is too low a value.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since few people need the support anymore, this moves the legacy
pm_xxx functions to CONFIG_PM_LEGACY, and include/linux/pm_legacy.h.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Run idle threads with preempt disabled.

Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()).
How did it ever work before?

Might fix the CPU hotplugging hang which Nigel Cunningham noted.

We think the bug hits if the idle thread is preempted after checking
need_resched() and before going to sleep, then the CPU offlined.

After calling stop_machine_run, the CPU eventually returns from preemption and
into the idle thread and goes to sleep.  The CPU will continue executing
previous idle and have no chance to call play_dead.

By disabling preemption until we are ready to explicitly schedule, this bug is
fixed and the idle threads generally become more robust.

From: alexs <ashepard@u.washington.edu>

  PPC build fix

From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>

  MIPS build fix
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sys_ptrace boilerplate code (everything outside the big switch
statement for the arch-specific requests) is shared by most architectures.
This patch moves it to kernel/ptrace.c and leaves the arch-specific code as
arch_ptrace.

Some architectures have a too different ptrace so we have to exclude them.
They continue to keep their implementations.  For sh64 I had to add a
sh64_ptrace wrapper because it does some initialization on the first call.
For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but
SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-By: NDavid Howells <dhowells@redhat.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Define jiffies_64 in kernel/timer.c rather than having 24 duplicated
defines in each architecture.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>