Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes mostly, for a few changes made in this cycle (the
  intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and
  for some issues that have just been discovered (ACPI PCI IRQ
  management, PCI power management documentation, turbostat), with a
  couple of cleanups on top of them.

  Specifics:

   - intel_idle driver fixup for the recently added Skylake chips
     support (Len Brown).

   - Operating Performance Points (OPP) library fix related to the
     recently added support for new DT bindings and a fix for a typo in
     a comment (Viresh Kumar, Stephen Boyd).

   - ACPI EC driver fix for a recently introduced memory leak in an
     error code path (Lv Zheng).

   - ACPI PCI IRQ management fix for the issue where an ISA IRQ is
     shared with a PCI device which requires it to be configured in a
     different way and may cause an interrupt storm to happen as a
     result with an extra ACPI SCI IRQ handling simplification on top of
     it (Jiang Liu).

   - Update of the PCI power management documentation that became
     outdated and started to actively confuse the readers to make it
     actually reflect the code (Rafael J Wysocki).

   - turbostat fixes including an IVB Xeon regression fix (related to
     the --debug command line option), Skylake adjustment for the TSC
     running at a frequency that doesn't match the base one exactly, and
     a Knights Landing quirk to account for the fact that it only
     updates APERF and MPERF every 1024 clock cycles plus bumping up the
     turbostat version number (Len Brown, Hubert Chrzaniuk)"

* tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power turbosat: update version number
  tools/power turbostat: SKL: Adjust for TSC difference from base frequency
  tools/power turbostat: KNL workaround for %Busy and Avg_MHz
  tools/power turbostat: IVB Xeon: fix --debug regression
  ACPI / PCI: Remove duplicated penalty on SCI IRQ
  ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
  ACPI / EC: Fix a memory leak issue in acpi_ec_query()
  PM / OPP: Fix typo modifcation -> modification
  PCI / PM: Update runtime PM documentation for PCI devices
  PM / OPP: of_property_count_u32_elems() can return errors
  intel_idle: Skylake Client Support - updated

Pull networking fixes from David Miller:

1) Fix regression in SKB partial checksum handling, from Pravin B
   Shalar.

2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse
   Brandeburg.

3) Cure softlockups during accept() in SCTP, from Karl Heiss.

4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from
   Aaron Conole.

5) IPV6 erroneously ignores output interface specifier in lookup key for
   route lookups, fix from David Ahern.

6) In Marvell DSA driver, forward unknown frames to CPU port, from
   Andrew Lunn.

7) Mission flow flag initializations in some code paths, from David
   Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Initialize flow flags in input path
  net: dsa: fix preparation of a port STP update
  testptp: Silence compiler warnings on ppc64
  net/mlx4: Handle return codes in mlx4_qp_attach_common
  dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port
  skbuff: Fix skb checksum partial check.
  net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set
  net sysfs: Print link speed as signed integer
  bna: fix error handling
  af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag
  af_unix: Convert the unix_sk macro to an inline function for type safety
  net: sctp: Don't use 64 kilobyte lookup table for four elements
  l2tp: protect tunnel->del_work by ref_count
  net/ibm/emac: bump version numbers for correct work with ethtool
  sctp: Prevent soft lockup when sctp_accept() is called during a timeout event
  sctp: Whitespace fix
  i40e/i40evf: check for stopped admin queue
  i40e: fix VLAN inside VXLAN
  r8169: fix handling rtl_readphy result
  net: hisilicon: fix handling platform_get_irq result

Pull KVM fixes from Paolo Bonzini:
 "(Relatively) a lot of reverts, mostly.

  Bugs have trickled in for a new feature in 4.2 (MTRR support in
  guests) so I'm reverting it all; let's not make this -rc period busier
  for KVM than it's been so far.  This covers the four reverts from me.

  The fifth patch is being reverted because Radim found a bug in the
  implementation of stable scheduler clock, *but* also managed to
  implement the feature entirely without hypervisor support.  So instead
  of fixing the hypervisor side we can remove it completely; 4.4 will
  get the new implementation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  Use WARN_ON_ONCE for missing X86_FEATURE_NRIPS
  Update KVM homepage Url
  Revert "KVM: SVM: use NPT page attributes"
  Revert "KVM: svm: handle KVM_X86_QUIRK_CD_NW_CLEARED in svm_get_mt_mask"
  Revert "KVM: SVM: Sync g_pat with guest-written PAT value"
  Revert "KVM: x86: apply guest MTRR virtualization on host reserved pages"
  Revert "KVM: x86: zero kvmclock_offset when vcpu0 initializes kvmclock system MSR"

Pull rdma fixes from Doug Ledford:
 - Fixes for mlx5 related issues
 - Fixes for ipoib multicast handling

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/ipoib: increase the max mcast backlog queue
  IB/ipoib: Make sendonly multicast joins create the mcast group
  IB/ipoib: Expire sendonly multicast joins
  IB/mlx5: Remove pa_lkey usages
  IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEY
  IB/iser: Add module parameter for always register memory
  xprtrdma: Replace global lkey with lkey local to PD

* pm-cpuidle:
  intel_idle: Skylake Client Support - updated

* pm-opp:
  PM / OPP: Fix typo modifcation -> modification
  PM / OPP: of_property_count_u32_elems() can return errors

* pm-tools:
  tools/power turbosat: update version number
  tools/power turbostat: SKL: Adjust for TSC difference from base frequency
  tools/power turbostat: KNL workaround for %Busy and Avg_MHz
  tools/power turbostat: IVB Xeon: fix --debug regression

* acpi-ec:
  ACPI / EC: Fix a memory leak issue in acpi_ec_query()

* pm-pci:
  PCI / PM: Update runtime PM documentation for PCI devices

* acpi-pci:
  ACPI / PCI: Remove duplicated penalty on SCI IRQ
  ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ

The cpu feature flags are not ever going to change, so warning
everytime can cause a lot of kernel log spam
(in our case more than 10GB/hour).

The warning seems to only occur when nested virtualization is
enabled, so it's probably triggered by a KVM bug.  This is a
sensible and safe change anyway, and the KVM bug fix might not
be suitable for stable releases anyway.

Cc: stable@vger.kernel.org
Signed-off-by: NDirk Mueller <dmueller@suse.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The old one appears to be a generic catch all page, which
is unhelpful.
Signed-off-by: NDirk Mueller <dmueller@suse.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull UBI/UBIFS fixes from Richard Weinberger:
 "This contains three bug fixes for both UBI and UBIFS"

* tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs:
  UBI: return ENOSPC if no enough space available
  UBI: Validate data_size
  UBIFS: Kill unneeded locking in ubifs_init_security

Pull key signing fixes from James Morris:
 "Keyrings and modsign fixes from David Howells"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MODSIGN: Change from CMS to PKCS#7 signing if the openssl is too old
  X.509: Don't strip leading 00's from key ID when constructing key description
  KEYS: Remove unnecessary header #inclusions from extract-cert.c
  KEYS: Fix race between key destruction and finding a keyring by name

This reverts commit 3c2e7f7d.
Initializing the mapping from MTRR to PAT values was reported to
fail nondeterministically, and it also caused extremely slow boot
(due to caching getting disabled---bug 103321) with assigned devices.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: NSebastian Schuette <dracon@ewetel.net>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit 54928303.
It builds on the commit that is being reverted next.

Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit e098223b,
which has a dependency on other commits being reverted.

Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit fd717f11.
It was reported to cause Machine Check Exceptions (bug 104091).

Reported-by: harn-solo@gmx.de
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull watchdog fixes from Wim Van Sebroeck:
 "This fixes:

   - module autoload for 3 OF platform drivers
   - poweroff behaviour on bcm2835 watchdog device
   - I2C dependencies for iTCO_wdt.c"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: iTCO: Fix dependencies on I2C
  watchdog: bcm2835: Fix poweroff behaviour
  watchdog: Fix module autoload for OF platform driver

Merge tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmin fixes from Guenter Roeck:
 "Fix module autoload for various drivers"

* tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pwm-fan) Fix module autoload for OF platform driver
  hwmon: (gpio-fan) Fix module autoload for OF platform driver
  hwmon: (abx500) Fix module autoload for OF platform driver

Pull RCU fixes from Ingo Molnar:
 "Two RCU fixes:

   - work around bug with recent GCC versions.

   - fix false positive lockdep splat"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Suppress lockdep false positive for rcp->exp_funnel_mutex
  rcu: Change _wait_rcu_gp() to work around GCC bug 67055

As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
having initialized the IPC object state.  Yes, we initialize the IPC
object in a locked state, but with all the lockless RCU lookup work,
that IPC object lock no longer means that the state cannot be seen.

We already did this for the IPC semaphore code (see commit e8577d1f:
"ipc/sem.c: fully initialize sem_array before making it visible") but we
clearly forgot about msg and shm.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fib_table_lookup tracepoint found 2 places where the flowi4_flags is
not initialized.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of the default 0 value of ret in dsa_slave_port_attr_set, a
driver may return -EOPNOTSUPP from the commit phase of a STP state,
which triggers a WARN() from switchdev.

This happened on a 6185 switch which does not support hardware bridging.

Fixes: 35636062 ("switchdev: convert STP update to switchdev attr set")
Reported-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When compiling Documentation/ptp/testptp.c the following compiler
warnings are printed out:

Documentation/ptp/testptp.c: In function ‘main’:
Documentation/ptp/testptp.c:367:11: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 3 has type ‘__s64’ [-Wformat=]
           event.t.sec, event.t.nsec);
           ^
Documentation/ptp/testptp.c:505:5: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
     (pct+2*i)->sec, (pct+2*i)->nsec);
     ^
Documentation/ptp/testptp.c:507:5: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
     (pct+2*i+1)->sec, (pct+2*i+1)->nsec);
     ^
Documentation/ptp/testptp.c:509:5: warning: format ‘%lld’ expects argument
    of type ‘long long int’, but argument 2 has type ‘__s64’ [-Wformat=]
     (pct+2*i+2)->sec, (pct+2*i+2)->nsec);

This happens because __s64 is by default defined as "long" on ppc64,
not as "long long". However, to fix these warnings, it's possible to
define the __SANE_USERSPACE_TYPES__ so that __s64 gets defined to
"long long" on ppc64, too.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both new_steering_entry() and existing_steering_entry() return values
based on their success or failure, but currently they fall through
silently.  This can make troubleshooting difficult, as we were unable
to tell which one of these two functions returned errors or
specifically what code was returned.  This patch remedies that
situation by passing the return codes to err, which is returned by
mlx4_qp_attach_common() itself.

This also addresses a leak in the call to mlx4_bitmap_free() as well.
Signed-off-by: NRobb Manes <rmanes@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Frames destined to an unknown address must be forwarded to the CPU
port. Otherwise incoming ARP, dhcp leases, etc, do not work.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Earlier patch 6ae459bd tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.

Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.

Fixes: 6ae459bd ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: NAndrew Vagin <avagin@odin.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wolfgang reported that IPv6 stack is ignoring oif in output route lookups:

    With ipv6, ip -6 route get always returns the specific route.

    $ ip -6 r
    2001:db8:e2::1 dev enp2s0  proto kernel  metric 256
    2001:db8:e2::/64 dev enp2s0  metric 1024
    2001:db8:e3::1 dev enp3s0  proto kernel  metric 256
    2001:db8:e3::/64 dev enp3s0  metric 1024
    fe80::/64 dev enp3s0  proto kernel  metric 256
    default via 2001:db8:e3::255 dev enp3s0  metric 1024

    $ ip -6 r get 2001:db8:e2::100
    2001:db8:e2::100 from :: dev enp2s0  src 2001:db8:e3::1  metric 0
        cache

    $ ip -6 r get 2001:db8:e2::100 oif enp3s0
    2001:db8:e2::100 from :: dev enp2s0  src 2001:db8:e3::1  metric 0
        cache

The stack does consider the oif but a mismatch in rt6_device_match is not
considered fatal because RT6_LOOKUP_F_IFACE is not set in the flags.

Cc: Wolfgang Nothdurft <netdev@linux-dude.de>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise 4294967295 (MBit/s) (-1) will be printed when there is no link.
Documentation/ABI/testing/sysfs-class-net does not state if this shall be
signed or unsigned.
Also remove the now unused variable fmt_udec.
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several functions can return negative value in case of error,
so their return type should be fixed as well as type of variables
to which this value is assigned.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Conole says:

====================
af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag

This patch set implements a bugfix for kernel.org bugzilla #12323, allowing
MSG_PEEK to return all queued data on the unix domain socket, not just the
data contained in a single SKB.

This is the v3 version of this patch, which includes a suggested modification
by Eric Dumazet to convert the unix_sk() conversion macro to a static inline
function. These patches are independent and can be applied separately.

This set was tested over a 24-hour period, utilizing a loop continually
executing the bugzilla issue attached python code. It was instrumented with
a pr_err_once() ([   13.798683] unix: went there at least one time).

v2->v3:
 - Added Eric Dumazet's suggestion for #define to static inline
 - Fixed an issue calling unix_state_lock() with an invalid argument

v3->v4:
 - Eliminated an XXX comment
 - Changed from goto unlock to explicit unix_state_unlock() and break
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag
is set.

This is referenced in kernel bugzilla #12323 @
https://bugzilla.kernel.org/show_bug.cgi?id=12323

As described both in the BZ and lkml thread @
http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an
AF_UNIX socket only reads a single skb, where the desired effect is
to return as much skb data has been queued, until hitting the recv
buffer size (whichever comes first).

The modified MSG_PEEK path will now move to the next skb in the tree
and jump to the again: label, rather than following the natural loop
structure. This requires duplicating some of the loop head actions.

This was tested using the python socketpair python code attached to
the bugzilla issue.
Signed-off-by: NAaron Conole <aconole@bytheb.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by Eric Dumazet this change replaces the
#define with a static inline function to enjoy
complaints by the compiler when misusing the API.
Signed-off-by: NAaron Conole <aconole@bytheb.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI error: init_volumes: not enough PEBs, required 706, available 686
UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1)
UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM
UBI error: ubi_init: cannot attach mtd1

If available PEBs are not enough when initializing volumes, return -ENOSPC
directly. If available PEBs are not enough when initializing WL, return
-ENOSPC instead of -ENOMEM.

Cc: stable@vger.kernel.org
Signed-off-by: NSheng Yong <shengyong1@huawei.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NDavid Gstir <david@sigma-star.at>

Make sure that data_size is less than LEB size.
Otherwise a handcrafted UBI image is able to trigger
an out of bounds memory access in ubi_compare_lebs().

Cc: stable@vger.kernel.org
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NDavid Gstir <david@sigma-star.at>

Fixes the following lockdep splat:
[    1.244527] =============================================
[    1.245193] [ INFO: possible recursive locking detected ]
[    1.245193] 4.2.0-rc1+ #37 Not tainted
[    1.245193] ---------------------------------------------
[    1.245193] cp/742 is trying to acquire lock:
[    1.245193]  (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0
[    1.245193]
[    1.245193] but task is already holding lock:
[    1.245193]  (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280
[    1.245193]
[    1.245193] other info that might help us debug this:
[    1.245193]  Possible unsafe locking scenario:
[    1.245193]
[    1.245193]        CPU0
[    1.245193]        ----
[    1.245193]   lock(&sb->s_type->i_mutex_key#9);
[    1.245193]   lock(&sb->s_type->i_mutex_key#9);
[    1.245193]
[    1.245193]  *** DEADLOCK ***
[    1.245193]
[    1.245193]  May be due to missing lock nesting notation
[    1.245193]
[    1.245193] 2 locks held by cp/742:
[    1.245193]  #0:  (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50
[    1.245193]  #1:  (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280
[    1.245193]
[    1.245193] stack backtrace:
[    1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37
[    1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014
[    1.245193]  ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5
[    1.245193]  ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68
[    1.245193]  000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500
[    1.245193] Call Trace:
[    1.245193]  [<ffffffff814f6f49>] dump_stack+0x4c/0x65
[    1.245193]  [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510
[    1.245193]  [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0
[    1.245193]  [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80
[    1.245193]  [<ffffffff810a1a93>] lock_acquire+0xd3/0x270
[    1.245193]  [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0
[    1.245193]  [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0
[    1.245193]  [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280
[    1.245193]  [<ffffffff81195d15>] vfs_create+0x95/0xc0
[    1.245193]  [<ffffffff8119929c>] path_openat+0x7cc/0x1280
[    1.245193]  [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0
[    1.245193]  [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0
[    1.245193]  [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90
[    1.245193]  [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0
[    1.245193]  [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180
[    1.245193]  [<ffffffff8119ac55>] do_filp_open+0x75/0xd0
[    1.245193]  [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40
[    1.245193]  [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180
[    1.245193]  [<ffffffff81189bd9>] do_sys_open+0x129/0x200
[    1.245193]  [<ffffffff81189cc9>] SyS_open+0x19/0x20
[    1.245193]  [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f

While the lockdep splat is a false positive, becuase path_openat holds i_mutex
of the parent directory and ubifs_init_security() tries to acquire i_mutex
of a new inode, it reveals that taking i_mutex in ubifs_init_security() is
in vain because it is only being called in the inode allocation path
and therefore nobody else can see the inode yet.

Cc: stable@vger.kernel.org # 3.20-
Reported-and-tested-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-and-tested-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: dedekind1@gmail.com

Merge tag 'keys-fixes-20150925' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus

Keyrings fixes from David Howells, for current Linus.

Seemingly innocuous sctp_trans_state_to_prio_map[] array
is way bigger than it looks, since
"[SCTP_UNKNOWN] = 2" expands into "[0xffff] = 2" !

This patch replaces it with switch() statement.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: linux-sctp@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a small chance that tunnel_free() is called before tunnel->del_work scheduled
resulting in a zero pointer dereference.
Signed-off-by: NAlexander Couzens <lynxis@fe80.eu>
Acked-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The size of the MAC register dump used to be the size specified by the
reg property in the device tree.  Userland has no good way of finding
out that size, and it was not specified consistently for each MAC type,
so ethtool would end up printing junk at the end of the register dump
if the device tree didn't match the size it assumed.

Using the new version numbers indicates unambiguously that the size of
the MAC register dump is dependent only on the MAC type.

Fixes: 5369c71f ("net/ibm/emac: fix size of emac dump memory areas")
Signed-off-by: NIvan Mikhaylov <ivan@ru.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Karl Heiss says:

====================
sctp: Fix SCTP deadlock

These patches fix a deadlock during accept() of an SCTP connection.

The first patch fixes whitespace issues.

The second patch actually fixes the deadlock race.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A case can occur when sctp_accept() is called by the user during
a heartbeat timeout event after the 4-way handshake.  Since
sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the
bh_sock_lock in sctp_generate_heartbeat_event() will be taken with
the listening socket but released with the new association socket.
The result is a deadlock on any future attempts to take the listening
socket lock.

Note that this race can occur with other SCTP timeouts that take
the bh_lock_sock() in the event sctp_accept() is called.

 BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0]
 ...
 RIP: 0010:[<ffffffff8152d48e>]  [<ffffffff8152d48e>] _spin_lock+0x1e/0x30
 RSP: 0018:ffff880028323b20  EFLAGS: 00000206
 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48
 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0
 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225
 FS:  0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
 CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0)
 Stack:
 ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000
 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00
 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8
 Call Trace:
 <IRQ>
 [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp]
 [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0
 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0
 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440
 [<ffffffff81497255>] ? ip_rcv+0x275/0x350
 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750
 ...

With lockdep debugging:

 =====================================
 [ BUG: bad unlock balance detected! ]
 -------------------------------------
 CslRx/12087 is trying to release lock (slock-AF_INET) at:
 [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp]
 but there are no more locks to release!

 other info that might help us debug this:
 2 locks held by CslRx/12087:
 #0:  (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0
 #1:  (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp]

Ensure the socket taken is also the same one that is released by
saving a copy of the socket before entering the timeout event
critical section.
Signed-off-by: NKarl Heiss <kheiss@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>