Now that there's a HCI request API available where the callback receives
the resulting skb, we can convert the local OOB data reading to use this
new API. This patch does the necessary update in mgmt.c (which also
requires moving the callback higher up since it's now a static function)
and removes the custom calls from hci_event.c that are no-longer
necessary.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

To make the hci_req_run_skb() API consistent with hci_cmd_sync_ev()
the callback should receive the cmd_complete parameters in the 'normal'
case and the full HCI event if a special event was expected. This patch
moves the hci_get_cmd_complete() function from hci_core.c to hci_event.c
where it's used to strip the skb from the needed headers before passing
it on to the callback.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The hci_req_pending() function has no users anymore, so simply remove
it.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now that the synchronous HCI requests use the new API and a new private
variable the recv_evt member of hci_dev is no-longer needed. This patch
removes it.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now that there's an API in place that allows passing the resulting skb
to the request callback we can conveniently convert the hci_req_sync and
related functions to use it. Since we still need to get the skb from the
async callback into the sleeping _sync() function the patch adds another
req_skb variable to hci_dev where the sync request state is tracked.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a second possible callback for HCI requests where the
callback will receive the full skb of the last successfully completed
HCI command. This API is useful for cases where we want to use a request
to read some data and the existing hci_event.c handlers do not store it
e.g. in the hci_dev struct.

The reason the patch is a bit bigger than just adding the new API is
because the hci_req_cmd_complete() functions required some refactoring
to enable it: now hci_req_cmd_complete() is simply used to request the
callback pointers if any, and the actual calling of them happens from a
single place at the end of hci_event_packet(). The reason for this is
that we need to pass the original skb (without any skb_pull, etc
modifications done to it) and it's simplest to keep track of it within
the hci_event_packet() function.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When dealing with HCI command status events, the reasoning for trying to
mark a request as complete if no specific event is being waited for and
status was success is not self-evident. This patch adds a clarifying
comment above the if-statement.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When SMP selftest is enabled, then besides printing the result into the
kernel message buffer, also create a debugfs file that allows retrieving
the same information.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

When ECDH selftest is enabled, then besides printing the result into the
kernel message buffer, also create a debugfs file that allows retrieving
the same information.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The BNEP flags should be clearly restricted to valid ones. So this puts
extra checks in place to ensure this.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The HIDP flags should be clearly restricted to valid ones. So this puts
extra checks in place to ensure this.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The CMTP flags should be clearly restricted to valid ones. So this puts
extra checks in place to ensure this.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

For debugging purposes it is good to be able to read the current
configured Device ID details.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

In order to shrink the size of bt_skb_cb, this patch moves the HCI
request related variables into their own req_ctrl struct. Additionall
the L2CAP and HCI request structs are placed inside the same union since
they will never be used at the same time for the same skb.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We're getting very close to the maximum possible size of bt_skb_cb. To
prepare to shrink the struct with the help of a union this patch moves
all L2CAP related variables into the l2cap_ctrl struct. To later add
other 'ctrl' structs the L2CAP one is renamed simple 'l2cap' instead
of 'control'.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The Read Local OOB Extended Data commands are required to return the
address type and the data length at least. However currently the error
returns only the address type.

To fix this and avoid any extra allocations or stack memory, rearrange
the code so that the same path can be used for error returns.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Taking the hci_dev lock for just a memory allocation seems a bit too
much and not really needed. So instead try to allocate the memory first
and then take the lock.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch fixes a bug where the advertising parameters weren't updated
after a call to "Set Connectable" if the HCI_ADVERTISING_INSTANCE
setting was set.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With this patch, ADV_SCAN_IND will be used for advertising instances
that have non-zero scan response data while the global "connectable"
setting is "off".
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch fixes a bug where ADV_NONCONN_IND was being used for
advertising instances >0 while the global connectable setting was
set to "on".
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

During the HCI init phase a completed request might be the last part of
the setup procedure after which the actual init procedure starts. The
init procedure begins with a call to hci_reset_req() which sets the
HCI_RESET flag. The purpose of this flag is to make us ignore any
updates to ncmd/cmd_cnt as long as we haven't received the command
complete event for the HCI_Reset. There's a potential race with this
however:

	hci_req_cmd_complete(hdev, opcode, status);

	if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) {
		atomic_set(&hdev->cmd_cnt, 1);
		if (!skb_queue_empty(&hdev->cmd_q))
			queue_work(hdev->workqueue, &hdev->cmd_work);
	}

Since the hci_req_cmd_complete() will trigger the completion of the
setup stage, it's possible that hci_reset_req() gets called before we
try to read ev->ncmd and the HCI_RESET flag. Because of this the cmd_cnt
would never be updated and the hci_reset_req() in practice ends up
blocking itself.

This patch fixes the issue by updating cmd_cnt before notifying the
request completion, and then reading it again to determine whether the
cmd_work should be queued or not.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

For all modern Bluetooth USB devices from Broadcom it makes a lot more
sense to use USB_VENDOR_AND_INTERFACE_INFO instead of manually adding
USB_DEVICE for each one of them. There are already interface entries
for these vendors and so just remove the duplicate device entries.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch fix the error handling when is_tx is true. The error handling
tries to get the transceiver into RX_AACK_ON mode then we need to be
sure that is_tx is false.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This spinlock isn't necessary because if we are in TX_ON/TX_ARET_ON
state the transceiver can't be interrupted e.g. by receiving a frame
when a SHR was detected. In this time the transceiver doesn't leave
the TX_ON/TX_ARET_ON state until the tx complete irq change the state
into RX_AACK_ON again. This means a receiving interrupt in state
TX_ON/TX_ARET_ON can't happen and is_tx is protected by transceiver.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch cleanups the checking of different mac phy depended values by
handling depended mac settings per hw support flag in one condition.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch simplifies the code paths for assembling the advertising data
used by advertising instances 0 and 1.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch updates the "supported_flags" parameter returned from the
"Read Advertising Features" command. Add Advertising will now return
an error if an unsupported flag is provided.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for the "tx-power" flag of the Add
Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for the "managed-flags" flag of the Add
Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for the "limited-discoverable" flag of the
Add Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for the "discoverable" flag of the
Add Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for the "connectable mode" flag of the
Add Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds macro definitions for possible advertising instance
flags that can be passed to the "Add Advertising" command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Some Bluetooth controllers require initialization before being
used (vendor config, firmware download). Add possibility for a
HCI UART proto to implement this early init via the setup callback.
Signed-off-by: NLoic Poulain <loic.poulain@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When the user of the management interface is not trusted, then it only
has access to a limited set of commands and events. When providing the
list of supported commands and events take the trusted vs untrusted
status of the user into account and return different lists.

This way the untrusted user knows exactly which commands it can
execute and which events it can receive. So no guesswork needed.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch implements support for the timeout parameter of the
Add Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch implements setting the Scan Response data provided as part
of an advertising instance through the Add Advertising command.
Signed-off-by: NArman Uguray <armansito@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>