Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 2 年 前同步成功

通知 173
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 25 7月, 2016 4 次提交
  3. 23 7月, 2016 2 次提交
    • A
      radix-tree: fix radix_tree_iter_retry() for tagged iterators. · 3cb9185c
      由 Andrey Ryabinin 提交于 
      radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags.
Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot()
leading to crash:

  RIP: radix_tree_next_slot include/linux/radix-tree.h:473
    find_get_pages_tag+0x334/0x930 mm/filemap.c:1452
  ....
  Call Trace:
    pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960
    mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516
    ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736
    do_writepages+0x97/0x100 mm/page-writeback.c:2364
    __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300
    filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490
    ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115
    vfs_fsync_range+0x10a/0x250 fs/sync.c:195
    vfs_fsync fs/sync.c:209
    do_fsync+0x42/0x70 fs/sync.c:219
    SYSC_fdatasync fs/sync.c:232
    SyS_fdatasync+0x19/0x20 fs/sync.c:230
    entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207

We must reset iterator's tags to bail out from radix_tree_next_slot()
and go to the slow-path in radix_tree_next_chunk().

Fixes: 46437f9a ("radix-tree: fix race in gang lookup")
Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3cb9185c
    • J
      mm: memcontrol: fix cgroup creation failure after many small jobs · 73f576c0
      由 Johannes Weiner 提交于 
      The memory controller has quite a bit of state that usually outlives the
cgroup and pins its CSS until said state disappears.  At the same time
it imposes a 16-bit limit on the CSS ID space to economically store IDs
in the wild.  Consequently, when we use cgroups to contain frequent but
small and short-lived jobs that leave behind some page cache, we quickly
run into the 64k limitations of outstanding CSSs.  Creating a new cgroup
fails with -ENOSPC while there are only a few, or even no user-visible
cgroups in existence.

Although pinning CSSs past cgroup removal is common, there are only two
instances that actually need an ID after a cgroup is deleted: cache
shadow entries and swapout records.

Cache shadow entries reference the ID weakly and can deal with the CSS
having disappeared when it's looked up later.  They pose no hurdle.

Swap-out records do need to pin the css to hierarchically attribute
swapins after the cgroup has been deleted; though the only pages that
remain swapped out after offlining are tmpfs/shmem pages.  And those
references are under the user's control, so they are manageable.

This patch introduces a private 16-bit memcg ID and switches swap and
cache shadow entries over to using that.  This ID can then be recycled
after offlining when the CSS remains pinned only by objects that don't
specifically need it.

This script demonstrates the problem by faulting one cache page in a new
cgroup and deleting it again:

  set -e
  mkdir -p pages
  for x in `seq 128000`; do
    [ $((x % 1000)) -eq 0 ] && echo $x
    mkdir /cgroup/foo
    echo $$ >/cgroup/foo/cgroup.procs
    echo trex >pages/$x
    echo $$ >/cgroup/cgroup.procs
    rmdir /cgroup/foo
  done

When run on an unpatched kernel, we eventually run out of possible IDs
even though there are no visible cgroups:

  [root@ham ~]# ./cssidstress.sh
  [...]
  65000
  mkdir: cannot create directory '/cgroup/foo': No space left on device

After this patch, the IDs get released upon cgroup destruction and the
cache and css objects get released once memory reclaim kicks in.

[hannes@cmpxchg.org: init the IDR]
  Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org
Fixes: b2052564 ("mm: memcontrol: continue cache reclaim from offlined groups")
Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NJohn Garcia <john.garcia@mesosphere.io>
Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Nikolay Borisov <kernel@kyup.com>
Cc: <stable@vger.kernel.org>	[3.19+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      73f576c0
  5. 17 7月, 2016 1 次提交
    • P
      vlan: use a valid default mtu value for vlan over macsec · 18d3df3e
      由 Paolo Abeni 提交于 
      macsec can't cope with mtu frames which need vlan tag insertion, and
vlan device set the default mtu equal to the underlying dev's one.
By default vlan over macsec devices use invalid mtu, dropping
all the large packets.
This patch adds a netif helper to check if an upper vlan device
needs mtu reduction. The helper is used during vlan devices
initialization to set a valid default and during mtu updating to
forbid invalid, too bit, mtu values.
The helper currently only check if the lower dev is a macsec device,
if we get more users, we need to update only the helper (possibly
reserving an additional IFF bit).
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      18d3df3e
  7. 15 7月, 2016 2 次提交
    • H
      mm: thp: refix false positive BUG in page_move_anon_rmap() · 5a49973d
      由 Hugh Dickins 提交于 
      The VM_BUG_ON_PAGE in page_move_anon_rmap() is more trouble than it's
worth: the syzkaller fuzzer hit it again.  It's still wrong for some THP
cases, because linear_page_index() was never intended to apply to
addresses before the start of a vma.

That's easily fixed with a signed long cast inside linear_page_index();
and Dmitry has tested such a patch, to verify the false positive.  But
why extend linear_page_index() just for this case? when the avoidance in
page_move_anon_rmap() has already grown ugly, and there's no reason for
the check at all (nothing else there is using address or index).

Remove address arg from page_move_anon_rmap(), remove VM_BUG_ON_PAGE,
remove CONFIG_DEBUG_VM PageTransHuge adjustment.

And one more thing: should the compound_head(page) be done inside or
outside page_move_anon_rmap()? It's usually pushed down to the lowest
level nowadays (and mm/memory.c shows no other explicit use of it), so I
think it's better done in page_move_anon_rmap() than by caller.

Fixes: 0798d3c0 ("mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap()")
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1607120444540.12528@eggly.anvilsSigned-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5a49973d
    • N
      mm: thp: move pmd check inside ptl for freeze_page() · 33f4751e
      由 Naoya Horiguchi 提交于 
      I found a race condition triggering VM_BUG_ON() in freeze_page(), when
running a testcase with 3 processes:
  - process 1: keep writing thp,
  - process 2: keep clearing soft-dirty bits from virtual address of process 1
  - process 3: call migratepages for process 1,

The kernel message is like this:

  kernel BUG at /src/linux-dev/mm/huge_memory.c:3096!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: cfg80211 rfkill crc32c_intel ppdev serio_raw pcspkr virtio_balloon virtio_console parport_pc parport pvpanic acpi_cpufreq tpm_tis tpm i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy virtio_pci virtio_ring virtio
  CPU: 0 PID: 28863 Comm: migratepages Not tainted 4.6.0-v4.6-160602-0827-+ #2
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  task: ffff880037320000 ti: ffff88007cdd0000 task.ti: ffff88007cdd0000
  RIP: 0010:[<ffffffff811f8e06>]  [<ffffffff811f8e06>] split_huge_page_to_list+0x496/0x590
  RSP: 0018:ffff88007cdd3b70  EFLAGS: 00010202
  RAX: 0000000000000001 RBX: ffff88007c7b88c0 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000700000200 RDI: ffffea0003188000
  RBP: ffff88007cdd3bb8 R08: 0000000000000001 R09: 00003ffffffff000
  R10: ffff880000000000 R11: ffffc000001fffff R12: ffffea0003188000
  R13: ffffea0003188000 R14: 0000000000000000 R15: 0400000000000080
  FS:  00007f8ec241d740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000             CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8ec1f3ed20 CR3: 000000003707b000 CR4: 00000000000006f0
  Call Trace:
    ? list_del+0xd/0x30
    queue_pages_pte_range+0x4d1/0x590
    __walk_page_range+0x204/0x4e0
    walk_page_range+0x71/0xf0
    queue_pages_range+0x75/0x90
    ? queue_pages_hugetlb+0x190/0x190
    ? new_node_page+0xc0/0xc0
    ? change_prot_numa+0x40/0x40
    migrate_to_node+0x71/0xd0
    do_migrate_pages+0x1c3/0x210
    SyS_migrate_pages+0x261/0x290
    entry_SYSCALL_64_fastpath+0x1a/0xa4
  Code: e8 b0 87 fb ff 0f 0b 48 c7 c6 30 32 9f 81 e8 a2 87 fb ff 0f 0b 48 c7 c6 b8 46 9f 81 e8 94 87 fb ff 0f 0b 85 c0 0f 84 3e fd ff ff <0f> 0b 85 c0 0f 85 a6 00 00 00 48 8b 75 c0 4c 89 f7 41 be f0 ff
  RIP   split_huge_page_to_list+0x496/0x590

I'm not sure of the full scenario of the reproduction, but my debug
showed that split_huge_pmd_address(freeze=true) returned without running
main code of pmd splitting because pmd_present(*pmd) in precheck somehow
returned 0.  If this happens, the subsequent try_to_unmap() fails and
returns non-zero (because page_mapcount() still > 0), and finally
VM_BUG_ON() fires.  This patch tries to fix it by prechecking pmd state
inside ptl.

Link: http://lkml.kernel.org/r/1466990929-7452-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      33f4751e
  9. 14 7月, 2016 1 次提交
    • W
      rose: limit sk_filter trim to payload · f4979fce
      由 Willem de Bruijn 提交于 
      Sockets can have a filter program attached that drops or trims
incoming packets based on the filter program return value.

Rose requires data packets to have at least ROSE_MIN_LEN bytes. It
verifies this on arrival in rose_route_frame and unconditionally pulls
the bytes in rose_recvmsg. The filter can trim packets to below this
value in-between, causing pull to fail, leaving the partial header at
the time of skb_copy_datagram_msg.

Place a lower bound on the size to which sk_filter may trim packets
by introducing sk_filter_trim_cap and call this for rose packets.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f4979fce
  11. 12 7月, 2016 1 次提交
  13. 11 7月, 2016 1 次提交
    • L
      x86/quirks: Add early quirk to reset Apple AirPort card · abb2bafd
      由 Lukas Wunner 提交于 
      The EFI firmware on Macs contains a full-fledged network stack for
downloading OS X images from osrecovery.apple.com. Unfortunately
on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
wireless card on every boot and leaves it enabled even after
ExitBootServices has been called. The card continues to assert its IRQ
line, causing spurious interrupts if the IRQ is shared. It also corrupts
memory by DMAing received packets, allowing for remote code execution
over the air. This only stops when a driver is loaded for the wireless
card, which may be never if the driver is not installed or blacklisted.

The issue seems to be constrained to the Broadcom 4331. Chris Milsted
has verified that the newer Broadcom 4360 built into the MacBookPro11,3
(2013/2014) does not exhibit this behaviour. The chances that Apple will
ever supply a firmware fix for the older machines appear to be zero.

The solution is to reset the card on boot by writing to a reset bit in
its mmio space. This must be done as an early quirk and not as a plain
vanilla PCI quirk to successfully combat memory corruption by DMAed
packets: Matthew Garrett found out in 2012 that the packets are written
to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
This type of memory is made available to the page allocator by
efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
subsys initcall level. In-between a time window would be open for memory
corruption. Random crashes occurring in this time window and attributed
to DMAed packets have indeed been observed in the wild by Chris
Bainbridge.

When Matthew Garrett analyzed the memory corruption issue in 2012, he
sought to fix it with a grub quirk which transitions the card to D3hot:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56

This approach does not help users with other bootloaders and while it
may prevent DMAed packets, it does not cure the spurious interrupts
emanating from the card. Unfortunately the card's mmio space is
inaccessible in D3hot, so to reset it, we have to undo the effect of
Matthew's grub patch and transition the card back to D0.

Note that the quirk takes a few shortcuts to reduce the amount of code:
The size of BAR 0 and the location of the PM capability is identical
on all affected machines and therefore hardcoded. Only the address of
BAR 0 differs between models. Also, it is assumed that the BCMA core
currently mapped is the 802.11 core. The EFI driver seems to always take
care of this.

Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
towards finding the best solution to this problem.

The following should be a comprehensive list of affected models:
    iMac13,1        2012  21.5"       [Root Port 00:1c.3 = 8086:1e16]
    iMac13,2        2012  27"         [Root Port 00:1c.3 = 8086:1e16]
    Macmini5,1      2011  i5 2.3 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,2      2011  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,3      2011  i7 2.0 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini6,1      2012  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1e12]
    Macmini6,2      2012  i7 2.3 GHz  [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro8,1   2011  13"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,2   2011  15"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,3   2011  17"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro9,1   2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro9,2   2012  13"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,1  2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,2  2012  13"         [Root Port 00:1c.1 = 8086:1e12]

For posterity, spurious interrupts caused by the Broadcom 4331 wireless
card resulted in splats like this (stacktrace omitted):

    irq 17: nobody cared (try booting with the "irqpoll" option)
    handlers:
    [<ffffffff81374370>] pcie_isr
    [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci]
    [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec]
    Disabling IRQ #17

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732
Tested-by: Konstantin Simanov <k.simanov@stlk.ru>        # [MacBookPro8,1]
Tested-by: Lukas Wunner <lukas@wunner.de>                # [MacBookPro9,1]
Tested-by: Bryan Paradis <bryan.paradis@gmail.com>       # [MacBookPro9,2]
Tested-by: Andrew Worsley <amworsley@gmail.com>          # [MacBookPro10,1]
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Acked-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chris Milsted <cmilsted@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Michael Buesch <m@bues.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: b43-dev@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus
Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses
Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
[ Did minor readability edits. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      abb2bafd
  15. 02 7月, 2016 2 次提交
  17. 01 7月, 2016 1 次提交
  19. 30 6月, 2016 6 次提交
  21. 29 6月, 2016 2 次提交
  23. 28 6月, 2016 1 次提交
  25. 25 6月, 2016 5 次提交
  27. 24 6月, 2016 2 次提交
    • P
      locking/static_key: Fix concurrent static_key_slow_inc() · 4c5ea0a9
      由 Paolo Bonzini 提交于 
      The following scenario is possible:

    CPU 1                                   CPU 2
    static_key_slow_inc()
     atomic_inc_not_zero()
      -> key.enabled == 0, no increment
     jump_label_lock()
     atomic_inc_return()
      -> key.enabled == 1 now
                                            static_key_slow_inc()
                                             atomic_inc_not_zero()
                                              -> key.enabled == 1, inc to 2
                                             return
                                            ** static key is wrong!
     jump_label_update()
     jump_label_unlock()

Testing the static key at the point marked by (**) will follow the
wrong path for jumps that have not been patched yet.  This can
actually happen when creating many KVM virtual machines with userspace
LAPIC emulation; just run several copies of the following program:

    #include <fcntl.h>
    #include <unistd.h>
    #include <sys/ioctl.h>
    #include <linux/kvm.h>

    int main(void)
    {
        for (;;) {
            int kvmfd = open("/dev/kvm", O_RDONLY);
            int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
            close(ioctl(vmfd, KVM_CREATE_VCPU, 1));
            close(vmfd);
            close(kvmfd);
        }
        return 0;
    }

Every KVM_CREATE_VCPU ioctl will attempt a static_key_slow_inc() call.
The static key's purpose is to skip NULL pointer checks and indeed one
of the processes eventually dereferences NULL.

As explained in the commit that introduced the bug:

  706249c2 ("locking/static_keys: Rework update logic")

jump_label_update() needs key.enabled to be true.  The solution adopted
here is to temporarily make key.enabled == -1, and use go down the
slow path when key.enabled <= 0.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # v4.3+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 706249c2 ("locking/static_keys: Rework update logic")
Link: http://lkml.kernel.org/r/1466527937-69798-1-git-send-email-pbonzini@redhat.com
[ Small stylistic edits to the changelog and the code. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      4c5ea0a9
    • B
      pwm: Fix pwm_apply_args() · 33cdcee0
      由 Boris Brezillon 提交于 
      Commit 5ec803ed ("pwm: Add core infrastructure to allow atomic
updates"), implemented pwm_disable() as a wrapper around
pwm_apply_state(), and then, commit ef2bf499 ("pwm: Improve args
checking in pwm_apply_state()") added missing checks on the ->period
value in pwm_apply_state() to ensure we were not passing inappropriate
values to the ->config() or ->apply() methods.

The conjunction of these 2 commits led to a case where pwm_disable()
was no longer succeeding, thus preventing the polarity setting done
in pwm_apply_args().

Set a valid period in pwm_apply_args() to ensure polarity setting
won't be rejected.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: NBrian Norris <briannorris@chromium.org>
Fixes: 5ec803ed ("pwm: Add core infrastructure to allow atomic updates")
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
      33cdcee0
  29. 23 6月, 2016 2 次提交
  31. 20 6月, 2016 1 次提交
  33. 18 6月, 2016 2 次提交
  35. 16 6月, 2016 2 次提交
    • A
      bpf: fix matching of data/data_end in verifier · 19de99f7
      由 Alexei Starovoitov 提交于 
      The ctx structure passed into bpf programs is different depending on bpf
program type. The verifier incorrectly marked ctx->data and ctx->data_end
access based on ctx offset only. That caused loads in tracing programs
int bpf_prog(struct pt_regs *ctx) { .. ctx->ax .. }
to be incorrectly marked as PTR_TO_PACKET which later caused verifier
to reject the program that was actually valid in tracing context.
Fix this by doing program type specific matching of ctx offsets.

Fixes: 969bf05e ("bpf: direct packet access")
Reported-by: NSasha Goldshtein <goldshtn@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      19de99f7
    • J
      net: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG · daddef76
      由 Jason A. Donenfeld 提交于 
      The implementation of net_dbg_ratelimited in the CONFIG_DYNAMIC_DEBUG
case was added with 2c94b537 ("net: Implement net_dbg_ratelimited() for
CONFIG_DYNAMIC_DEBUG case"). The implementation strategy was to take the
usual definition of the dynamic_pr_debug macro, but alter it by adding a
call to "net_ratelimit()" in the if statement. This is, in fact, the
correct approach.

However, while doing this, the author of the commit forgot to surround
fmt by pr_fmt, resulting in unprefixed log messages appearing in the
console. So, this commit adds back the pr_fmt(fmt) invocation, making
net_dbg_ratelimited properly consistent across DEBUG, no DEBUG, and
DYNAMIC_DEBUG cases, and bringing parity with the behavior of
dynamic_pr_debug as well.

Fixes: 2c94b537 ("net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Cc: Tim Bingham <tbingham@akamai.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      daddef76
  37. 15 6月, 2016 2 次提交