The export should happen after the function, not at the bottom of the
file, so fix that up.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If sysfs_notify is called on a binary attribute, bad things can
happen, so prevent it.

Note, no in-kernel usage of this is currently present, but in the
future, it's good to be safe.

Changes in V2:
- Also ignore sysfs_notify on dirs, links
- Use WARN_ON rather than silently failing
- Compiled and tested (huge apologies about first submission)
Signed-off-by: NNick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 6ad58fa8 as %pSR
isn't in the tree yet.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new vsprintf extension to avoid any possible
message interleaving.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nothing outside of fs/sysfs/file.c references this function, so mark it static.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Recently an OOPS was observed from the usb serial io_ti driver when it tried to remove
sysfs directories.  Upon investigation it turns out this driver was always buggy
and that a recent sysfs change had stopped guarding itself against removing attributes
from sysfs directories that had already been removed. :(

Historically we have been silent about attempting to files from nonexistent sysfs
directories and have politely returned error codes.  That has resulted in people writing
broken code that ignores the error codes.

Issue a kernel WARNING and a stack backtrace to make it clear in no uncertain
terms that abusing sysfs is not ok, and the callers need to fix their code.

This change transforms the io_ti OOPS into a more comprehensible error message
and stack backtrace.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Reported-by: NWolfgang Frisch <wfpub@roembden.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

sysfs is a core piece of ifrastructure that many people use and
few people have all of the rules in their head on how to use
it correctly.  Add warnings for people using tagged directories
improperly to that any misuses can be caught and diagnosed quickly.

A single inexpensive test in sysfs_find_dirent is almost sufficient
to catch all possible misuses.  An additional warning is needed
in sysfs_add_dirent so that we actually fail when attempting to
add an untagged dirent in a tagged directory.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Looking up files in sysfs is hard to understand and analyize because we
currently allow placing untagged files in tagged directories.  In the
implementation of that we have two subtly different meanings of NULL.
NULL meaning there is no tag on a directory entry and NULL meaning
we don't care which namespace the lookup is performed for.  This
multiple uses of NULL have resulted in subtle bugs (since fixed)
in the code.

Currently it is only the bonding driver that needs to have an untagged
file in a tagged directory.

To untagle this mess I am adding support for tagged files to sysfs.
Modifying the bonding driver to implement bonding_masters as a tagged
file.  Registering bonding_masters once for each network namespace.
Then I am removing support for untagged entries in tagged sysfs
directories.

Resulting in code that is much easier to reason about.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some arches (x86, sh, arm, unicore, powerpc) the oops message would
print out the last sysfs file accessed.

This was very useful in finding a number of sysfs and driver core bugs
in the 2.5 and early 2.6 development days, but it has been a number of
years since this file has actually helped in debugging anything that
couldn't also be trivially determined from the stack traceback.

So it's time to delete the line.  This is good as we need all the space
we can get for oops messages at times on consoles.
Acked-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

d_path() returns an ERR_PTR and it doesn't return NULL.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs_chmod_file doesn't change the attribute it operates on, so this
attribute can be marked const.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The problem.  When implementing a network namespace I need to be able
to have multiple network devices with the same name.  Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.

What this patch does is to add an additional tag field to the
sysfs dirent structure.  For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible.  Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.

I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.

For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded.  Which means I need
a simple race free way to setup those directories as tagged.

To achieve a reace free design all tagged directories are created
and managed by sysfs itself.

Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid

- Implement mount_ns() which returns the ns of the calling process
  so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.

Everything else is left up to sysfs and the driver layer.

For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.

Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.

The work needed in sysfs is more extensive.  At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent.  Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.

Currently only directories which hold kobjects, and
symlinks are supported.  There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we exclude directories and symlinks from the set of sysfs
dirents where we need active references we are left with
sysfs attributes (binary or not).

- Tweak sysfs_deactivate to only do something on attributes
- Move lockdep initialization into sysfs_file_add_mode to
  limit it to just attributes.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It turns out that holding an active reference on a directory is
pointless.  The purpose of the active references are to allows us to
block when removing sysfs entries that have custom methods so we don't
remove modules while running modular code and to keep those custom
methods from accessing data structures after the files have been
removed.  Further sysfs_remove_dir remove all elements in the
directory before removing the directory itself, so there is no chance
we will remove a directory with active children.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing
Signed-off-by: NEmese Revfy <re.emese@gmail.com>
Acked-by: NDavid Teigland <teigland@redhat.com>
Acked-by: NMatt Domsch <Matt_Domsch@dell.com>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: NHans J. Koch <hjk@linutronix.de>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adding/Removing a whole array of attributes is very common. Add a standard
utility function to do this with a simple function call, instead of
requiring drivers to open code this.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that sysfs_getattr and sysfs_permission refresh the vfs
inode there is no need to immediatly push the mode change
into the vfs cache.  Reducing the amount of work needed and
simplifying the locking.
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently every caller of sysfs_chmod_file happens at either
file creation time to set a non-default mode or in response
to a specific user requested space change in policy.  Making
timestamps of when the chmod happens and notification of
a file changing mode uninteresting.

Remove the unnecessary time stamp and filesystem change
notification, and removes the last of the explicit inotify
and donitfy support from sysfs.
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs_notify_dirent is a simple atomic operation that can be used to
alert user-space that new data can be read from a sysfs attribute.

Unfortunately it cannot currently be called from non-process context
because of its use of spin_lock which is sometimes taken with
interrupts enabled.

So change all lockers of sysfs_open_dirent_lock to disable interrupts,
thus making sysfs_notify_dirent safe to be called from non-process
context (as drivers/md does in md_safemode_timeout).

sysfs_get_open_dirent is (documented as being) only called from
process context, so it uses spin_lock_irq.  Other places
use spin_lock_irqsave.

The usage for sysfs_notify_dirent in md_safemode_timeout was
introduced in 2.6.28, so this patch is suitable for that and more
recent kernels.
Reported-by: NJoel Andres Granados <jgranado@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't need a kernel thread per CPU for this application.
Acked-by: NAlex Chiang <achiang@hp.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, following test programs don't finished.

% ruby -e '
Thread.new { sleep }
File.read("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies")
'

strace expose the reason.

...
open("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY|O_LARGEFILE) = 3
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf9fa6b8) = -1 ENOTTY (Inappropriate ioctl for device)
fstat64(3, {st_mode=S_IFREG|0444, st_size=4096, ...}) = 0
_llseek(3, 0, [0], SEEK_CUR)            = 0
select(4, [3], NULL, NULL, NULL)        = 1 (in [3])
read(3, "1400000 1300000 1200000 1100000 1"..., 4096) = 62
select(4, [3], NULL, NULL, NULL


Because Ruby (the scripting language) VM assume select system-call
against regular file don't block.  it because SUSv3 says "Regular files
shall always poll TRUE for reading and writing".  see
http://www.opengroup.org/onlinepubs/009695399/functions/poll.html it
seems valid assumption.

But sysfs_poll() don't keep this rule although sysfs file can read and
write always.

This patch restore proper poll behavior to sysfs.
/sys/block/md*/md/sync_action polling application and another sysfs
updating sensitive application still can use POLLERR and POLLPRI.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A sysfs attribute using sysfs_schedule_callback() to commit suicide
may end up calling device_unregister(), which will eventually call
a driver's ->remove function.

Drivers may call flush_scheduled_work() in their shutdown routines,
in which case lockdep will complain with something like the following:

  =============================================
  [ INFO: possible recursive locking detected ]
  2.6.29-rc8-kk #1
  ---------------------------------------------
  events/4/56 is trying to acquire lock:
  (events){--..}, at: [<ffffffff80257fc0>] flush_workqueue+0x0/0xa0

  but task is already holding lock:
  (events){--..}, at: [<ffffffff80257648>] run_workqueue+0x108/0x230

  other info that might help us debug this:
  3 locks held by events/4/56:
  #0:  (events){--..}, at: [<ffffffff80257648>] run_workqueue+0x108/0x230
  #1:  (&ss->work){--..}, at: [<ffffffff80257648>] run_workqueue+0x108/0x230
  #2:  (pci_remove_rescan_mutex){--..}, at: [<ffffffff803c10d1>] remove_callback+0x21/0x40

  stack backtrace:
  Pid: 56, comm: events/4 Not tainted 2.6.29-rc8-kk #1
  Call Trace:
  [<ffffffff8026dfcd>] validate_chain+0xb7d/0x1260
  [<ffffffff8026eade>] __lock_acquire+0x42e/0xa40
  [<ffffffff8026f148>] lock_acquire+0x58/0x80
  [<ffffffff80257fc0>] ? flush_workqueue+0x0/0xa0
  [<ffffffff8025800d>] flush_workqueue+0x4d/0xa0
  [<ffffffff80257fc0>] ? flush_workqueue+0x0/0xa0
  [<ffffffff80258070>] flush_scheduled_work+0x10/0x20
  [<ffffffffa0144065>] e1000_remove+0x55/0xfe [e1000e]
  [<ffffffff8033ee30>] ? sysfs_schedule_callback_work+0x0/0x50
  [<ffffffff803bfeb2>] pci_device_remove+0x32/0x70
  [<ffffffff80441da9>] __device_release_driver+0x59/0x90
  [<ffffffff80441edb>] device_release_driver+0x2b/0x40
  [<ffffffff804419d6>] bus_remove_device+0xa6/0x120
  [<ffffffff8043e46b>] device_del+0x12b/0x190
  [<ffffffff8043e4f6>] device_unregister+0x26/0x70
  [<ffffffff803ba969>] pci_stop_dev+0x49/0x60
  [<ffffffff803baab0>] pci_remove_bus_device+0x40/0xc0
  [<ffffffff803c10d9>] remove_callback+0x29/0x40
  [<ffffffff8033ee4f>] sysfs_schedule_callback_work+0x1f/0x50
  [<ffffffff8025769a>] run_workqueue+0x15a/0x230
  [<ffffffff80257648>] ? run_workqueue+0x108/0x230
  [<ffffffff8025846f>] worker_thread+0x9f/0x100
  [<ffffffff8025bce0>] ? autoremove_wake_function+0x0/0x40
  [<ffffffff802583d0>] ? worker_thread+0x0/0x100
  [<ffffffff8025b89d>] kthread+0x4d/0x80
  [<ffffffff8020d4ba>] child_rip+0xa/0x20
  [<ffffffff8020cebc>] ? restore_args+0x0/0x30
  [<ffffffff8025b850>] ? kthread+0x0/0x80
  [<ffffffff8020d4b0>] ? child_rip+0x0/0x20

Although we know that the device_unregister path will never acquire
a lock that a driver might try to acquire in its ->remove, in general
we should never attempt to flush a workqueue from within the same
workqueue, and lockdep rightly complains.

So as long as sysfs attributes cannot commit suicide directly and we
are stuck with this callback mechanism, put the sysfs callbacks on
their own workqueue instead of the global one.

This has the side benefit that if a suicidal sysfs attribute kicks
off a long chain of ->remove callbacks, we no longer induce a long
delay on the global queue.

This also fixes a missing module_put in the error path introduced
by sysfs-only-allow-one-scheduled-removal-callback-per-kobj.patch.

We never destroy the workqueue, but I'm not sure that's a
problem.
Reported-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The only way for a sysfs attribute to remove itself (without
deadlock) is to use the sysfs_schedule_callback() interface.

Vegard Nossum discovered that a poorly written sysfs ->store
callback can repeatedly schedule remove callbacks on the same
device over and over, e.g.

	$ while true ; do echo 1 > /sys/devices/.../remove ; done

If the 'remove' attribute uses the sysfs_schedule_callback API
and also does not protect itself from concurrent accesses, its
callback handler will be called multiple times, and will
eventually attempt to perform operations on a freed kobject,
leading to many problems.

Instead of requiring all callers of sysfs_schedule_callback to
implement their own synchronization, provide the protection in
the infrastructure.

Now, sysfs_schedule_callback will only allow one scheduled
callback per kobject. On subsequent calls with the same kobject,
return -EAGAIN.

This is a short term fix. The long term fix is to allow sysfs
attributes to remove themselves directly, without any of this
callback hokey pokey.

[cornelia.huck@de.ibm.com: s390 ccwgroup bits]

Reported-by: vegard.nossum@gmail.com
Signed-off-by: NAlex Chiang <achiang@hp.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Because they can be, and because code like this produces a warning if
they're not:

struct device_attribute dev_attr;

sysfs_notify(&kobj, NULL, dev_attr.attr.name);
Signed-off-by: NTrent Piepho <tpiepho@freescale.com>
CC: Neil Brown <neilb@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support sysfs_notify from atomic context with new sysfs_notify_dirent

sysfs_notify currently takes sysfs_mutex.
This means that it cannot be called in atomic context.
sysfs_mutex  is sometimes held over a malloc (sysfs_rename_dir)
so it can block on low memory.

In md I want to be able to notify on a sysfs attribute from
atomic context, and I don't want to block on low memory because I
could be in the writeout path for freeing memory.

So:
 - export the "sysfs_dirent" structure along with sysfs_get, sysfs_put
   and sysfs_get_dirent so I can get the sysfs_dirent that I want to
   notify on and hold it in an md structure.
 - split sysfs_notify_dirent out of sysfs_notify so the sysfs_dirent
   can be notified on with no blocking (just a spinlock).
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Print the name of the last-accessed sysfs file when we oops, to help track
down oopses which occur in sysfs store/read handlers.  Because these oopses
tend to not leave any trace of the offending code in the stack traces.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes
part of the warning section for better reporting/collection.  Also, with this,
one fo the if() sections collapses entirely into the WARN().
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sysfs_chmod_file() calls notify_change() to change the permission bits
on a sysfs file.  Replace with explicit call to sysfs_setattr() and
fsnotify_change().

This is equivalent, except that security_inode_setattr() is not
called.  This function is called by drivers, so the security checks do
not make any sense.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have a problem in scsi_transport_spi in that we need to customise
not only the visibility of the attributes, but also their mode.  Fix
this by making the is_visible() callback return a mode, with 0
indicating is not visible.

Also add a sysfs_update_group() API to allow us to change either the
visibility or mode of the files at any time on the fly.
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Requiring userspace to close and re-open sysfs attributes has been the
policy since before 2.6.12.  It allows userspace to get a consistent
snapshot of kernel state and consume it with incremental reads and seeks.

Now, if the file position is zero the kernel assumes userspace wants to see
the new value.  The application for this change is to allow a userspace
RAID metadata handler to check the state of an array without causing any
memory allocations.  Thus not causing writeback to a raid array that might
be blocked waiting for userspace to take action.

Cc: Neil Brown <neilb@suse.de>
Acked-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After an experimental deletion of the unnecessary inclusion of
<linux/slab.h> from the header file <linux/percpu.h>, the following
files under fs/sysfs were exposed as needing to explicitly include
<linux/slab.h>.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Try to find the culprit who caused
http://bugzilla.kernel.org/show_bug.cgi?id=10150

Cc: <balajirrao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the no longer needed subsys_attributes, they are all converted to
the more sensical kobj_attributes.

There is no longer a magic fallback in sysfs attribute operations, all
kobjects which create simple attributes need explicitely a ktype
assigned, which tells the core what was intended here.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I can't see a reason why these shouldn't work on every group.  However,
they only seem to work on named groups.  This patch allows the group
functions to work on anonymous groups (those with NULL names).
Acked-by: NTejun Heo <htejun@gmail.com>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

I found that there is a off-by-one problem in the following code.

Version:	2.6.24-rc2
File:		fs/sysfs/file.c:118-122
Function:	fill_read_buffer
--------------------------------------------------------------------
	count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page);

	sysfs_put_active_two(attr_sd);

	BUG_ON(count > (ssize_t)PAGE_SIZE);
--------------------------------------------------------------------

Because according to the specification of the sysfs and the implement of
the show methods, the show methods return the number of bytes which would
be generated for the given input, excluding the trailing null.So if the
return value of the show methods equals PAGE_SIZE - 1, the buffer is full
in fact.  And if the return value equals PAGE_SIZE, the resulting string
was already truncated,or buffer overflow occurred.

This patch fixes an off-by-one error in fill_read_buffer.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NTejun Heo <teheo@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>