This fixes failure during initialization on Lynx Point LP devices.

ME driver needs to release the device from the reset
only after the FW has completed its flow and indicated
it by delivering an interrupt to the host.

This is the correct behavior for all the ME devices yet the
the previous versions are less susceptive to the implementation
that ignored FW reset completion indication.

We add mei_me_hw_reset_release function which is called
after reset from the interrupt thread or directly
from mei_reset during power down.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mei_stop calls mei_reset with disabling the interrupts.
It will have the same effect as the open code it replaces in the mei_remove.

The reset sequence on remove is required for the Lynx Point LP devices
to clean the reset state.

mei_stop is called from mei_pci_suspend and mei_remove functions
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently watchdog client is compiled with MEI and not
with MEI_ME

Fixes error:
When CONFIG_WATCHDOG is not enabled:

ERROR: "watchdog_unregister_device" [drivers/misc/mei/mei.ko] undefined!
ERROR: "watchdog_register_device" [drivers/misc/mei/mei.ko] undefined
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

during reset we clean up client data structures
we move that code into wrappers in client
and call the wrappers
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

we rename the mei_host_buffer_is_empty to keep naming
convention of hbuf and also make the query more generic
to be correct also for other under laying hardware
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

interrupt handler are  platform specifics so we move
them to hw-mei.c. For sake of that we need to export
write, read, and complete handlers from the interrupt.c
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We add struct mei_hw_ops to virtualize access to hw specific
configurations. This allows us to separate the compilation
of the ME interface from the ME hardware specifics
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is initial step of move the ME hw specifics
out of mei_device structure into mei_me_hw
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

leave misc file operations in the main
and move PCI related code into pci-me
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On systems where wd and amthif is not initialized
we will hit cl->dev == NULL. This condition is okay
so we don't need to be laud about it.

Fixes the follwing warning during suspend
[  137.061985] WARNING: at drivers/misc/mei/client.c:315 mei_cl_unlink+0x86/0x90 [mei]()
[  137.061986] Hardware name: 530U3BI/530U4BI/530U4BH
[  137.062140] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek joydev coretemp kvm_intel snd_hda_intel snd_hda_codec kvm arc4 iwldvm snd_hwdep i915 snd_pcm mac80211 ghash_clmulni_intel snd_page_alloc aesni_intel snd_seq_midi xts snd_seq_midi_event aes_x86_64 rfcomm snd_rawmidi parport_pc bnep lrw snd_seq uvcvideo i2c_algo_bit ppdev gf128mul iwlwifi snd_timer drm_kms_helper ablk_helper cryptd drm snd_seq_device videobuf2_vmalloc psmouse videobuf2_memops snd cfg80211 btusb videobuf2_core soundcore videodev lp bluetooth samsung_laptop wmi microcode mei serio_raw mac_hid video hid_generic lpc_ich parport usbhid hid r8169
[  137.062143] Pid: 2706, comm: kworker/u:15 Tainted: G      D W    3.8.0-rc2-next20130109-1-iniza-generic #1
[  137.062144] Call Trace:
[  137.062156]  [<ffffffff8105860f>] warn_slowpath_common+0x7f/0xc0
[  137.062159]  [<ffffffff8135b1ea>] ? ioread32+0x3a/0x40
[  137.062162]  [<ffffffff8105866a>] warn_slowpath_null+0x1a/0x20
[  137.062168]  [<ffffffffa0076be6>] mei_cl_unlink+0x86/0x90 [mei]
[  137.062173]  [<ffffffffa0071325>] mei_reset+0xc5/0x240 [mei]
[  137.062178]  [<ffffffffa0073703>] mei_pci_resume+0xa3/0x110 [mei]
[  137.062183]  [<ffffffff81379cae>] pci_pm_resume+0x7e/0xe0
[  137.062185]  [<ffffffff81379c30>] ? pci_pm_thaw+0x80/0x80
[  137.062189]  [<ffffffff8145a415>] dpm_run_callback.isra.6+0x25/0x50
[  137.062192]  [<ffffffff8145a6cf>] device_resume+0x9f/0x140
[  137.062194]  [<ffffffff8145a791>] async_resume+0x21/0x50
[  137.062200]  [<ffffffff810858b0>] async_run_entry_fn+0x90/0x1c0
[  137.062203]  [<ffffffff810778e5>] process_one_work+0x155/0x460
[  137.062207]  [<ffffffff81078578>] worker_thread+0x168/0x400
[  137.062210]  [<ffffffff81078410>] ? manage_workers+0x2b0/0x2b0
[  137.062214]  [<ffffffff8107d9f0>] kthread+0xc0/0xd0
[  137.062218]  [<ffffffff8107d930>] ? flush_kthread_worker+0xb0/0xb0
[  137.062222]  [<ffffffff816bac6c>] ret_from_fork+0x7c/0xb0
[  137.062228]  [<ffffffff8107d930>] ? flush_kthread_worker+0xb0/0xb0
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Let mei_device_init initialize all the software constructs.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move csr reading into me hardware functional calls.
Since we gave up on registers caching we remove some of the unnecessary
queries in mei_hw_init ane mei_reset functions.

We add mei_hw_config function to wrap up host buffer depth configuration.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now when mei_hcsr_set is local to hw-me.c
we can benefit form the fact that it wraps
H_IS removal from the host csr.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add mei_host_set_ready function to enable the device
and is_ready function to query the host and me readiness
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Open code mei_hw_reset to avoid using cached hcsr.
Using cached hcsr can cause unwanted side effects.

Move mei_hw_restet function to hw-me.c as it is hw dependent
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function mei_csr_clear_his is not implemented
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

need_reset is not used anymore
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the kernel doc for the functions in hw-me.c
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the amthif state is not examined until amthif is connected
we can safely move it to the amthif host init function
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In order we can use the same code pattern for in-kernel
and user space host clients we replace mei_cl_link_to_me
with mei_cl_link function.
We then have to keep me client lookupout of the new link function.

The unlinking cannot be yet symetric due to amthif connection
handling
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

the only real thing that left was mei_amthi_guid
the rest was in the strings and comments
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mei_task_initialize_clients and mei_initialize_clients
are no longer among us
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

rename function to mei_me_cl_allocate to match the current
names convention: mei_hbm_me_cl_allocate
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

read_pending never changes, it is a leftover from the old code.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename hw-me.h to hw-me-regs.h as this file
contains only register definitions.
Files hw-me.[ch] now contains ME hw dependant
functionality
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

interface.h contains lower layer functionality
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement mei_cl_connect that warps host client
parts of the connection and leave the ioctl specifics
in the mei_ioctl_connect_client function.
Move mei_ioctl_connect_client to main.c where it
belongs
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use common prefix for function names:

mei_cl_  - for host clients
mei_me_  - for me clients
mei_io_  - for io callback functions

Because mei_cl holds mei_device back pointer
we can also drop the dev argument from the client
functions

add client.h header to export the clients API
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This file now contains me and host client functions
and also io callback helpers
We also kill iorw.c which is no longer needed
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

hbm.h provides access host bus messaging functionality
for other MEI layers
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Add common prefix mei_hbm_ to all handlers
and made them static
2. Drop now useless function  same_flow_addr
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. use mei_hbm_ for basic host bus message function
2. use mei_hbm_cl prefix for host bus messages that operation
on behalf of a client
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We can drop useless castings and use proper types.
We remove the casting in mei_hbm_hdr function
and add new function mei_hbm_stop_request_prepare that
utilize the new structure
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Define a new parent type mei_hbm_cl_cmd for hbm
commands that are sent on behalf of specific ME client.
This allows us compacting boilerplate code via mei_hbm_cl_hdr
function
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mei_amthif_read_message prototype was not dropped
in one of the moving/renaming patches
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

for sake of more layered design we move host
bus message handling to the new hbm.c file
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. move direct register handling to interface.c and make them static
2. add new function mei_clear_interrupts that wraps direct register
access
3. export other functions in mei_dev.h
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move struct mei_me_client from hw.h to mei_dev.h as it is not
part of the hardware API. The structutre doesn't have to
be packed. Add kdoc for this structure.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>