- 09 9月, 2009 6 次提交
-
-
由 Tejun Heo 提交于
Gigabyte GA-MA69VM-S2 can't do 64bit DMA either. It's yet unknown whether recent BIOS fixes the problem. Blacklist regardless of BIOS revisions for now. Sandor Bodo-Merle reported and provided the initial patch for this issue. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NSandor Bodo-Merle <sbodomerle@gmail.com> Cc: Shane Huang <shane.huang@amd.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
It turns out ASUS M2A-VM isn't the only one with the 32bit DMA problem. Make ahci_asus_m2a_vm_32bit_only() more generic using the new dmi_get_date() and rename it to ahci_sb600_32bit_only(). Cut off date is now pointed to by dmi_system_id->driver_data in "yyyymmdd" format and it's now also allowed to be omitted. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Sandor Bodo-Merle <sbodomerle@gmail.com> Cc: Shane Huang <shane.huang@amd.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
There are cases where full date information is required instead of just the year. Add month and day parsing to dmi_get_year() and rename it to dmi_get_date(). As the original function only required '/' followed by any number of parseable characters at the end of the string, keep that behavior to avoid upsetting existing users. The new function takes dates of format [mm[/dd]]/yy[yy]. Year, month and date are checked to be in the ranges of [1-9999], [1-12] and [1-31] respectively and any invalid or out-of-range component is returned as zero. The dummy implementation is updated accordingly but the return value is updated to indicate field not found which is consistent with how other dummy functions behave. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
Year parsing in dmi_get_year() had the following two bugs. * "00" is treated as invalid instead of 2000 because zero return from simple_strtoul() is treated as error. * "0N" where N >= 8 is treated as invalid of 200N because the leading 0 is considered to specify octal. Fix the above two bugs by using endptr to detect invalid number and forcing decimal. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
ata_scsi_pass_thru() was checking for input sanity and disallowed commands while initializaing qc from scmd. TPM filtering was added right after protocol check at which point tf wasn't initialized properly. This means that TPM filtering has never really worked. This patch fixes the bug by reorganizing ata_scsi_pass_thru() such that qc is fully initialized before checking for invalid conditions which is way less error prone. Discovered while Thilo-Alexander Ginkel was trying debug patches for bko#13416. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Thilo-Alexander Ginkel <thilo@ginkel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
During introduction of slave_link, sata_sis slipped through the crack and left with ad-hoc merged SCR access. As SCR status was shared for both the master and slave devices, when only one of the device is online, libata EH would think both are online but would only get valid device signature for the actually present one, which in turn trigger the probing safety net mechanism and make EH retry causing large delay during boot. This patch converts sata_sis to slave_link mechanism. This bug was reported by TAXI in bko#14075. http://bugzilla.kernel.org/show_bug.cgi?id=14075Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NTAXI <taxi@a-city.de> Cc: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 02 9月, 2009 11 次提交
-
-
由 Robert Hancock 提交于
The sil24 hardware has a built-in list of commands and associated protocols that gets used by default to decide how to handle a given command. However, if the command is not known to the controller then it presumably assumes it to be a non-data command which then causes protocol mismatch errors if the device ends up requesting data transfer. The new DATA SET MANAGEMENT - Trim command causes this issue since it's a DMA data-out command. Since we should always know best what protocol the command should be using, let's just set the override flag to inform the controller what protocol to use for all non-ATAPI commands with data transfer. Signed-off-by: NRobert Hancock <hancockrwd@gmail.com> Tested-by: NMark Lord <liml@rtr.ca> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Matthew Garrett 提交于
AHCI exports various capability bits that may be of interest to userspace such as whether the BIOS claims a port is hotpluggable or eSATA. Providing these via sysfs along with the version of the AHCI spec implemented by the host allows userspace to make policy decisions for things like ALPM. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Martin K. Petersen 提交于
Now that the SCSI disk driver correctly handles non-rotational devices we can move setting the queue flag to SCSI. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alan Cox 提交于
From: Alan Cox <alan@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
This was a hack to give userland shutdown tools time to drop manual spindown. All popular distros updated quite some time ago and the due is well passed. Drop it. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Robert Hancock 提交于
This patch improve libata's output for error/notification messages to allow easier comprehension and debugging: When ATAPI commands issued through the SCSI layer fail, use SCSI functions to print the CDB in human-readable form instead of just dumping out the CDB in hex. Print out the name of the failed command (as defined by the ATA specification) in error handling output along with the raw register contents. When reporting status of ACPI taskfile commands executed on resume, also output the names of the commands being executed (or not) in readable form. Since the extra data for printing command names increases kernel size slightly, a config option has been added to allow disabling command name output (as well as some of the error register parsing) for those highly sensitive to kernel text size. Signed-off-by: NRobert Hancock <hancockrwd@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
Resets are done with port frozen but some controllers still issue interrupts during reset and they may end up recording error conditions in ehi leading to unnecessary EH retrials. This patch makes ata_eh_reset() clear ehi on reset completion. As reset is the most severe recovery action, there's nothing to lose by clearing ehi on its completion. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NZdenek Kaspar <zkaspar82@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Shaohua Li 提交于
Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
We must disable the DMA engine before accessing taskfile registers. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Call the ->freeze() hook before aborting qc's, because some hardware requires special handling prior to accessing the taskfile registers (for diagnosis/analysis/reset). Most notably, hardware may wish to disable the DMA engine or interrupts in the ->freeze() hook. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 01 9月, 2009 6 次提交
-
-
由 Ian Kent 提交于
In the recent change by Al Viro that changes verious subsystems to use "struct path" one case was missed in the autofs4 module which causes mounts to no longer expire. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889A ALSA: hda - Add missing mux check for VT1708
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors. V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true V4L/DVB (12457): zr364: wrong indexes V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces V4L/DVB (12450): Siano: Fixed SDIO compilation bugs V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices
-
由 Benjamin Herrenschmidt 提交于
My previous patch (commit 4f8ee2c9: "lmb: Remove __init from lmb_end_of_DRAM()") removed __init in lmb.c but missed the fact that it was also marked as such in the .h Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Commit log for commit 517d3cc1 ("[libata] ata_piix: Enable parallel scan") says: This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. and it is all true but once we put all things together additional constraints for PATA controllers show up (some hardware registers have per-host not per-port atomicity) and we risk misprogramming the controller. I used the following test to check whether the issue is real: @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_ (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); - if (is_slave) + if (is_slave) { + if (ap->port_no == 0) { + u8 tmp = slave_data; + + while (slave_data == tmp) { + pci_read_config_byte(dev, slave_port, &tmp); + msleep(50); + } + + dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan " + "race detected\n"); + } pci_write_config_byte(dev, slave_port, slave_data); + } /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ and it indeed triggered the error message. Lets fix all such races by adding an extra locking to ->set_piomode and ->set_dmamode methods for PATA controllers. [ Alan: would be better to take the host lock in libata-core for these cases so that we fix all the adapters in one swoop. "Looks fine as a temproary quickfix tho" ] Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: NAlan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
-
- 31 8月, 2009 10 次提交
-
-
由 Takashi Iwai 提交于
This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1 quirk with ALC889A codec, which caused the silent headphone output. Also, this gives the individual Headphone and Speaker volume controls. Reference: kernel bug#14078 http://bugzilla.kernel.org/show_bug.cgi?id=14078Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Takashi Iwai 提交于
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joe Perches 提交于
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Randy Dunlap 提交于
Reported-by: NToralf Forster <toralf.foerster@gmx.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Shine Liu 提交于
We should call em28xx_ir_init(dev) only when disable_ir is true. Signed-off-by: NShine Liu <shinel@foxmail.com> Reviewed-by: NDevin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Roel Kluin 提交于
The order of indexes is reversed Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NAntoine Jacquet <royale@zerezo.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Udi Atar 提交于
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: NUdi Atar <udia@siano-ms.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Udi Atar 提交于
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: NUdi Atar <udia@siano-ms.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues] Signed-off-by: NSteve Gotthardt <gotthardt@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 8月, 2009 2 次提交
-
-
由 David Müller (ELSOFT AG) 提交于
Use VBT information to determine which DDC bus to use for CRTDCC. Fall back to GPIOA if VBT info is not available. Signed-off-by: NDavid Müller <d.mueller@elsoft.ch> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net> Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
-
由 Eric Anholt 提交于
The lack of a proper LRU was partially worked around by taking the fence from the object containing the oldest seqno. But if there are multiple objects inactive, then they don't have seqnos and the first fence reg among them would be chosen. If you were trying to copy data between two mappings, this could result in each page fault stealing the fence from the other argument, and your application hanging. https://bugs.freedesktop.org/show_bug.cgi?id=23566 https://bugs.freedesktop.org/show_bug.cgi?id=23220 https://bugs.freedesktop.org/show_bug.cgi?id=23253 https://bugs.freedesktop.org/show_bug.cgi?id=23366 Cc: Stable Team <stable@kernel.org> Signed-off-by: NEric Anholt <eric@anholt.net> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 29 8月, 2009 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: don't free non-existent backlight in acpi video module toshiba_acpi: return on a fail path ACPICA: Windows compatibility fix: same buffer/string store
-
git://git.infradead.org/users/eparis/notify由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/users/eparis/notify: inotify: update the group mask on mark addition inotify: fix length reporting and size checking inotify: do not send a block of zeros when no pathname is available
-
由 Grant Grundler 提交于
On Tue, Aug 18, 2009 at 01:45:17PM -0400, John David Anglin wrote: > CC arch/parisc/kernel/traps.o > arch/parisc/kernel/traps.c: In function 'handle_interruption': > arch/parisc/kernel/traps.c:535:18: warning: operation on 'regs->iasq[0]' > may be undefined Yes - Line 535 should use both [0] and [1]. Reported-by: NJohn David Anglin <dave@hiauly1.hia.nrc.ca> Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
This patch fixes the bug that was reported in http://bugzilla.kernel.org/show_bug.cgi?id=14053 If we're in the case where we need to force a reencode and then resend of the RPC request, due to xprt_transmit failing with a networking error, then we _must_ retransmit the entire request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
> James Bottomley (1): > module: workaround duplicate section names -tip testing found that this patch breaks the build on x86 if CONFIG_KALLSYMS is disabled: kernel/module.c: In function ‘load_module’: kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’ distcc[8269] ERROR: compile kernel/module.c on ph/32 failed make[1]: *** [kernel/module.o] Error 1 make: *** [kernel] Error 2 make: *** Waiting for unfinished jobs.... Commit 1b364bf4 misses the fact that section attributes are only built and dealt with if kallsyms is enabled. The patch below fixes this. ( note, technically speaking this should depend on CONFIG_SYSFS as well but this patch is correct too and keeps the #ifdef less intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. ) Signed-off-by: NIngo Molnar <mingo@elte.hu> [ Replaced patch with a slightly cleaner variation by James Bottomley ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-