- 13 3月, 2018 8 次提交
-
-
由 Razmik Karapetyan 提交于
Disabled only that ISOC endpoints,for which interrupt bit was set in the DAINTMSK register. This will allow to minimize incomplete ISOC IN interrupt handling. Acked-by: NJohn Youn <johnyoun@synopsys.com> Signed-off-by: NRazmik Karapetyan <razmik@synopsys.com> Signed-off-by: NMinas Harutyunyan <hminas@synopsys.com> Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Razmik Karapetyan 提交于
Changed AHB burst size from INCR4 to INCR by default. With this value driver shows excellent DMA performance. Acked-by: NJohn Youn <johnyoun@synopsys.com> Signed-off-by: NRazmik Karapetyan <razmik@synopsys.com> Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Razmik Karapetyan 提交于
In dwc2_hsotg_core_init_disconnected() function used AHB burst size parameter, instead of calculating already calculated value. Acked-by: NJohn Youn <johnyoun@synopsys.com> Signed-off-by: NRazmik Karapetyan <razmik@synopsys.com> Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Sevak Arakelyan 提交于
Move dwc2_hsotg_wait_bit_set function to core.c so it can be used anywhere in the code. Added dwc2_hsotg_wait_bit_clear function in core.c. Replace all the parts of register bit polling code with dwc2_hsotg_wait_bit_set or dwc2_hsotg_wait_bit_clear functions calls depends on code logic. Acked-by: NJohn Youn <johnyoun@synopsys.com> Signed-off-by: NSevak Arakelyan <sevaka@synopsys.com> Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Gevorg Sahakyan 提交于
Only check the ID portion of the GSNPSID register and don’t check the version. This will allow the driver to work with version 4.00a and later of the DWC_hsotg IP. Acked-by: NJohn Youn <johnyoun@synopsys.com> Signed-off-by: NGevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: NMinas Harutyunyan <hminas@synopsys.com> Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Lars-Peter Clausen 提交于
Some UDC drivers (like the DWC3) expect that the response to a setup() request is queued from within the setup function itself so that it is available as soon as setup() has completed. Upon receiving a setup request the function fs driver creates an event that is made available to userspace. And only once userspace has acknowledged that event the response to the setup request is queued. So it violates the requirement of those UDC drivers and random failures can be observed. This is basically a race condition and if userspace is able to read the event and queue the response fast enough all is good. But if it is not, for example because other processes are currently scheduled to run, the USB host that sent the setup request will observe an error. To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS return code. If a setup() callback returns this value the UDC driver is aware that response is not yet available and can uses the appropriate methods to handle this case. Since in the case of function fs the response will never be available when the setup() function returns make sure that this status code is used. This fixed random occasional failures that were previously observed on a DWC3 based system under high system load. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Lars-Peter Clausen 提交于
When using a AIO read() operation on the function FS gadget driver a URB is submitted asynchronously and on URB completion the received data is copied to the userspace buffer associated with the read operation. This is done from a kernel worker thread invoking copy_to_user() (through copy_to_iter()). And while the user space process memory is made available to the kernel thread using use_mm(), some architecture require in addition to this that the operation runs with USER_DS set. Otherwise the userspace memory access will fail. For example on ARM64 with Privileged Access Never (PAN) and User Access Override (UAO) enabled the following crash occurs. Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP Modules linked in: CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) Workqueue: events ffs_user_copy_worker task: ffffffc87afc8080 task.stack: ffffffc87a00c000 PC is at __arch_copy_to_user+0x190/0x220 LR is at copy_to_iter+0x78/0x3c8 [...] [<ffffff800847b790>] __arch_copy_to_user+0x190/0x220 [<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130 [<ffffff80080b8c64>] process_one_work+0x1dc/0x460 [<ffffff80080b8f38>] worker_thread+0x50/0x4b0 [<ffffff80080bf5a0>] kthread+0xd8/0xf0 [<ffffff8008083680>] ret_from_fork+0x10/0x50 Address this by placing a set_fs(USER_DS) before of the copy operation and revert it again once the copy operation has finished. This patch is analogous to commit d7ffde35 ("vhost: use USER_DS in vhost_worker thread") which addresses the same underlying issue. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Thinh Nguyen 提交于
Increase max_speed of the mass_storage driver for UDCs that support SuperSpeed Plus. The composite driver will pass this value to UDC core to set the device speed on probe (actual speed may be different depending on whether the USB controller supports it or other external factors). Signed-off-by: NThinh Nguyen <thinhn@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
- 08 3月, 2018 15 次提交
-
-
由 Chris Dickens 提交于
When the host wants to fetch OS descriptors, it sends two requests. The first is only for the header and the second for the full amount specified by the header in the first request. The OS descriptor handling code is distinguishing the header-only requests based on the wLength of the setup packet, but the same code is executed in both cases to construct the actual header. Simplify this by always constructing the header and then filling out the rest of the request if the wLength is greater than the size of the header. Also remove the duplicate code for queueing the request to ep0 by adding a goto label. Signed-off-by: NChris Dickens <christopher.a.dickens@gmail.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Chris Dickens 提交于
When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by: NChris Dickens <christopher.a.dickens@gmail.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Vardan Mikayelyan 提交于
The irq is available in hsotg already, so there's no need to pass it as separate function parameter. Signed-off-by: NVardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: NGrigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Ladislav Michl 提交于
As devm_ioremap_resource() checks for valid resource, make use of it instead of testing ourselves. As a bonus memory region is requested. Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Colin Ian King 提交于
Pointer tv_nexus is being initialized a value and this is never read and is later being updated with the same value. Remove the redundant initialization so that the assignment to tv_nexus is performed later and more local to when it is being read. Cleans up clang warning: drivers/usb/gadget/function/f_tcm.c:1097:25: warning: Value stored to 'tv_nexus' during its initialization is never read Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Wolfram Sang 提交于
Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Stefan Agner 提交于
The local variable event is of type enum usb_phy_events. Use the same enum value USB_EVENT_NONE instead of UX500_MUSB_NONE. This avoids a warning when building with clang: drivers/usb/phy/phy-ab8500-usb.c:906:30: warning: implicit conversion from enumeration type 'enum ux500_musb_vbus_id_status' to different enumeration type 'enum usb_phy_events' [-Wenum-conversion] enum usb_phy_events event = UX500_MUSB_NONE; ~~~~~ ^~~~~~~~~~~~~~~ Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Fabio Estevam 提交于
mxs_charger_secondary_detection() is only used in this file, so make it static. This fixes the following sparse warning: drivers/usb/phy/phy-mxs-usb.c:581:23: warning: symbol 'mxs_charger_secondary_detection' was not declared. Should it be static? Acked-by: NJun Li <jun.li@nxp.com> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Souptick Joarder 提交于
Use dma_pool_zalloc instead of dma_pool_alloc + memset Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Felipe Balbi 提交于
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Andy Shevchenko 提交于
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Andy Shevchenko 提交于
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Andy Shevchenko 提交于
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Andy Shevchenko 提交于
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Andy Shevchenko 提交于
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Cc: John Youn <johnyoun@synopsys.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
- 26 2月, 2018 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull Xtensa fixes from Max Filippov: "Two fixes for reserved memory/DMA buffers allocation in high memory on xtensa architecture - fix memory accounting when reserved memory is in high memory region - fix DMA allocation from high memory" * tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: support DMA buffers in high memory xtensa: fix high memory/reserved memory collision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A small set of fixes: - UAPI data type correction for hyperv - correct the cpu cores field in /proc/cpuinfo on CPU hotplug - return proper error code in the resctrl file system failure path to avoid silent subsequent failures - correct a subtle accounting issue in the new vector allocation code which went unnoticed for a while and caused suspend/resume failures" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations x86/topology: Fix function name in documentation x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system x86/apic/vector: Handle vector release on CPU unplug correctly genirq/matrix: Handle CPU offlining proper x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fix from Thomas Gleixner: "A single commit which shuts up a bogus GCC-8 warning" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Thomas Gleixner: "Three patches to fix memory ordering issues on ALPHA and a comment to clarify the usage scope of a mutex internal function" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() locking/mutex: Add comment to __mutex_owner() to deter usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull cleanup patchlet from Thomas Gleixner: "A single commit removing a bunch of bogus double semicolons all over the tree" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide/trivial: Remove ';;$' typo noise
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - fix a broken cast in nfs4_callback_recallany() - fix an Oops during NFSv4 migration events - make struct nlmclnt_fl_close_lock_ops static * tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: make struct nlmclnt_fl_close_lock_ops static nfs: system crashes after NFS4ERR_MOVED recovery NFSv4: Fix broken cast in nfs4_callback_recallany()
-
- 25 2月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - Add handling for a missing instruction in our 32-bit BPF JIT so that it can be used for seccomp filtering. - Add a missing NULL pointer check before a function call in new EEH code. - Fix an error path in the new ocxl driver to correctly return EFAULT. - The support for the new ibm,drc-info device tree property turns out to need several fixes, so for now we just stop advertising to firmware that we support it until the bugs can be ironed out. - One fix for the new drmem code which was incorrectly modifying the device tree in place. - Finally two fixes for the RFI flush support, so that firmware can advertise to us that it should be disabled entirely so as not to affect performance. Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord, Michael Bringmann. * tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Support firmware disable of RFI flush powerpc/pseries: Support firmware disable of RFI flush powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2 powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access powerpc/pseries: Revert support for ibm,drc-info devtree property powerpc/pseries: Fix duplicate firmware feature for DRC_INFO ocxl: Fix potential bad errno on irq allocation powerpc/eeh: Fix crashes in eeh_report_resume()
-
- 24 2月, 2018 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
-
由 Linus Torvalds 提交于
Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: "arm64 and perf fixes: - build error when accessing MPIDR_HWID_BITMASK from .S - fix CTR_EL0 field definitions - remove/disable some kernel messages on user faults (unhandled signals, unimplemented syscalls) - fix kernel page fault in unwind_frame() with function graph tracing - fix perf sleeping while atomic errors when booting with ACPI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix unwind_frame() for filtered out fn for function graph tracing arm64: Enforce BBM for huge IO/VMAP mappings arm64: perf: correct PMUVer probing arm_pmu: acpi: request IRQs up-front arm_pmu: note IRQs and PMUs per-cpu arm_pmu: explicitly enable/disable SPIs at hotplug arm_pmu: acpi: check for mismatched PPIs arm_pmu: add armpmu_alloc_atomic() arm_pmu: fold platform helpers into platform code arm_pmu: kill arm_pmu_platdata ARM: ux500: remove PMU IRQ bouncer arm64: __show_regs: Only resolve kernel symbols when running at EL1 arm64: Remove unimplemented syscall log message arm64: Disable unhandled signal log messages by default arm64: cpufeature: Fix CTR_EL0 field definitions arm64: uaccess: Formalise types for access_ok() arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips由 Linus Torvalds 提交于
Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk由 Linus Torvalds 提交于
Pull printk fixlet from Petr Mladek: "People expect to see the real pointer value for %px. Let's substitute '(null)' only for the other %p? format modifiers that need to deference the pointer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: avoid misleading "(null)" for %px
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Two bugfixes, one v4.16 regression fix, and two documentation fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Consider SCL GPIO optional i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula". i2c: bcm2835: Set up the rising/falling edge delays i2c: i801: Add missing documentation entries for Braswell and Kaby Lake i2c: designware: must wait for enable
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "These are mostly fixes for problems with merge window code. In addition we have one doc update (alua) and two dead code removals (aiclib and octogon) a spurious assignment removal (csiostor) and a performance improvement for storvsc involving better interrupt spreading and increasing the command per lun handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla4xxx: skip error recovery in case of register disconnect. scsi: aacraid: fix shutdown crash when init fails scsi: qedi: Cleanup local str variable scsi: qedi: Fix truncation of CHAP name and secret scsi: qla2xxx: Fix incorrect handle for abort IOCB scsi: qla2xxx: Fix double free bug after firmware timeout scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els() scsi: scsi_dh: Document alua_rtpg_queue() arguments scsi: Remove Makefile entry for oktagon files scsi: aic7xxx: remove aiclib.c scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: csiostor: remove redundant assignment to pointer 'ln' scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info scsi: qla2xxx: Fix memory corruption during hba reset test scsi: mpt3sas: fix an out of bound write
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of fixes for rc3: Exynos: - fixes for using monotonic timestamps - register definitions - removal of unused file ipu-v3L - minor changes - make some register arrays const+static - fix some leaks meson: - fix for vsync atomic: - fix for memory leak EDID parser: - add quirks for some more non-desktop devices - 6-bit panel fix. drm_mm: - fix a bug in the core drm mm hole handling cirrus: - fix lut loading regression Lastly there is a deadlock fix around runtime suspend for secondary GPUs. There was a deadlock between one thread trying to wait for a workqueue job to finish in the runtime suspend path, and the workqueue job it was waiting for in turn waiting for a runtime_get_sync to return. The fixes avoids it by not doing the runtime sync in the workqueue as then we always wait for all those tasks to complete before we runtime suspend" * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tve200: fix kernel-doc documentation comment include drm/edid: quirk Sony PlayStation VR headset as non-desktop drm/edid: quirk Windows Mixed Reality headsets as non-desktop drm/edid: quirk Oculus Rift headsets as non-desktop drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker ...
-
由 Eric Dumazet 提交于
pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-