Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
11 个月 前同步成功

通知 150
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 15 9月, 2009 22 次提交
  3. 14 9月, 2009 18 次提交
    • C
      fsync: wait for data writeout completion before calling ->fsync · 2daea67e
      由 Christoph Hellwig 提交于 
      Currenly vfs_fsync(_range) first calls filemap_fdatawrite to write out
the data, the calls into ->fsync to write out the metadata and then finally
calls filemap_fdatawait to wait for the data I/O to complete.  What sounds
like a clever micro-optimization actually is nast trap for many filesystems.

For many modern filesystems i_size or other inode information is only
updated on I/O completion and we need to wait for I/O to finish before
we can write out the metadata.  For old fashionen filesystems that
instanciate blocks during the actual write and also update the metadata
at that point it opens up a large window were we could expose uninitialized
blocks after a crash.  While a few filesystems that need it already wait
for the I/O to finish inside their ->fsync methods it is rather suboptimal
as it is done under the i_mutex and also always for the whole file instead
of just a part as we could do for O_SYNC handling.

Here is a small audit of all fsync instances in the tree:

 - spufs_mfc_fsync:
 - ps3flash_fsync:
 - vol_cdev_fsync:
 - printer_fsync:
 - fb_deferred_io_fsync:
 - bad_file_fsync:
 - simple_sync_file:

	don't care - filesystems/drivers do't use the page cache or are
	purely in-memory.

 - simple_fsync:
 - file_fsync:
 - affs_file_fsync:
 - fat_file_fsync:
 - jfs_fsync:
 - ubifs_fsync:
 - reiserfs_dir_fsync:
 - reiserfs_sync_file:

	never touch pagecache themselves.  We need to wait before if we do
	not want to expose stale data after an allocation.

 - afs_fsync:
 - fuse_fsync_common:

	do the waiting writeback itself in awkward ways, would benefit from
	proper semantics

 - block_fsync:

	Does a filemap_write_and_wait on the block device inode.  Because we
	now have f_mapping that is the same inode we call it on in vfs_fsync.
	So just removing it and letting the VFS do the work in one go would
	be an improvement.

 - btrfs_sync_file:
 - cifs_fsync:
 - xfs_file_fsync:

	need the wait first and currently do it themselves. would benefit from
	doing it outside i_mutex.

 - coda_fsync:
 - ecryptfs_fsync:
 - exofs_file_fsync:
 - shm_fsync:

	only passes the fsync through to the lower layer

 - ext3_sync_file:

	doesn't seem to care, comments are confusing.

 - ext4_sync_file:

	would need the wait to work correctly for delalloc mode with late
	i_size updates.  Otherwise the ext3 comment applies.

	currently implemens it's own writeback and wait in an odd way,
	could benefit from doing it properly.

 - gfs2_fsync:

	not needed for journaled data mode, but probably harmless there.
	Currently writes back data asynchronously itself.  Needs some
	major audit.

 - hostfs_fsync:

	just calls fsync/datasync on the host FD.  Without the wait before
	data might not even be inflight yet if we're unlucky.

 - hpfs_file_fsync:
 - ncp_fsync:

	no-ops.  Dangerous before and after.

 - jffs2_fsync:

	just calls jffs2_flush_wbuf_gc, not sure how this relates to data.

 - nfs_fsync_dir:

	just increments stats, claims all directory operations are synchronous

 - nfs_file_fsync:

	only writes out data???  Looks very odd.

 - nilfs_sync_file:

	looks like it expects all data done, but not sure from the code

 - ntfs_dir_fsync:
 - ntfs_file_fsync:

	appear to do their own data writeback.  Very convoluted code.

 - ocfs2_sync_file:

	does it's own data writeback, but no wait.  probably needs the wait.

 - smb_fsync:

	according to a comment expects all pages written already, probably needs
	the wait before.

This patch only changes vfs_fsync_range, removal of the wait in the methods
that have it is left to the filesystem maintainers.  Note that most
filesystems really do need an audit for their fsync methods given the
gems found in this very brief audit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      2daea67e
    • J
      vfs: Remove generic_osync_inode() and sync_page_range{_nolock}() · 18f2ee70
      由 Jan Kara 提交于 
      Remove these three functions since nobody uses them anymore.
Signed-off-by: NJan Kara <jack@suse.cz>
      18f2ee70
    • J
      fat: Opencode sync_page_range_nolock() · 2f3d675b
      由 Jan Kara 提交于 
      fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the
only user of generic_osync_inode() which does not have a file open.  So
opencode needed actions for FAT so that we can convert generic_osync_inode() to
a standard syncing path.

Update a comment about generic_osync_inode().

CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NJan Kara <jack@suse.cz>
      2f3d675b
    • J
      pohmelfs: Use new syncing helper · aa3caafe
      由 Jan Kara 提交于 
      Use new generic_write_sync() helper instead of sync_page_range().
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NJan Kara <jack@suse.cz>
      aa3caafe
    • J
      xfs: Convert sync_page_range() to simple filemap_write_and_wait_range() · af0f4414
      由 Jan Kara 提交于 
      Christoph Hellwig says that it is enough for XFS to call
filemap_write_and_wait_range() instead of sync_page_range() because we do
all the metadata syncing when forcing the log.

CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      af0f4414
    • J
      ocfs2: Update syncing after splicing to match generic version · d23c937b
      由 Jan Kara 提交于 
      Update ocfs2 specific splicing code to use generic syncing helper. The sync now
does not happen under rw_lock because generic_write_sync() acquires i_mutex
which ranks above rw_lock. That should not matter because standard fsync path
does not hold it either.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: NJan Kara <jack@suse.cz>
      d23c937b
    • J
      ntfs: Use new syncing helpers and update comments · ebbbf757
      由 Jan Kara 提交于 
      Use new syncing helpers in .write and .aio_write functions. Also
remove superfluous syncing in ntfs_file_buffered_write() and update
comments about generic_osync_inode().

CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
Signed-off-by: NJan Kara <jack@suse.cz>
      ebbbf757
    • J
      ext4: Remove syncing logic from ext4_file_write · 0d34ec62
      由 Jan Kara 提交于 
      The syncing is now properly handled by generic_file_aio_write() so
no special ext4 code is needed.

CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Signed-off-by: NJan Kara <jack@suse.cz>
      0d34ec62
    • J
      ext3: Remove syncing logic from ext3_file_write · e367626b
      由 Jan Kara 提交于 
      Syncing is now properly done by generic_file_aio_write() so no special logic is
needed in ext3.

CC: linux-ext4@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
      e367626b
    • J
      ext2: Update comment about generic_osync_inode · a2a735ad
      由 Jan Kara 提交于 
      We rely on generic_write_sync() now.

CC: linux-ext4@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
      a2a735ad
    • J
      vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode · 148f948b
      由 Jan Kara 提交于 
      Introduce new function for generic inode syncing (vfs_fsync_range) and use
it from fsync() path. Introduce also new helper for syncing after a sync
write (generic_write_sync) using the generic function.

Use these new helpers for syncing from generic VFS functions. This makes
O_SYNC writes to block devices acquire i_mutex for syncing. If we really
care about this, we can make block_fsync() drop the i_mutex and reacquire
it before it returns.

CC: Evgeniy Polyakov <zbr@ioremap.net>
CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      148f948b
    • C
      vfs: Rename generic_file_aio_write_nolock · eef99380
      由 Christoph Hellwig 提交于 
      generic_file_aio_write_nolock() is now used only by block devices and raw
character device. Filesystems should use __generic_file_aio_write() in case
generic_file_aio_write() doesn't suit them. So rename the function to
blkdev_aio_write() and move it to fs/blockdev.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      eef99380
    • J
      ocfs2: Use __generic_file_aio_write instead of generic_file_aio_write_nolock · 918941a3
      由 Jan Kara 提交于 
      Use the new helper. We have to submit data pages ourselves in case of O_SYNC
write because __generic_file_aio_write does not do it for us. OCFS2 developpers
might think about moving the sync out of i_mutex which seems to be easily
possible but that's out of scope of this patch.

CC: ocfs2-devel@oss.oracle.com
Acked-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>
      918941a3
    • J
      pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock · b04f9321
      由 Jan Kara 提交于 
      Use new helper __generic_file_aio_write(). Since the fs takes care of syncing
by itself afterwards, there are no more changes needed.

CC: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NJan Kara <jack@suse.cz>
      b04f9321
    • J
      vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write() · c7b50db2
      由 Jan Kara 提交于 
      generic_file_direct_write() and generic_file_buffered_write() called
generic_osync_inode() if it was called on O_SYNC file or IS_SYNC inode. But
this is superfluous since generic_file_aio_write() does the syncing as well.
Also XFS and OCFS2 which call these functions directly handle syncing
themselves. So let's have a single place where syncing happens:
generic_file_aio_write().

We slightly change the behavior by syncing only the range of file to which the
write happened for buffered writes but that should be all that is required.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
Signed-off-by: NJan Kara <jack@suse.cz>
      c7b50db2
    • J
      vfs: Export __generic_file_aio_write() and add some comments · e4dd9de3
      由 Jan Kara 提交于 
      Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add
comments to write helpers explaining how they should be used and export
__generic_file_aio_write() since it will be used by some filesystems.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      e4dd9de3
    • J
      vfs: Introduce filemap_fdatawait_range · d3bccb6f
      由 Jan Kara 提交于 
      This simple helper saves some filesystems conversion from byte offset
to page numbers and also makes the fdata* interface more complete.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      d3bccb6f
    • L
      Merge branch 'x86-setup-for-linus' of... · 0cc6d77e
      由 Linus Torvalds 提交于 
      Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, e820: Guard against array overflowed in __e820_add_region()
  x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables
      0cc6d77e