1. 02 3月, 2013 8 次提交
    • J
      kdb: Remove the ll command · 1b2caa2d
      Jason Wessel 提交于
      Recently some code inspection was done after fixing a problem with
      kmalloc used while in the kernel debugger context (which is not
      legal), and it turned up the fact that kdb ll command will oops the
      kernel.
      
      Given that there have been zero bug reports on the command combined
      with the fact it will oops the kernel it is clearly not being used.
      Instead of fixing it, it will be removed.
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      1b2caa2d
    • J
      kdb_main: fix help print · 074604af
      Jason Wessel 提交于
      The help command was chopping all the usage instructions such that
      they were not readable.
      
      Example:
      
      bta             [D|R|S|T|C|Z|E|U|I| Backtrace all processes matching state flag
      per_cpu         <sym> [<bytes>] [<c Display per_cpu variables
      
      Where as it should look like:
      
      bta             [D|R|S|T|C|Z|E|U|I|M|A]
                                          Backtrace all processes matching state flag
      per_cpu         <sym> [<bytes>] [<cpu>]
                                          Display per_cpu variables
      
      All that is needed is to check the how long the cmd_usage is and jump
      to the next line when appropriate.
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      074604af
    • J
      kdb: Fix overlap in buffers with strcpy · 4eb7a66d
      Jason Wessel 提交于
      Maxime reported that strcpy(s->usage, s->usage+1) has no definitive
      guarantee that it will work on all archs the same way when you have
      overlapping memory.  The fix is simple for the kdb code because we
      still have the original string memory in the function scope, so we
      just have to use that as the argument instead.
      Reported-by: NMaxime Villard <rustyBSD@gmx.fr>
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      4eb7a66d
    • R
      Fixed dead ifdef block by adding missing Kconfig option. · 3b0eb71e
      Robert Obermeier 提交于
      Added missing Kconfig option KDB_CONTINUE_CATASTROPHIC which lead to a dead
      ifdef block in kernel/debug/kdb/kdb_main.c:73-75.
      
      The code using KDB_CONTINUE_CATASTROPHIC was originally introduced in
      commit '5d5314d6' by Jason Wessel.
      This patchset ("kdb: core for kgdb back end (1 of 2)")
      added platform independent part of kdb to the linux kernel.
      
      The Kernel option however, even though it had the same options and
      behaviour on all supported architectures, was part of the x86 and
      ia64 patchset of KDB and therefore not pulled into the mainline kernel tree.
      
      I actually took the originally written Kconfig by
      Keith Owens <kaos@sgi.com> (2003-06-20 according to KDB changelog)
      and changed it to reflect the correct behaviour,
      as the KDUMP patchset is not part of the kernel and the expected
      functionality is missing from it.
      Signed-off-by: NRobert Obermeier <obbi89@googlemail.com>
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      3b0eb71e
    • M
      kdb: Setup basic kdb state before invoking commands via kgdb · 00370b8f
      Matt Klein 提交于
      Although invasive kdb commands are not supported via kgdb, some useful
      non-invasive commands like bt* require basic kdb state to be setup before
      calling into the kdb code. Factor out some of this code and call it before
      and after executing kdb commands via kgdb.
      Signed-off-by: NMatt Klein <mklein@twitter.com>
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      00370b8f
    • S
      kdb: use ARRAY_SIZE where possible · 5f784f79
      Sasha Levin 提交于
      Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      5f784f79
    • T
      kgdb/kgdbts: support ppc64 · e78acf67
      Tiejun Chen 提交于
      We can't look up the address of the entry point of the function simply
      via that function symbol for all architectures.
      
      For PPC64 ABI, actually there is a function descriptors structure.
      
      A function descriptor is a three doubleword data structure that contains
      the following values:
      	* The first doubleword contains the address of the entry point of
      		the function.
      	* The second doubleword contains the TOC base address for
      		the function.
      	* The third doubleword contains the environment pointer for
      		languages such as Pascal and PL/1.
      
      So we should call a wapperred dereference_function_descriptor() to get
      the address of the entry point of the function.
      
      Note this is also safe for other architecture after refer to
      "include/asm-generic/sections.h" since:
      
      dereference_function_descriptor(p) always is (p) if without arched definition.
      Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      e78acf67
    • J
      kdb: A fix for kdb command table expansion · f7c82d5a
      John Blackwood 提交于
      When locally adding in some additional kdb commands, I stumbled
      across an issue with the dynamic expansion of the kdb command table.
      When the number of kdb commands exceeds the size of the statically
      allocated kdb_base_commands[] array, additional space is allocated in
      the kdb_register_repeat() routine.
      
      The unused portion of the newly allocated array was not being initialized
      to zero properly and this would result in segfaults when help '?' was
      executed or when a search for a non-existing command would traverse the
      command table beyond the end of valid command entries and then attempt
      to use the non-zeroed area as actual command entries.
      Signed-off-by: NJohn Blackwood <john.blackwood@ccur.com>
      Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
      f7c82d5a
  2. 19 2月, 2013 3 次提交
  3. 16 2月, 2013 7 次提交
  4. 15 2月, 2013 3 次提交
  5. 14 2月, 2013 16 次提交
    • T
      omapdrm: fix the dependency to omapdss · 91e83ffd
      Tomi Valkeinen 提交于
      omapdrm uses "select" in Kconfig to enable omapdss. This doesn't work
      correctly, as "select" forces omapdss to be enabled in the config even
      if it normally could not be enabled because of missing Kconfig
      dependencies.
      
      This causes a build break on ARM, when using allyesconfig:
      
      drivers/video/omap2/dss/dss.c: In function 'dss_calc_clock_div':
      drivers/video/omap2/dss/dss.c:572:20: error: 'CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK' undeclared (first use in this function)
      drivers/video/omap2/dss/dss.c:572:20: note: each undeclared identifier is reported only once for each function it appears in
      
      Instead of using select, this patch changes omapdrm to use "depend
      on".
      Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
      91e83ffd
    • N
      OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list · eb91e79b
      NeilBrown 提交于
      commit 195e672a
         OMAPDSS: DPI: Remove cpu_is_xxxx checks
      
      made the mistake of assuming that cpu_is_omap34xx() is exclusive of
      other cpu_is_* predicates whereas it includes cpu_is_omap3630().
      
      So on an omap3630, code that was previously enabled by
        if (cpu_is_omap34xx())
      is now disabled as
        dss_has_feature(FEAT_DPI_USES_VDDS_DSI)
      fails.
      
      So add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list.
      
      Cc: Chandrabhanu Mahapatra <cmahapatra@ti.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
      eb91e79b
    • S
      efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter · 1de63d60
      Satoru Takeuchi 提交于
      There was a serious problem in samsung-laptop that its platform driver is
      designed to run under BIOS and running under EFI can cause the machine to
      become bricked or can cause Machine Check Exceptions.
      
          Discussion about this problem:
          https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557
          https://bugzilla.kernel.org/show_bug.cgi?id=47121
      
          The patches to fix this problem:
          efi: Make 'efi_enabled' a function to query EFI facilities
          83e68189
      
          samsung-laptop: Disable on EFI hardware
          e0094244
      
      Unfortunately this problem comes back again if users specify "noefi" option.
      This parameter clears EFI_BOOT and that driver continues to run even if running
      under EFI. Refer to the document, this parameter should clear
      EFI_RUNTIME_SERVICES instead.
      
      Documentation/kernel-parameters.txt:
      ===============================================================================
      ...
      	noefi		[X86] Disable EFI runtime services support.
      ...
      ===============================================================================
      
      Documentation/x86/x86_64/uefi.txt:
      ===============================================================================
      ...
      - If some or all EFI runtime services don't work, you can try following
        kernel command line parameters to turn off some or all EFI runtime
        services.
      	noefi		turn off all EFI runtime services
      ...
      ===============================================================================
      Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
      Link: http://lkml.kernel.org/r/511C2C04.2070108@jp.fujitsu.com
      Cc: Matt Fleming <matt.fleming@intel.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      1de63d60
    • C
      xen: remove redundant NULL check before unregister_and_remove_pcpu(). · 4f8c8527
      Cyril Roelandt 提交于
      unregister_and_remove_pcpu on a NULL pointer is a no-op, so the NULL check in
      sync_pcpu can be removed.
      Signed-off-by: NCyril Roelandt <tipecaml@gmail.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      4f8c8527
    • J
      x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS. · 13d2b4d1
      Jan Beulich 提交于
      This fixes CVE-2013-0228 / XSA-42
      
      Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user
      in 32bit PV guest can use to crash the > guest with the panic like this:
      
      -------------
      general protection fault: 0000 [#1] SMP
      last sysfs file: /sys/devices/vbd-51712/block/xvda/dev
      Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4
      iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6
      xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4
      mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last
      unloaded: scsi_wait_scan]
      
      Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1
      EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0
      EIP is at xen_iret+0x12/0x2b
      EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010
      ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0
       DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069
      Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000)
      Stack:
       00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000
      Call Trace:
      Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00
      8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40
      10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02
      EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0
      general protection fault: 0000 [#2]
      ---[ end trace ab0d29a492dcd330 ]---
      Kernel panic - not syncing: Fatal exception
      Pid: 1250, comm: r Tainted: G      D    ---------------
      2.6.32-356.el6.i686 #1
      Call Trace:
       [<c08476df>] ? panic+0x6e/0x122
       [<c084b63c>] ? oops_end+0xbc/0xd0
       [<c084b260>] ? do_general_protection+0x0/0x210
       [<c084a9b7>] ? error_code+0x73/
      -------------
      
      Petr says: "
       I've analysed the bug and I think that xen_iret() cannot cope with
       mangled DS, in this case zeroed out (null selector/descriptor) by either
       xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT
       entry was invalidated by the reproducer. "
      
      Jan took a look at the preliminary patch and came up a fix that solves
      this problem:
      
      "This code gets called after all registers other than those handled by
      IRET got already restored, hence a null selector in %ds or a non-null
      one that got loaded from a code or read-only data descriptor would
      cause a kernel mode fault (with the potential of crashing the kernel
      as a whole, if panic_on_oops is set)."
      
      The way to fix this is to realize that the we can only relay on the
      registers that IRET restores. The two that are guaranteed are the
      %cs and %ss as they are always fixed GDT selectors. Also they are
      inaccessible from user mode - so they cannot be altered. This is
      the approach taken in this patch.
      
      Another alternative option suggested by Jan would be to relay on
      the subtle realization that using the %ebp or %esp relative references uses
      the %ss segment.  In which case we could switch from using %eax to %ebp and
      would not need the %ss over-rides. That would also require one extra
      instruction to compensate for the one place where the register is used
      as scaled index. However Andrew pointed out that is too subtle and if
      further work was to be done in this code-path it could escape folks attention
      and lead to accidents.
      Reviewed-by: NPetr Matousek <pmatouse@redhat.com>
      Reported-by: NPetr Matousek <pmatouse@redhat.com>
      Reviewed-by: NAndrew Cooper <andrew.cooper3@citrix.com>
      Signed-off-by: NJan Beulich <jbeulich@suse.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      13d2b4d1
    • D
      sparc64: Fix get_user_pages_fast() wrt. THP. · 89a77915
      David S. Miller 提交于
      Mostly mirrors the s390 logic, as unlike x86 we don't need the
      SetPageReferenced() bits.
      
      On sparc64 we also lack a user/privileged bit in the huge PMDs.
      
      In order to make this work for THP and non-THP builds, some header
      file adjustments were necessary.  Namely, provide the PMD_HUGE_* bit
      defines and the pmd_large() inline unconditionally rather than
      protected by TRANSPARENT_HUGEPAGE.
      Reported-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      89a77915
    • D
      sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. · b9156ebb
      David S. Miller 提交于
      This got missed in the cleanups done for the S390 THP
      support.
      
      CC: Gerald Schaefer <gerald.schaefer@de.ibm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b9156ebb
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 323a72d8
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
       "This is primarily to get those r8169 reverts sorted, but other fixes
        have accumulated meanwhile.
      
         1) Revert two r8169 changes to fix suspend/resume for some users,
            from Francois Romieu.
      
         2) PCI dma mapping errors in atl1c are not checked for and this cause
            hard crashes for some users, from Xiong Huang.
      
         3) In 3.8.x we merged the removal of the EXPERIMENTAL dependency for
            'dlm' but the same patch for 'sctp' got lost somewhere, resulting
            in the potential for build errors since there are cross
            dependencies.  From Kees Cook.
      
         4) SCTP's ipv6 socket route validation makes boolean tests
            incorrectly, fix from Daniel Borkmann.
      
         5) mac80211 does sizeof(ptr) instead of (sizeof(ptr) * nelem), from
            Cong Ding.
      
         6) arp_rcv() can crash on shared non-linear packets, from Eric
            Dumazet.
      
         7) Avoid crashes in macvtap by setting ->gso_type consistently in
            ixgbe, qlcnic, and bnx2x drivers.  From Michael S Tsirkin and
            Alexander Duyck.
      
         8) Trinity fuzzer spots infinite loop in __skb_recv_datagram(), fix
            from Eric Dumazet.
      
         9) STP protocol frames should use high packet priority, otherwise an
            overloaded bridge can get stuck.  From Stephen Hemminger.
      
        10) The HTB packet scheduler was converted some time ago to store
            internal timestamps in nanoseconds, but we don't convert back into
            psched ticks for the user during dumps.  Fix from Jiri Pirko.
      
        11) mwl8k channel table doesn't set the .band field properly,
            resulting in NULL pointer derefs.  Fix from Jonas Gorski.
      
        12) mac80211 doesn't accumulate channels properly during a scan so we
            can downgrade heavily to a much less desirable connection speed.
            Fix from Johannes Berg.
      
        13) PHY probe failure in stmmac can result in resource leaks and
            double MDIO registery later, from Giuseppe CAVALLARO.
      
        14) Correct ipv6 checksumming in ip6t_NPT netfilter module, also fix
            address prefix mangling, from YOSHIFUJI Hideaki."
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
        net, sctp: remove CONFIG_EXPERIMENTAL
        net: sctp: sctp_v6_get_dst: fix boolean test in dst cache
        batman-adv: Fix NULL pointer dereference in DAT hash collision avoidance
        net/macb: fix race with RX interrupt while doing NAPI
        atl1c: add error checking for pci_map_single functions
        htb: fix values in opt dump
        ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6
        net: fix infinite loop in __skb_recv_datagram()
        net: qmi_wwan: add Yota / Megafon M100-1 4g modem
        mwl8k: fix band for supported channels
        bridge: set priority of STP packets
        mac80211: fix channel selection bug
        arp: fix possible crash in arp_rcv()
        bnx2x: set gso_type
        qlcnic: set gso_type
        ixgbe: fix gso type
        stmmac: mdio register has to fail if the phy is not found
        stmmac: fix macro used for debugging the xmit
        Revert "r8169: enable internal ASPM and clock request settings".
        Revert "r8169: enable ALDPS for power saving".
        ...
      323a72d8
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 42976ad0
      Linus Torvalds 提交于
      Pull x86 fixes from Peter Anvin:
       "One (hopefully) last batch of x86 fixes.  You asked for the patch by
        patch justifications, so here they are:
      
            x86, MCE: Retract most UAPI exports
      
         This one unexports from userspace a bunch of definitions which should
         never have been exported.  We really don't want to create an
         accidental legacy here.
      
            x86, doc: Add a bootloader ID for OVMF
      
         This is a documentation-only patch, just recording the official
         assignment of a boot loader ID.
      
            x86: Do not leak kernel page mapping locations
      
         Security: avoid making it needlessly easy for user space to probe the
         kernel memory layout.
      
            x86/mm: Check if PUD is large when validating a kernel address
      
         Prevent failures using /proc/kcore when using 1G pages.
      
            x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
      
         Works around a BIOS problem causing boot failures on affected hardware."
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/mm: Check if PUD is large when validating a kernel address
        x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
        x86, doc: Add a bootloader ID for OVMF
        x86: Do not leak kernel page mapping locations
        x86, MCE: Retract most UAPI exports
      42976ad0
    • W
      MAINTAINERS: change my email and repos · 14d77c4d
      Wolfram Sang 提交于
      Change to my private email, change to my shiny new kernel.org repos,
      and drop outdated entry from the former maintainer. Drop my PCA entry,
      too, since it belongs to the I2C realm anyhow.
      Signed-off-by: NWolfram Sang <wolfram@the-dreams.de>
      14d77c4d
    • R
      PCI/PM: Clean up PME state when removing a device · 249bfb83
      Rafael J. Wysocki 提交于
      Devices are added to pci_pme_list when drivers use pci_enable_wake()
      or pci_wake_from_d3(), but they aren't removed from the list unless
      the driver explicitly disables wakeup.  Many drivers never disable
      wakeup, so their devices remain on the list even after they are
      removed, e.g., via hotplug.  A subsequent PME poll will oops when
      it tries to touch the device.
      
      This patch disables PME# on a device before removing it, which removes
      the device from pci_pme_list.  This is safe even if the device never
      had PME# enabled.
      
      This oops can be triggered by unplugging a Thunderbolt ethernet adapter
      on a Macbook Pro, as reported by Daniel below.
      
      [bhelgaas: changelog]
      Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.comReported-and-tested-by: NDaniel J Blueman <daniel@quora.org>
      Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      CC: stable@vger.kernel.org
      249bfb83
    • K
      net, sctp: remove CONFIG_EXPERIMENTAL · 3bdb1a44
      Kees Cook 提交于
      This config item has not carried much meaning for a while now and is
      almost always enabled by default. As agreed during the Linux kernel
      summit, remove it.
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
      Signed-off-by: NKees Cook <keescook@chromium.org>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3bdb1a44
    • D
      net: sctp: sctp_v6_get_dst: fix boolean test in dst cache · e9c0dfba
      Daniel Borkmann 提交于
      We walk through the bind address list and try to get the best source
      address for a given destination. However, currently, we take the
      'continue' path of the loop when an entry is invalid (!laddr->valid)
      *and* the entry state does not equal SCTP_ADDR_SRC (laddr->state !=
      SCTP_ADDR_SRC).
      
      Thus, still, invalid entries with SCTP_ADDR_SRC might not 'continue'
      as well as valid entries with SCTP_ADDR_{NEW, SRC, DEL}, with a possible
      false baddr and matchlen as a result, causing in worst case dst route
      to be false or possibly NULL.
      
      This test should actually be a '||' instead of '&&'. But lets fix it
      and make this a bit easier to read by having the condition the same way
      as similarly done in sctp_v4_get_dst.
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Acked-by: NNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e9c0dfba
    • P
      batman-adv: Fix NULL pointer dereference in DAT hash collision avoidance · 816cd5b8
      Pau Koning 提交于
      An entry in DAT with the hashed position of 0 can cause a NULL pointer
      dereference when the first entry is checked by batadv_choose_next_candidate.
      This first candidate automatically has the max value of 0 and the max_orig_node
      of NULL. Not checking max_orig_node for NULL in batadv_is_orig_node_eligible
      will lead to a NULL pointer dereference when checking for the lowest address.
      
      This problem was added in 785ea114
      ("batman-adv: Distributed ARP Table - create DHT helper functions").
      Signed-off-by: NPau Koning <paukoning@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      816cd5b8
    • N
      net/macb: fix race with RX interrupt while doing NAPI · 8770e91a
      Nicolas Ferre 提交于
      When interrupts are disabled, an RX condition can occur but
      it is not reported when enabling interrupts again. We need to check
      RSR and use napi_reschedule() if condition is met.
      Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8770e91a
    • H
      atl1c: add error checking for pci_map_single functions · ac574804
      Huang, Xiong 提交于
      it is reported that code hit DMA-API errors on 3.8-rc6+,
      (see https://bugzilla.redhat.com/show_bug.cgi?id=908436, and
           https://bugzilla.redhat.com/show_bug.cgi?id=908550)
      
      this patch just adds error handler for
          pci_map_single and skb_frag_dma_map.
      Signed-off-by: Nxiong <xiong@qca.qualcomm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ac574804
  6. 13 2月, 2013 3 次提交