The primary interrupt handler arch_do_IRQ() was passing hwirq as linux
virq to core code. This was fragile and worked so far as we only had legacy/linear
domains.

This came out of a rant by Marc Zyngier.
http://lists.infradead.org/pipermail/linux-snps-arc/2015-December/000298.html

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This will be needed for switching to linear irq domain as
irq_create_mapping() called by intr code needs the IRQ numbers
in addition to existing usage in mcip.c for requesting the irq
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

- Remove explicit clocksource setup and let it be done by OF framework
  by defining CLOCKSOURCE_OF_DECLARE() for various timers

- This allows multiple clocksources to be potentially registered
  simultaneouly: previously we could only do one - as all of them had
  same arc_counter_setup() routine for registration

- Setup routines also ensure that the underlying timer actually exists.

- Remove some of the panic() calls if underlying timer is NOT detected as
  fallback clocksource might still be available
  1. If GRFC doesn't exist, jiffies clocksource gets registered anyways
  2. if RTC doesn't exist, TIMER1 can take over (as it is always
     present)

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

 - timer frequency is derived from DT (no longer rely on top level
   DT "clock-frequency" probed early and exported by asm/clk.h)

 - TIMER0_IRQ need not be exported across arch code, confined to intc as
   it is property of same

 - Any failures in clockevent setup are considered pedantic and system
   panic()'s as there is no generic fallback (unlike clocksource where
   a jiffies based soft clocksource always exists)
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

ARC Timers have historically been probed directly.
As precursor to start probing Timers thru DT introduce these bindings
Note that to keep series bisectable, these bindings are not yet used in
code.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: devicetree@vger.kernel.org
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This allows us to introduce timers in DT in next commit

The core clk frequency hack in AXS103 platform is also extended,
where the core clk feeding into timers is updated in-place in FDT.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This is again for future changes to use common DTSI for timers which
refer to @core_intc
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

... and add them to plat-sim DTS.

This allows for future change to introduce timers in DT in single place
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

 - call clocksource_probe()
 - This in turns needs of_clk_init() to be called earlier

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NNoam Camus <noamc@ezchip.com>
[vgupta: broken off from a bigger patch]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

ARC Timers so far have been handled as "legacy" w/o explicit description
in DT. This poses challenge for newer platforms wanting to use them.
This series will eventually help move timers over to DT.

This patch does a small change of using a CPU notifier to set clockevent
on non-boot CPUs. So explicit setup is done only on boot CPU (which will
later be done by DT)
Signed-off-by: NNoam Camus <noamc@ezchip.com>
[vgupta: broken off from a bigger patch]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Reduces diff in future patches !
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

- The idea is to remove the API usage since it has a subltle
  design flaw - relies on being called on cpu0 first. This is true for
  some early per cpu irqs such as TIMER/IPI, but not for late probed
  per cpu peripherals such a perf. And it's usage in perf has already
  bitten us once: see c6317bc7
  ("ARCv2: perf: Ensure perf intr gets enabled on all cores") where we
  ended up open coding it anyways

- The seeming duplication will go away once we start using cpu notifier
  for timer setup
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This removes the quirk from arc_request_percpu_irq() and paves way for
future simplifications
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Do not load one entry beyond the end of the syscall table when the
syscall number of a traced process equals to __NR_Linux_syscalls.
Similar bug with regular processes was fixed by commit 3bb457af
("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls").

This bug was found by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NHelge Deller <deller@gmx.de>

Currently we read the tsc radio: ratio = (MSR_PLATFORM_INFO >> 8) & 0x1f;

Thus we get bit 8-12 of MSR_PLATFORM_INFO, however according to the SDM
(35.5), the ratio bits are bit 8-15.

Ignoring the upper bits can result in an incorrect tsc ratio, which causes the
TSC calibration and the Local APIC timer frequency to be incorrect.

Fix this problem by masking 0xff instead.

[ tglx: Massaged changelog ]

Fixes: 7da7c156 "x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs"
Signed-off-by: NChen Yu <yu.c.chen@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bin Gao <bin.gao@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1462505619-5516-1-git-send-email-yu.c.chen@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

After the THP refcounting change, obtaining a compound pages from
get_user_pages() no longer allows us to assume the entire compound page
is immediately mappable from a secondary MMU.

A secondary MMU doesn't want to call get_user_pages() more than once for
each compound page, in order to know if it can map the whole compound
page.  So a secondary MMU needs to know from a single get_user_pages()
invocation when it can map immediately the entire compound page to avoid
a flood of unnecessary secondary MMU faults and spurious
atomic_inc()/atomic_dec() (pages don't have to be pinned by MMU notifier
users).

Ideally instead of the page->_mapcount < 1 check, get_user_pages()
should return the granularity of the "page" mapping in the "mm" passed
to get_user_pages().  However it's non trivial change to pass the "pmd"
status belonging to the "mm" walked by get_user_pages up the stack (up
to the caller of get_user_pages).  So the fix just checks if there is
not a single pte mapping on the page returned by get_user_pages, and in
turn if the caller can assume that the whole compound page is mapped in
the current "mm" (in a pmd_trans_huge()).  In such case the entire
compound page is safe to map into the secondary MMU without additional
get_user_pages() calls on the surrounding tail/head pages.  In addition
of being faster, not having to run other get_user_pages() calls also
reduces the memory footprint of the secondary MMU fault in case the pmd
split happened as result of memory pressure.

Without this fix after a MADV_DONTNEED (like invoked by QEMU during
postcopy live migration or balloning) or after generic swapping (with a
failure in split_huge_page() that would only result in pmd splitting and
not a physical page split), KVM would map the whole compound page into
the shadow pagetables, despite regular faults or userfaults (like
UFFDIO_COPY) may map regular pages into the primary MMU as result of the
pte faults, leading to the guest mode and userland mode going out of
sync and not working on the same memory at all times.

Any other secondary MMU notifier manager (KVM is just one of the many
MMU notifier users) will need the same information if it doesn't want to
run a flood of get_user_pages_fast and it can support multiple
granularity in the secondary MMU mappings, so I think it is justified to
be exposed not just to KVM.

The other option would be to move transparent_hugepage_adjust to
mm/huge_memory.c but that currently has all kind of KVM data structures
in it, so it's definitely not a cut-and-paste work, so I couldn't do a
fix as cleaner as this one for 4.6.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: "Li, Liang Z" <liang.z.li@intel.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recursive undefined instrcution falut is seen with R-class taking an
exception. The reson for that is __show_regs() tries to get domain
information, but domains is not available on !MMU cores, like R/M
class.

Fix it by puting {set,get}_domain functions under CONFIG_CPU_CP15_MMU
guard and providing stubs for the case where domains is not supported.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 19accfd3 (ARM: move vector stubs) moved the vector stubs in an
additional page above the base vector one. This change wasn't taken into
account by the nommu memreserve.
This patch ensures that the kernel won't overwrite any vector stub on
nommu.

[changed the MPU side too]
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 1c2f87c2 (ARM: 8025/1: Get rid of meminfo) broke the support for
MPU on ARMv7-R. This patch adapts the code inside CONFIG_ARM_MPU to use
memblocks appropriately.

MPU initialisation only uses the first memory region, and removes all
subsequent ones. Because looping over all regions that need removal is
inefficient, and memblock_remove already handles memory ranges, we can
flatten the 'for_each_memblock' part.
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The code for checking whether a BAR address range is valid will break
out of the loop when a start address of 0x0 is encountered.

This behaviour is wrong since by breaking out of the loop we may miss
the BAR that describes the EFI frame buffer in a later iteration.

Because of this bug I can't use video=efifb: boot parameter to get
efifb on my new ThinkPad E550 for my old linux system hard disk with
3.10 kernel. In 3.10, efifb is the only choice due to DRM/I915 not
supporting the GPU.

This patch also add a trivial optimization to break out after we find
the frame buffer address range without testing later BARs.
Signed-off-by: NWang YanQing <udknight@gmail.com>
[ Rewrote changelog. ]
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: NPeter Jones <pjones@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462454061-21561-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>

Initial HIGHMEM support on ARC was introduced for PAE40 where the low
memory (0x8000_0000 based) and high memory (0x1_0000_0000) were
physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral
hole in the middle, which wasted a bit of struct page memory, but things
worked).

However w/o PAE, highmem was not possible and we could only reach
~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40
The idea is to have low memory at canonical 0x8000_0000 and highmem
at 0 so enire 4GB address space is available for physical addressing
This needs additional platform/interconnect mapping to convert
the non contiguous physical addresses into linear bus adresses.

From Linux point of view, non contiguous divide means FLATMEM no
longer works and DISCONTIGMEM is needed to track the pfns in the 2
regions.

This scheme would also work for PAE40, only better in that we don't
waste struct page memory for the peripheral hole.

The DT description will be something like

    memory {
        ...
        reg = <0x80000000 0x200000000   /* 512MB: lowmem */
               0x00000000 0x10000000>;  /* 256MB: highmem */
   }
Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

So a benign looking cleanup which macro'ized PAGE_SHIFT shifts turned
out to be bad (since it was done non-sensically across the board).

It caused boot failures with PAE40 as forced cast to (unsigned long)
from newly introduced virt_to_pfn() was causing truncatiion of the
(long long) pte/paddr values.

It is OK to use this in accessors dealing with kernel virtual address,
pointers etc, but not for PTE values themelves.

Fixes: cJ2ff5cf2735c ("ARC: mm: Use virt_to_pfn() for addr >> PAGE_SHIFT pattern)
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

While reviewing a different change to asm-generic/io.h Arnd spotted that
ARC ioread32 and ioread32be both of which come from asm-generic versions
are not symmetrical in terms of calling the io barriers.

generic ioread32   -> ARC readl()                  [ has barriers]
generic ioread32be -> __be32_to_cpu(__raw_readl()) [ lacks barriers]

While generic ioread32be is being remediated to call readl(), that involves
a swab32(), causing double swaps on ioread32be() on Big Endian systems.

So provide our versions of big endian IO accessors to ensure io barrier
calls while also keeping them optimal
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org  [4.2+]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The new sanity check introduced by:

  26657848 ("perf/core: Verify we have a single perf_hw_context PMU")

... triggered on the AMD IOMMU driver.

IOMMUs are not per logical CPU, they cannot have per-task counters. Fix it.
Reported-by: NBorislav Petkov <bp@alien8.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: jroedel@suse.de
Cc: suravee.suthikulpanit@amd.com
Link: http://lkml.kernel.org/r/20160423224255.GB3430@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

A while back the following commit:

  d394f2d9 ("x86/platform/UV: Remove EFI memmap quirk for UV2+")

changed uv_system_init() to only call map_low_mmrs() on older UV1 hardware,
which requires EFI_OLD_MEMMAP to be set in order to boot.

The recent changes to the EFI memory mapping code in:

  d2f7cbe7 ("x86/efi: Runtime services virtual mapping")

exposed some issues with the fact that we were relying on the EFI memory
mapping mechanisms to map in our MMRs for us, after commit d394f2d9.

Rather than revert the entire commit and go back to forcing
EFI_OLD_MEMMAP on all UVs, we're going to add the call to map_low_mmrs()
back into uv_system_init(), and then fix up our EFI runtime calls to use
the appropriate page table.

For now, UV2+ will still need efi=old_map to boot, but there will be
other changes soon that should eliminate the need for this.
Signed-off-by: NAlex Thorlton <athorlton@sgi.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Russ Anderson <rja@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Link: http://lkml.kernel.org/r/1462401592-120735-1-git-send-email-athorlton@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Everything the same as Skylake, just new model numbers.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461977748-17616-1-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The promise of pretty boot splashes from firmware via BGRT was at
best only that; a promise.  The kernel diligently checks to make
sure the BGRT data firmware gives it is valid, and dutifully warns
the user when it isn't.  However, it does so via the pr_err log
level which seems unnecessary.  The user cannot do anything about
this and there really isn't an error on the part of Linux to
correct.

This lowers the log level by using pr_notice instead.  Users will
no longer have their boot process uglified by the kernel reminding
us that firmware can and often is broken when the 'quiet' kernel
parameter is specified.  Ironic, considering BGRT is supposed to
make boot pretty to begin with.
Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Môshe van der Sterre <me@moshe.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462303781-8686-4-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>

In create_zero_mask() we have:

	addi	%1,%2,-1
	andc	%1,%1,%2
	popcntd	%0,%1

using the "r" constraint for %2. r0 is a valid register in the "r" set,
but addi X,r0,X turns it into an li:

	li	r7,-1
	andc	r7,r7,r0
	popcntd	r4,r7

Fix this by using the "b" constraint, for which r0 is not a valid
register.

This was found with a kernel build using gcc trunk, narrowed down to
when -frename-registers was enabled at -O2. It is just luck however
that we aren't seeing this on older toolchains.

Thanks to Segher for working with me to find this issue.

Cc: stable@vger.kernel.org
Fixes: d0cebfa6 ("powerpc: word-at-a-time optimization for 64-bit Little Endian")
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The davinci platform contains code that calls into the nvmem
subsystem, but that might be a loadable module, causing a
link error:

arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr':
:(.text+0x1088): undefined reference to `nvmem_device_read'
arch/arm/mach-davinci/built-in.o: In function `read_factory_config':
:(.text+0x214c): undefined reference to `nvmem_device_read'

Also, when NVMEM is completely disabled, the functions fail with
nonobvious error messages.

This ensures we only call the API functions when the code is actually
reachable from the board file, and otherwise prints a unique log
message.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: bec3c11b ("misc: at24: replace memory_accessor with nvmem_device_read")
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

This patch fixes a bug which was introduced by:

 b16a5b52 ("perf/x86: Add option to disable reading branch flags/cycles")

In this patch, lbr_sel_mask is used to mask the lbr_select. But LBR_SEL_MASK
doesn't include the bit for LBR_CALL_STACK. So LBR call stack will never be
set in lbr_select.

This patch corrects the LBR_SEL_MASK by including all valid bits in
LBR_SELECT. Also, the LBR_CALL_STACK bit is different as other bit in
LBR_SELECT. It does not operate in suppress mode, so it needs to be
specially handled in intel_pmu_setup_hw_lbr_filter.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1461231010-4399-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some versions of Intel PT do not support tracing across VMXON, more
specifically, VMXON will clear TraceEn control bit and any attempt to
set it before VMXOFF will throw a #GP, which in the current state of
things will crash the kernel. Namely:

  $ perf record -e intel_pt// kvm -nographic

on such a machine will kill it.

To avoid this, notify the intel_pt driver before VMXON and after
VMXOFF so that it knows when not to enable itself.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/87oa9dwrfk.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The entry for PERF_COUNT_HW_REF_CPU_CYCLES is not used on AMD, but is
referenced by filter_events() which expects undefined events to have a
value of 0.

Found via KASAN:

  UBSAN: Undefined behaviour in arch/x86/events/amd/core.c:132:30
  index 9 is out of range for type 'u64 [9]'
  UBSAN: Undefined behaviour in arch/x86/events/amd/core.c:132:9
  load of address ffffffff81c021c8 with insufficient space for an object of type 'const u64'
Signed-off-by: NAdam Borowski <kilobyte@angband.pl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1461749731-30979-1-git-send-email-kilobyte@angband.plSigned-off-by: NIngo Molnar <mingo@kernel.org>

If x86_vector_alloc_irq() fails x86_vector_free_irqs() is invoked to cleanup
the already allocated vectors. This subsequently calls clear_vector_irq().

The failed irq has no vector assigned, which triggers the BUG_ON(!vector) in
clear_vector_irq().

We cannot suppress the call to x86_vector_free_irqs() for the failed
interrupt, because the other data related to this irq must be cleaned up as
well. So calling clear_vector_irq() with vector == 0 is legitimate.

Remove the BUG_ON and return if vector is zero,

[ tglx: Massaged changelog ]

Fixes: b5dc8e6c "x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors"
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The secondary CPU starts up in ARM mode. When the kernel is compiled in
thumb2 mode we have to explicitly compile the secondary startup
trampoline in ARM mode, otherwise the CPU will go to Nirvana.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Reported-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Suggested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

The system call tracing bug fix mentioned in the Fixes tag
below increased the amount of assembler code in the sequence
of assembler files included by head_64.S

This caused to total set of code to exceed 0x4000 bytes in
size, which overflows the expression in head_64.S that works
to place swapper_tsb at address 0x408000.

When this is violated, the TSB is not properly aligned, and
also the trap table is not aligned properly either.  All of
this together results in failed boots.

So, do two things:

1) Simplify some code by using ba,a instead of ba/nop to get
   those bytes back.

2) Add a linker script assertion to make sure that if this
   happens again the build will fail.

Fixes: 1a40b953 ("sparc: Fix system call tracing register handling.")
Reported-by: NMeelis Roos <mroos@linux.ee>
Reported-by: NJoerg Abraham <joerg.abraham@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable reserved memory initialization from device tree.
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Depending on the size of the area to be memset'ed, the nios2 memset implementation
either uses a naive loop (for buffers smaller or equal than 8 bytes) or a more optimized
implementation (for buffers larger than 8 bytes). This implementation does 4-byte stores
rather than 1-byte stores to speed up memset.

However, we discovered that on our nios2 platform, memset() was not properly setting the
buffer to the expected value. A memset of 0xff would not set the entire buffer to 0xff, but to:

0xff 0x00 0xff 0x00 0xff 0x00 0xff 0x00 ...

Which is obviously incorrect. Our investigation has revealed that the problem lies in the
incorrect constraints used in the inline assembly.

The following piece of assembly, from the nios2 memset implementation, is supposed to
create a 4-byte value that repeats 4 times the 1-byte pattern passed as memset argument:

/* fill8 %3, %5 (c & 0xff) */
"       slli    %4, %5, 8\n"
"       or      %4, %4, %5\n"
"       slli    %3, %4, 16\n"
"       or      %3, %3, %4\n"

However, depending on the compiler and optimization level, this code might be compiled as:

34:	280a923a 	slli	r5,r5,8
38:	294ab03a 	or	r5,r5,r5
3c:	2808943a 	slli	r4,r5,16
40:	2148b03a 	or	r4,r4,r5

This is wrong because r5 gets used both for %5 and %4, which leads to the final pattern
stored in r4 to be 0xff00ff00 rather than the expected 0xffffffff.

%4 is defined with the "=r" constraint, i.e as an output operand. However, as explained in
http://www.ethernut.de/en/documents/arm-inline-asm.html, this does not prevent gcc from
using the same register for an output operand (%4) and input operand (%5). By using the
constraint modifier '&', we indicate that the register should be used for output only. With this
change, we get the following assembly output:

34:	2810923a 	slli	r8,r5,8
38:	4150b03a 	or	r8,r8,r5
3c:	400e943a 	slli	r7,r8,16
40:	3a0eb03a 	or	r7,r7,r8

Which correctly produces the 0xffffffff pattern when 0xff is passed as the memset() pattern.

It is worth mentioning the observed consequence of this bug: we were hitting the kernel
BUG() in mm/bootmem.c:__free() that verifies when marking a page as free that it was
previously marked as occupied (i.e that the bit was set to 1). The entire bootmem bitmap is
set to 0xff bit via a memset() during the bootmem initialization. The bootmem_free() call right
after the initialization was finding some bits to be set to 0, which didn't make sense since the
bitmap has just been memset'ed to 0xff. Except that due to the bug explained above, the
bitmap was in fact initialized to 0xff00ff00.

Thanks to Marek Vasut for his help and feedback.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Acked-by: NMarek Vasut <marex@denx.de>
Acked-by: NLey Foon Tan <lftan@altera.com>

Wire up preadv2/pwritev2 in the same way as preadv/pwritev. Fixes two
build warnings on ppc64.

mpe: Lightly tested with fio (slightly hacked to add the syscall
wrappers):

  fio-4217  [009] ....  1304.635300: sys_preadv2(fd: 3, vec:
  10025821de0, vlen: 1, pos_l: 6253000, pos_h: 0, flags: 1)
  fio-4217  [009] ....  1304.635474: sys_preadv2 -> 0x1000
Signed-off-by: NRui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This reverts commit 320d25b6.

This change was problematic for a couple of reasons:

1. It missed a some entry points (Xen things and 64-bit native).

2. The entry it changed can be executed more than once.  This isn't
   really a problem, but it conflated per-cpu state setup and global
   state setup.

3. It broke 64-bit non-NX.  64-bit non-NX worked the other way around from
   32-bit -- __supported_pte_mask had NX set initially and was *cleared*
   in x86_configure_nx.  With the patch applied, it never got cleared.
Reported-and-tested-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/59bd15f7f4b56b633a611b7f70876c6d2ad01a98.1461685884.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>