- 20 7月, 2007 40 次提交
-
-
由 Magnus Damm 提交于
This patch converts the cpu specific 7722 setup code to use the new intc controller. Many new vectors are added and also support for external interrupt sense configuration. So with this patch it is now possible to configure external interrupt pins as edge or level triggered using set_irq_type(). Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This is the second version of the shared interrupt controller patch for the sh architecture, fixing up handling of intc_reg_fns[]. The three main advantages with this controller over the existing ones are: - Both priority (ipr) and bitmap (intc2) registers are supported - External pin sense configuration is supported, ie edge vs level triggered - CPU/Board specific code maps 1:1 with datasheet for easy verification This controller can easily coexist with the current IPR and INTC2 controllers, but the idea is that CPUs/Boards should be moved over to this controller over time so we have a single code base to maintain. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
* Add ATA_PIO[0-6] defines to <linux/ata.h>. * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t. * Add PIO masks to host drivers. <linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ->host_flags to ide_hwif_t to store ide_pci_device_t.host_flags, assign it in setup-pci.c:ide_pci_setup_ports(). * Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags and teach ide_get_best_pio_mode() about them. Also remove needless !drive->id check while at it (drive->id is always present). * Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode() and then remove no longer needed ide_find_best_pio_mode(). There should be no functionality changes caused by this patch. Acked-by: NShtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode() and convert all users accordingly. * Remove no longer needed ide_pio_data_t. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_pio_cycle_time() helper. * Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers (previously cycle time given by the device was only used for "pio" == 255). * Remove no longer needed ide_pio_data_t.cycle_time field. v2: * Fix "ata_" prefix (Noticed by Jeff). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS. * Add IDE_HFLAG_SINGLE flag for single channel devices. * Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE and remove no longer needed ide_pci_device_t.channels field. v2: * Fix issues noticed by Sergei: - correct code alignment in scc_pata.c - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_dev_has_iordy() helper and use it sl82c105 host driver. * Remove no longer needed ide_pio_data_t.use_iordy field. v2/v3: * Fix issues noticed by Sergei: - correct patch description - fix comment in ide_get_best_pio_mode() v4: * Fix "ata_" prefix (Noticed by Jeff). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Print info about overriding PIO mode in ide_get_best_pio_mode(). * Remove info about overriding PIO mode from cmd64{0,x} host drivers. * Remove no longer needed ide_pio_data_t.overridden field. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Avi Kivity 提交于
Currently, CONFIG_X86_CMPXCHG64 both enables boot-time checking of the cmpxchg64b feature and enables compilation of the set_64bit() family. Since the option is dependent on PAE, and since KVM depends on set_64bit(), this effectively disables KVM on i386 nopae. Simplify by removing the config option altogether: the boot check is made dependent on CONFIG_X86_PAE directly, and the set_64bit() family is exposed without constraints. It is up to users to check for the feature flag (KVM does not as virtualiation extensions imply its existence). Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Serge E. Hallyn 提交于
When a CONFIG_USER_NS=n and a user tries to unshare some namespace other than the user namespace, the dummy copy_user_ns returns NULL rather than the old_ns. This value then gets assigned to task->nsproxy->user_ns, so that a subsequent setuid, which uses task->nsproxy->user_ns, causes a NULL pointer deref. Fix this by returning old_ns. Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Implement the cpu_clock(cpu) interface for kernel-internal use: high-speed (but slightly incorrect) per-cpu clock constructed from sched_clock(). This API, unused at the moment, will be used in the future by blktrace, by the softlockup-watchdog, by printk and by lockstat. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ralf Baechle 提交于
Since Ingo's recent scheduler rewrite which was merged as commit 0437e109 sched_cacheflush is unused. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Trond Myklebust 提交于
Fix a couple of bugs: - Don't rely on the parent dentry still being valid when the call completes. Fixes a race with shrink_dcache_for_umount_subtree() - Don't remove the file if the filehandle has been labelled as stale. Fix a couple of inefficiencies - Remove the global list of sillyrenamed files. Instead we can cache the sillyrename information in the dentry->d_fsdata - Move common code from unlink_setup/unlink_done into fs/nfs/unlink.c Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need a common structure for setting up an unlink() rpc call in order to fix the asynchronous unlink code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Since every invocation of xdr encode or decode functions takes the BKL now, there's a lot of redundant lock_kernel/unlock_kernel pairs that we can pull out into a common function. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jean Delvare 提交于
There are no users of i2c-isa left, so we can finally get rid of it. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Douglas Thompson 提交于
pci_ids.h needs two of the AMD NB device-ids namely, Addressmap and the Memory Controller devices This patch adds those to the pci_id.h include file Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jiang 提交于
Change error check and clear variable from an atomic to an int Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Uhlenkott 提交于
Here's a driver for the Intel 3000 and 3010 memory controllers, relative to today's Sourceforge code drop. This has only had light testing (I've yet to actually see it handle a memory error) but it detects my hardware correctly. Signed-off-by: NJason Uhlenkott <juhlenko@akamai.com> Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jiang 提交于
Provides a way for NMI reported errors on x86 to notify the EDAC subsystem pending ECC errors by writing to a software state variable. Here's the reworked patch. I added an EDAC stub to the kernel so we can have variables that are in the kernel even if EDAC is a module. I also implemented the idea of using the chip driver to select error detection mode via module parameter and eliminate the kernel compile option. Please review/test. Thx! Also, I only made changes to some of the chipset drivers since I am unfamiliar with the other ones. We can add similar changes as we go. Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
This is the code for the "lg.ko" module, which allows lguest guests to be launched. [akpm@linux-foundation.org: update for futex-new-private-futexes] [akpm@linux-foundation.org: build fix] [jmorris@namei.org: lguest: use hrtimers] [akpm@linux-foundation.org: x86_64 build fix] Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
lguest is a simple hypervisor for Linux on Linux. Unlike kvm it doesn't need VT/SVM hardware. Unlike Xen it's simply "modprobe and go". Unlike both, it's 5000 lines and self-contained. Performance is ok, but not great (-30% on kernel compile). But given its hackability, I expect this to improve, along with the paravirt_ops code which it supplies a complete example for. There's also a 64-bit version being worked on and other craziness. But most of all, lguest is awesome fun! Too much of the kernel is a big ball of hair. lguest is simple enough to dive into and hack, plus has some warts which scream "fork me!". This patch: This is the code and headers required to make an i386 kernel an lguest guest. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
Share a little common code, reverse the arguments for consistency, drop the unnecessary "inline", and lowercase the name. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
EX_RDONLY is only called in one place; just put it there. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
page-writeback accounting is presently performed in the page-flags macros. This is inconsistent and a bit ugly and makes it awkward to implement per-backing_dev under-writeback page accounting. So move this accounting down to the callsite(s). Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove is_in_rom() function. It doesn't actually serve the purpose it was intended to. If you look at the use of it _access_ok() (which is the only use of it) then it is obvious that most of memory is marked as access_ok. No point having is_in_rom() then, so remove it. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Change the m68knommu irq handling to use the generic irq framework. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
The print_stack_trace macro in stacktrace.h has a wrong number of arguments, fix it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
__acquire | lock _____ | \ | __contended | | | wait | _______/ |/ | __acquired | __release | unlock We measure acquisition and contention bouncing. This is done by recording a cpu stamp in each lock instance. Contention bouncing requires the cpu stamp to be set on acquisition. Hence we move __acquired into the generic path. __acquired is then used to measure acquisition bouncing by comparing the current cpu with the old stamp before replacing it. __contended is used to measure contention bouncing (only useful for preemptable locks) [akpm@linux-foundation.org: cleanups] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
- update the copyright notices - use the default hash function - fix a thinko in a BUILD_BUG_ON - add a WARN_ON to spot inconsitent naming - fix a termination issue in /proc/lock_stat [akpm@linux-foundation.org: cleanups] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Use the lockdep infrastructure to track lock contention and other lock statistics. It tracks lock contention events, and the first four unique call-sites that encountered contention. It also measures lock wait-time and hold-time in nanoseconds. The minimum and maximum times are tracked, as well as a total (which together with the number of event can give the avg). All statistics are done per lock class, per write (exclusive state) and per read (shared state). The statistics are collected per-cpu, so that the collection overhead is minimized via having no global cachemisses. This new lock statistics feature is independent of the lock dependency checking traditionally done by lockdep; it just shares the lock tracking code. It is also possible to enable both and runtime disabled either component - thereby avoiding the O(n^2) lock chain walks for instance. This patch: raw_spinlock_t should not use lockdep (and doesn't) since lockdep itself relies on it. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Harkes 提交于
Similar information can easily be obtained with strace -c. Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Harkes 提交于
The sb_info structure only contains a single pointer to the character device, there is no need for the added indirection. Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Harkes 提交于
We ignore signals for about 30 seconds to give userspace a chance to see the upcall. As we did not block signals we ended up in a busy loop for the remainder of the period when a signal is received. Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This changes the i386 linker script and the asm-generic macro it uses so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kawai, Hidehiro 提交于
This patch adds an interface to set/reset flags which determines each memory segment should be dumped or not when a core file is generated. /proc/<pid>/coredump_filter file is provided to access the flags. You can change the flag status for a particular process by writing to or reading from the file. The flag status is inherited to the child process when it is created. Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kawai, Hidehiro 提交于
This patch changes mm_struct.dumpable to a pair of bit flags. set_dumpable() converts three-value dumpable to two flags and stores it into lower two bits of mm_struct.flags instead of mm_struct.dumpable. get_dumpable() behaves in the opposite way. [akpm@linux-foundation.org: export set_dumpable] Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-